JCB Aero is experiencing high demand for MRO services and the first months of 2026 have started with all three slots in the hangar full. These projects have included maintenance, combined with modifications and refurbishments. One Airbus ACJ 318 underwent a C2 check...
With a strong start to 2026, AMAC Aerospace has completed several maintenance and refurbishment projects of different Bombardier aircraft models. A Bombardier Global Express arrived at the hangars in Basel, Switzerland, on drop-in notice for due maintenance and an...
AMAC Aerospace Turkey daily welcomes several Dassault Falcon aircraft to the hangar in Istanbul, but our services are not limited to support at our own facility. Over the past couple of months, several maintenance inputs have also been performed out-of-base at...
AMAC Aerospace Turkey continues to experience high demand for maintenance inspections at the facility in Istanbul. Throughout January-February, several checks were completed. A Dassault Falcon 2000s belonging to a long term customer underwent 12- and 24-month...
AMAC Aerospace is proud to announce a successfully completed cabin refurbishment and maintenance project on an Airbus ACJ319 at the hangars in Basel, Switzerland. The VIP cabin refurbishment was performed based on AMAC Aerospace’s design and according to the...
A long term customer’s Dassault Falcon 2000EX EASy arrived at AMAC Aerospace’s hangar in Istanbul, Turkey, by the end of December for line maintenance. AMAC Aerospace’s experienced team conducted an engine compressor desalination wash as per the requirements of the...
AMAC Aerospace Turkey welcomed a Boeing B737-800 to the hangar in Bodrum, Turkey, for a 10-year inspection. During the inspection, the aft and forward wet areas, galley, lavatories, seats and carpets were removed and reinstalled. Landing gear extension and retraction...
At the end of December, AMAC Aerospace welcomed several Dassault Falcon aircraft for 2-month inspections at the hangar in Istanbul, Turkey. One of the aircraft was a long term customer’s Dassault Falcon 7X. During its stay, the aircraft also received an engine...
AMAC Aerospace is pleased to have completed a major line maintenance work on a long term customer’s Dassault Falcon 900EX EASy at the hangar in Istanbul, Turkey. The scope of work included performing flight control system functional tests, downloading the cockpit...
AMAC Aerospace is pleased to have completed pre-purchase inspections (PPI) on 2x Bombardier Global 6000 aircraft. The first PPI, which was performed in December, was on a long-term customer's aircraft and was on Level 1. The second PPI was also a Level 1 inspection...
In mid-December, AMAC Aerospace Turkey, Istanbul, welcomed several Dassault Falcon 2000 aircraft for out-of-phase maintenance. One of the aircraft underwent a 200-600-flight-hour routine inspection, as well as minor inspections of both engines and lubrication of the...
Mr. Sébastien Kubler has now assumed the role of Chief Operating Officer (COO) at JCB Aero SAS. AMAC Aerospace are happy to report that the planned transition period in the operational leadership of JCB Aero SAS has now been completed. Sébastien’s continued leadership...
AMAC Aerospace welcomed 2x Bombardier Global Express XRS aircraft to the hangars in Basel, Switzerland, in mid-December. The first aircraft belongs to a new customer and underwent a 750-flight-hour inspection and due maintenance. AMAC Aerospace’s in-house battery...
In December, AMAC Aerospace welcomed several Airbus Corporate Jet aircraft to the hangars in Basel, Switzerland. A head of the state customer brought their ACJ330 in for A1 and A3 inspections, as well as Starlink installation. Starlink was also installed on a private...
In November/December, AMAC Aerospace redelivered several Gulfstream G450 aircraft after maintenance at the facility in Basel, Switzerland. One of the aircraft, belonging to a long term customer, came to AMAC Aerospace for defect rectification and a minor scheduled...
AMAC Aerospace is pleased to have redelivered a Dassault Falcon 7X and 8X after line maintenance at the hangar in Istanbul, Turkey. The lock switch on the F7X passenger door, as well as the wing fuel tank probe and the DME (distance measuring equipment) were reported...
At the end of December, AMAC Aerospace Basel, Switzerland, performed maintenance on 3x Gulfstream G550 aircraft. One of the aircraft belongs to a new customer who reached out to AMAC Aerospace for on-site support in Istanbul. The team traveled to Turkey to assist the...
A Boeing BBJ 737 from a long term customer arrived at AMAC Aerospace’s facility in Basel, Switzerland, for maintenance. The aircraft underwent a 1-month inspection and defect rectification. AMAC Aerospace’s team also replaced the aircraft’s tires and grey water valve....
A Dassault Falcon 2000EX EASy underwent defect rectification at AMAC Aerospace’s hangar in Istanbul, Turkey. The operator had reported a pressure relief valve (PRV) CAS message, so AMAC Aerospace’s team performed a detailed inspection and found that a faulty printed...
In mid-November, AMAC Aerospace Basel, Switzerland, redelivered 2x Bombardier Global aircraft – a Global 5000 and a Global 5500 – after successfully completing maintenance. The Bombardier Global 5000 belongs to a new customer of AMAC Aerospace and came in for a...
At the beginning of December, AMAC Aerospace Turkey, Istanbul, completed maintenance on a Dassault Falcon 8X and 7X aircraft. The operator of the F8X requested engine oil servicing during its brief stay in Istanbul. In parallel, a 2-month inspection was performed. The...
AMAC Aerospace is pleased to have completed maintenance on both a Bombardier Global 7500 and a Challenger 300. The Bombardier Global 7500 arrived at AMAC Aerospace’s hangars in Basel, Switzerland, for a pre-purchase inspection (PPI). After the inspection, the aircraft...
In late November, AMAC Aerospace Turkey performed several defect rectifications at the Istanbul hangar. A Dassault Falcon 2000EX EASy of a long term customer came to replace the VDR module. While the aircraft was there, AMAC Aerospace’s team found that one of the...
AMAC Aerospace have successfully completed a pre-purchase inspection (PPI) of a Bombardier Global 6000 at the hangar in Basel, Switzerland. The PPI was on Level 1. During the aircraft’s stay, AMAC Aerospace Bombardier team also conducted a 1000-flight-hour inspection...
AMAC Aerospace Turkey Istanbul welcomed 2x Dassault Falcon 2000 series aircraft for line maintenance at the end of November. One of the aircraft was a long term customer’s Dassault Falcon 2000S. This was the aircraft's first maintenance with this operator and new...
In December, AMAC Aerospace performed pre-purchase inspections (PPIs) on a Gulfstream G650 and a G550 at the hangars in Basel, Switzerland. Both PPIs were level 1. The G550 also underwent engine and auxiliary power unit (APU) borescope inspections. The clients were...
A Dassault Falcon 2000 belonging to a long term customer arrived at AMAC Aerospace Turkey’s hangar in Istanbul for a 12-month and 400-flight-hour inspection, including several servicing and cleaning tasks. AMAC Aerospace’s team performed lubrication of the landing...
At the end of November, AMAC Aerospace Basel, Switzerland, successfully completed maintenance checks on 2x Boeing B737 aircraft. One aircraft underwent a 1A inspection, while the other underwent A, B1, B2, B3, and B4 inspections. The two long term customers were...
AMAC Aerospace Turkey’s Istanbul team received a request from Dassault Falcon via the ASC network when a new customer’s Dassault Falcon 900EX EASy aircraft experienced an AOG situation in Erbil, Iraq. The starter generator did not engage during engine start, so AMAC...
A Bombardier Global Express from a new customer arrived at AMAC Aerospace’s facility in Basel, Switzerland, for maintenance inspections. The aircraft underwent 250-, 500-, 1500-, and 5000-flight-hour inspections, as well as a 15-month inspection. In addition, a floor...
AMAC Aerospace Turkey Istanbul is pleased to have supported 2x Dassault Falcon 900EX EASy customers in Ankara, Turkey, at the end of November. The first aircraft’s standby battery was not working properly, so AMAC Aerospace Turkey ordered a new unit and installed it...
In late November, 2x operators of Bombardier Challenger 605 aircraft contacted AMAC Aerospace’s team in Basel, Switzerland, for drop-in AOG support. The first aircraft belongs to a new customer who came for a navigation light change. The second aircraft belongs to a...
At the end of November, AMAC Aerospace Turkey, Istanbul, completed one of the most extensive maintenance projects for the Dassault Falcon 2000 series, working on an F2000. The aircraft underwent 12-, 24-, and 36-month inspections, as well as 1B, 1C, and 2C...
At the end of November, AMAC Aerospace’s Boeing team redelivered a Boeing B737 to a long term customer after successfully completing a C1 and C2 check, as well as interior modifications and refurbishment. The bulkhead was refurbished and the non-textile flooring (NTF)...
In late November, AMAC Aerospace Turkey welcomed 2x Dassault Falcon 8Xs to the hangar in Istanbul for line maintenance. The electronic databases of the aircraft were updated to the latest cycles as necessary. The first aircraft also underwent lavatory disinfection...
AMAC Aerospace is pleased to have completed maintenance, modifications and refurbishments on an Airbus A340. The head of state aircraft underwent a 4-year check at the hangar in Basel, Switzerland. During this time, the engine was removed and sent to the shop for...
AMAC Aerospace Turkey, Istanbul, has completed a 12-months and 800-flight hour inspection of a new customer’s Dassault Falcon 2000EX EASy aircraft. In parallel, AMAC Aerospace’s experienced team removed the current engine of the aircraft, which was a leasing unit, and...
AMAC Aerospace welcomed back a long-term customer's Airbus A330 from Asia to its hangars in Basel, Switzerland. AMAC Aerospace’s Airbus team performed A1, A2 and C1 checks on the aircraft as well as out-of-phase work. The private owner was pleased with the support and...
In mid-December, AMAC Aerospace Turkey, Bodrum, efficiently completed a C check on a Boeing B737-800. The check included the removal and installation of the aft/forward wet area, galley and lavatory, as well as landing gear extension/retraction tests and more. The...
AMAC Aerospace is proud to announce the first installation of the HDX satellite connectivity system. The system was installed on an Airbus A319 belonging to a long term customer at our hangars in Basel, Switzerland. This upgrade sets a new standard for passenger...
AMAC Aerospace is proud to announce the redelivery of a Boeing B737-400 in Bodrum, Turkey. The commercial aircraft underwent a C check. The scope of maintenance included removing and installing the cargo and auxiliary power unit (APU), as well as repairing the aileron...
In mid-November, AMAC Aerospace opened its hangar doors to welcome a new customers Bombardier Global Express XRS in Basel, Switzerland. One of the aircraft’s engines was faulty, so AMAC Aerospace’s technicians replaced it with a new one. The private owner was pleased...
In early November, AMAC Aerospace conducted a 2-month inspection of a Dassault Falcon 2000EX EASy, accompanied by flight control tasks at the hangars in Istanbul, Turkey. The long term customers crew reported that the radio altimeter system occasionally issued...
At the beginning of November, AMAC Aerospace Turkey, Istanbul, completed maintenance on several Dassault Falcon 8X and 7X aircraft. One Dassault Falcon 8X came for a 2-month inspection and periodic database updates. In addition, brake heat sink inspections were...
In mid-November, JCB Aero completed maintenance on an Airbus A318. JCB Aero’s skilled technicians performed a 6-month inspection and due maintenance tasks of the aircraft. The maintenance was completed on time and within budget and the aircraft returned to service.
At the beginning of December, AMAC Aerospace completed maintenance on a Boeing B737 from a long term commercial customer. The aircraft underwent a 12-year inspection at AMAC Aerospace’s hangar in Bodrum, Turkey. The scope of maintenance included forward and aft wet...
AMAC Aerospace Turkey, Istanbul, is pleased to have redelivered a Dassault Falcon 2000 to a long term customer. The crew of the privately owned aircraft reported a landing gear lock failure and the aircraft was jacked up for troubleshooting. AMAC Aerospace’s team...
In late October, a customer contacted JCB Aero for AOG support for their Airbus A320. JCB Aero accepted the request and welcomed the aircraft to their hangar in Auch, France. The aircraft had a tight flight schedule but JCB Aero succeeded to complete the maintenance...
A Dassault Falcon 900EX EASy arrived at AMAC Aerospace’s Istanbul hangar after the crew reported a digital data failure with the engine. AMAC Aerospace’s team performed troubleshooting and correctly tightened the connectors. Afterwards, the system continued to...
At the end of October, AMAC Aerospace completed maintenance on an Airbus A320 and Airbus A319 aircraft at the hangars in Basel, Switzerland. The Airbus A320 belongs to one of AMAC Aerospace’s long term customers and came in for a 6-month inspection. The Airbus A319...
AMAC Aerospace is pleased to have successfully completed a 12-year inspection and redelivery of an Airbus A320-200 at the hangars in Bodrum, Turkey. This aircraft is the sixth successfully completed redelivery under this ongoing project. The scope of work included...
JCB Aero is pleased to have completed maintenance on an Airbus A320 at the hangar in Auch, France. The aircraft came for an A check. During the inspection, corrosion was found and rectified by JCB Aero’s team. The cabin interior was cleaned and the paint and leather...
At the beginning of October, AMAC Aerospace redelivered three Dassault Falcon 7X aircraft after maintenance at the hangar in Istanbul, Turkey. The first Dassault Falcon 7X belongs to a new customer and AMAC Aerospace’s team performed a 2-month inspection while the...
Following initial certification in 2019 and a successful renewal in 2022, AMAC Aerospace is pleased to announce that the Basel facility has once again been awarded the ISO 45001 certification without any findings. “Obtaining again this Occupational Health and Safety...
AMAC Aerospace is pleased to have redelivered a Boeing B747 to a long term customer. The Head of State aircraft underwent a 6A inspection and had Starlink installed for internet connectivity. The maintenance was completed at the beginning of October, after which the...
AMAC Aerospace is pleased to have performed engine mount inspections on a Dassault Falcon 2000 and 2000EX EASy aircraft at the hangar in Istanbul, Turkey. The inspections were performed due to hard time component requirements. The F2000 engine was removed for NDT...
In mid-October, AMAC Aerospace completed maintenance on an Airbus A340-600 at the hangar in Basel, Switzerland. AMAC Aerospace’s experienced Airbus team performed 1A, 2A, 3A, 6A and 1C inspections of the aircraft. They found defects in the water system and rectified...
AMAC Aerospace Turkey, Istanbul, has completed heavy base maintenance on a Dassault Falcon 7X of a new European customer. The aircraft underwent a 12-month and 800-flight-hour inspection, as well as a 1B-2B letter check and several out-of-phase tasks. Several issues...
A customer from South Asia brought their Gulfstream IV to AMAC Aerospace in Basel, Switzerland, for maintenance. The aircraft underwent 1C, 6C and 2,000-flight cycle checks. During the inspections, AMAC Aerospace’s team found heavy corrosion on the stabilizers on both...
In mid-October, AMAC Aerospace Turkey, Istanbul, welcomed 3x Dassault Falcon 2000EX EASy aircraft from a long term customer. The first aircraft underwent several out-of-phase tasks due to requirements for airframe and components. While performing these tasks, a T1...
A Dassault Falcon 900EX EASy belonging to a long term customer arrived at AMAC Aerospace’s hangar in Istanbul, Turkey, for a 150-250-hour engine inspection. The engine generator brushes were also inspected and the three generator brushes were replaced because they...
At the end of September, JCB Aero completed maintenance of an Airbus A319 at the hangar in Auch, France. The aircraft underwent a 6- and 12-month inspection, as well as cabin refurbishment. The carpet was replaced and a divan was refurbished in collaboration with AMAC...
At the beginning of October, AMAC Aerospace’s Istanbul team performed maintenance on two Dassault Falcon 900EX EASy aircraft in Ankara, Turkey. The captain of one of the aircraft reported an AGM (Advanced Graphics Module) failure CAS (Crew Alert System) message and...
AMAC Aerospace welcomed a new customer’s Bombardier Global XRS to the hangars in Basel, Switzerland. AMAC Aerospace’s skilled team performed a 180-month inspection of the aircraft along with a Starlink installation. The inspection and modification were completed on...
At the end of September, the Boeing team at AMAC Aerospace Basel, Switzerland, redelivered a Boeing B737 to a long term customer after successfully completing A1 and A2 inspections. In parallel, two main wheel tires were replaced, the fuselage was polished, a flush...
A Bombardier Challenger 650 belonging to one of AMAC Aerospace’s long term customers arrived at the hangars in Basel, Switzerland. AMAC Aerospace’s team performed a 36-month inspection of the aircraft and replaced the nose wheel tires. The maintenance input was...
At the end of September, two maintenance projects on Gulfstream G650 aircraft were successfully accomplished. The first aircraft arrived at AMAC Aerospace’s hangars in Basel, Switzerland for due maintenance and a registration change. In addition, exterior paint was...
AMAC Aerospace Turkey, Istanbul, is pleased to have completed a Level 3 pre-purchase inspection (PPI) of a Dassault Falcon 2000S. The inspection revealed several findings which were raised to reflect the status of the aircraft. Cosmetic defects were reported to both...
AMAC Aerospace is pleased to have redelivered two Airbus A319s to long term customers. The first aircraft, which is privately owned, came to the hangars in Basel, Switzerland, for a fuel tank inspection. The second aircraft, which also belongs to a private owner,...
At the end of September, AMAC Aerospace redelivered two Dassault Falcon 7X aircraft to long term customers after performing line maintenance at the hangar in Istanbul, Turkey. The first aircraft came for a 600-flight hour inspection of the three engines. Some engine...
AMAC Aerospace Switzerland AG, an Aircraft Maintenance and Completion center based in Basel and Alpha Star, a leading private aviation operator based in Riyadh, Saudi Arabia, have entered an AOG Services agreement. Under the terms of the agreement, AMAC Aerospace...
AMAC Aerospace is pleased to announce that Airbus Corporate Jets (ACJ) has qualified AMAC Aerospace’s location in Bodrum, Turkey, as a new facility of its ACJ Services Centre Network. AMAC will provide to ACJ customers a wide spectrum of tailored capabilities –...
AMAC Aerospace Turkey, Bodrum, is pleased to announce the signing of a new four-year contract with SunExpress, a joint venture of Turkish Airlines and Lufthansa, starting this winter season. During the 2024-2025 season, AMAC Aerospace Turkey successfully fulfilled its...
KES is now part of the AMAC Group of Companies, it continues to operate as a stand-alone company under its own brand. For KES’s valued customers and partners, nothing will change, the same team will continue to deliver projects with the same quality, efficiency, and...
A new customer brought their Bombardier Global 7500 aircraft to AMAC Aerospace’s hangars in Basel, Switzerland. AMAC Aerospace’s team performed a registration change of the aircraft before redelivering it to the private owner. The customer was pleased with the...
In mid-September, AMAC Aerospace Turkey, Istanbul, performed out-of-phase tasks on a long term customer’s Dassault Falcon 900EX EASy during downtime in Ankara. A team was sent to Ankara-Esenboğa Airport where they conducted a 2-month inspection supported by a portable...
In mid-September, AMAC Aerospace welcomed a new customer’s Boeing B737 to the hangar in Basel, Switzerland. AMAC Aerospace’s technicians performed B2 and B3 inspections, as well as out-of-phase tasks on the aircraft. Before being released, two nose wheels were also...
In mid-September, AMAC Aerospace’s technicians in Basel, Switzerland, completed maintenance on two Gulfstream G550 aircraft. The first aircraft, which is owned by a head of state, long term customer, came for an annual inspection. The input was performed on time and...
AMAC Aerospace was happy to welcome back a long standing customer’s Gulfstream GV for an annual inspection. AMAC Aerospace’s skilled Gulfstream team also replaced the aircraft's exterior lights and fire extinguisher. The maintenance was completed in mid-September,...
AMAC Aerospace Turkey, Istanbul’s experts completed several out-of-phase airframe, component and engine tasks on a Dassault Falcon 900DX. Due to the aircraft having accumulated more flight hours than expected, the operator chose to increase the scope of maintenance...
At the end of August, AMAC Aerospace redelivered a Bombardier Global 6000 to a long term customer. The aircraft underwent 15-month, 500-, 1’000-, and 1’500-flight-hour inspections at AMAC Aerospace’s hangars in Basel, Switzerland. The project was completed on time and...
At the end of September, AMAC Aerospace Turkey, Bodrum, redelivered a privately owned Boeing B737-700IGW after completed a 12-year inspection. For the check, the entire cabin had to be removed and reinstalled. The scope of work also included a full dry area inspection...
AMAC Aerospace is pleased to have completed a pre-purchase inspection (PPI) of a Gulfstream G550. The inspection took place at AMAC Aerospace’s hangars in Basel, Switzerland. After the inspection, a registration change was performed and the aircraft was transferred to...
One of AMAC Aerospace Turkey’s loyal customers brought their Dassault Falcon 2000EX EASy aircraft to Istanbul for base maintenance. The aircraft underwent a 24-month and 3B inspection. During the inspections, the team also installed a 5G filter for the radio altimeter...
A Bombardier Global Express XRS underwent due maintenance at AMAC Aerospace’s facility in Basel, Switzerland. AMAC Aerospace’s team rectified issues with the aircraft’s windshield and satcom, as well as some cabin defects. The long term customer was pleased with the...
AMAC Aerospace Turkey is pleased to have redelivered 2x Dassault Falcon 2000 aircraft after out-of-phase maintenance at the hangar in Istanbul at the beginning of September. The first aircraft belongs to a long term customer and was prepared for storage. AMAC...
AMAC Aerospace is pleased to have completed a major repair of stringer cracks on a Boeing B747-8i at the hangar in Basel, Switzerland. The cracks were found across the aircraft fuselage during a maintenance check. The team immediately began performing detailed visual...
In mid-August, AMAC Aerospace Turkey, Istanbul, welcomed a Dassault Falcon 6X and 7X aircraft for database updates and line maintenance. The periodic database of the Dassault Falcon 6X was updated to the latest cycle. The aircraft’s landing gear and steering control...
AMAC Aerospace recently completed a pre-purchase inspection of a Bombardier Challenger 604 at the hangar in Basel, Switzerland. A detailed report was provided to the aircraft buyer, and the aircraft changed owners. Some corrosion was rectified before the aircraft was...
In August, AMAC Aerospace Turkey, Istanbul, welcomed a Dassault Falcon 8X from a long term customer of the AMAC Aerospace Group of Companies. AMAC Aerospace already support this customer with base maintenance in Basel, Bodrum and Auch and now also with Dassault Falcon...
JCB Aero proudly celebrates the first anniversary of its Part 145 approval for maintenance, repair and overhaul (MRO) operation. Since the new capability was launched, over 20 maintenance projects have been successfully completed by the company, while their...
GAMIT Ltd (an AMAC Aerospace Company), based in Stansted, UK has been awarded a five year contract to digitize the technical records of European Cargo’s fleet using the aerospace industry leading software produced by GAMIT called ROAM (Records Online Asset Management)...
AMAC Aerospace is proud to announce that we hold a Supplemental Type Certificate (STC) for the installation of Halon-free fire extinguishers. This STC covers a multitude of aircraft types, ensuring customers can make a smooth and safe transition following the upcoming...
AMAC Aerospace is pleased to announce the continued growth in requests for pre-purchase inspections (PPI), which are offered at several of their group’s locations. With increased demand from clients worldwide, AMAC Aerospace continues to provide spacious hangar...
AMAC Aerospace continues to experience high demand for connectivity installations and is proud to be at the forefront of digital cabin innovations. AMAC Aerospace is an authorized aviation integrator of Starlink installations and the first MRO to deliver KU-band Plane...
At the end of August, a maintenance project of a long term customer’s Boeing B737 was successfully accomplished. The aircraft underwent a 12-month base inspection, as well as due- and out-of-phase tasks. The cabin water system was modified, and the in-flight...
AMAC Aerospace Turkey is pleased to have redelivered a Dassault Falcon F2000EX EASy after maintenance at the Istanbul hangar. The aircraft was brought in because the rudder trim command was not working properly. AMAC Aerospace ordered parts from Dassault and replaced...
A new customer came to AMAC Aerospace in Basel, Switzerland, for maintenance inspections of their Airbus A320. The aircraft underwent a C check and 6-, 12-, and 60-month inspections. The project was completed at the end of August to the customer’s full satisfaction...
In mid-August, two maintenance inputs were performed on a long term customer’s Dassault Falcon F2000EX EASy. The aircraft arrived at AMAC Aerospace Turkey’s hangar in Istanbul, where cleaning of the electropneumatic and pneumatic valves were undertaken, as well as...
AMAC Aerospace was happy to welcome back a long term customer’s Boeing B777 to the hangars in Basel, Switzerland. The aircraft was scheduled for an 1A inspection. During the inspection, AMAC Aerospace’s technicians found issues with the water system and rectified...
During the summer time, AMAC Aerospace Turkey continued to support customers whose aircraft were grounded at holiday destinations. In mid-August, a long term customer contacted AMAC Aerospace Turkey from Dalaman, Turkey, because their Dassault Falcon F900EX EASy...
At the end of August, AMAC Aerospace Switzerland received short-notice requests for AOG support from two new customers for their Gulfstream aircraft. AMAC Aerospace accepted both aircraft, which arrived at the Basel hangars. One of the aircraft was a Gulfstream G650...
A new customer of a US-registered aircraft contacted AMAC Aerospace Turkey for AOG support. Their Dassault Falcon F900EX EASy aircraft experienced an AGM (Advanced Graphic Module) failure while flying in the Turkey region and was positioned at AMAC Aerospace’s...
JCB Aero opened its hangar doors to welcome an Airbus A319 in Auch, France. The aircraft underwent 6- and 36-month inspections, as well as out-of-phase tasks and minor modifications. A portable oxygen bottle and a tail camera were installed on the aircraft. The cabin...
AMAC Aerospace is pleased to have redelivered a Bombardier Challenger 605 to a long term customer. The aircraft arrived at AMAC Aerospace’s hangars in Basel, Switzerland, where the team performed a 48-month inspection. During its stay, the windshield was replaced. The...
AMAC Aerospace Turkey, Istanbul, completed 200-400 flight hour routine inspections of the engines of a Dassault Falcon F2000. In parallel, routine 2-month inspections and APU filter replacement were performed. During the inspections, it was found that the pilot...
A long term customer brought their Boeing B737 to AMAC Aerospace’s hangars in Basel, Switzerland for maintenance. The privately owned aircraft underwent 1A, 2A, and 4A checks. The customer was highly satisfied with the work, and has already planned to return in...
A long term customer brought their Dassault Falcon F2000EX EASy aircraft to AMAC Aerospace in Istanbul, Turkey. The team performed a borescope inspection of the engines and found that one of the engines had experienced material loss beyond acceptable limits. After...
AMAC Aerospace Turkey, Bodrum, who uses a mixed business model for their hangar facility and carries out commercial aviation line and base maintenance during the winter months and flip over to VIP business maintenance during the summer months, is pleased to announce...
AMAC Aerospace Turkey, Istanbul, is proud to announce the successful completion of three major aircraft checks in 2025, marking another milestone in the company’s ongoing commitment to providing world-class aviation services. The checks, which included a comprehensive...
JCB Aero, already renowned for their specialization in VIP and Airline aircraft cabin completion and refurbishment, expanded its operations by launching their MRO activities in mid-October 2024. Additionally, the recent acquisition of the significant engineering...
“Harnessing historical insight and intelligent automation to power the future of aircraft reliability” ROAM (Records Online Asset Management), the aerospace industry's most agile and intelligent aircraft records platform, is taking another giant leap forward—this...
AMAC Aerospace Turkey, Bodrum, was entrusted with a redelivery project involving seven Airbus A320 aircraft. They are pleased to announce that the fifth aircraft has now been completed, with the final two in the last stages of maintenance. This extensive project...
AMAC Aerospace’s headquarters in Basel, Switzerland, continues to accommodate client’s aircraft from all over the world. Recently, the second ACJ from the region of Singapore was delivered and the first Gulfstream from the same region was welcomed. The two ACJ319 have...
A new customer arrived at AMAC Aerospace’s hangars in Basel, Switzerland, at the end of July. Their Gulfstream G450 aircraft was due for its annual inspection which AMAC Aerospace’s Gulfstream team carried out. During the inspection, the team found issues with the...
AMAC Aerospace Turkey is pleased to have completed maintenance on several Dassault Falcon F2000 aircraft at the end of July. A Dassault Falcon F2000 of the original series came to the Istanbul hangar for an airframe inspection due to its high flight hours. The...
At the end of July, AMAC Aerospace opened its hangar doors in Istanbul, Turkey, to a long term customer’s Dassault Falcon F900EX EASy. The aircraft was experiencing high pressure valve failure in its engine, prompting the operator to ground the aircraft for defect...
In mid-July, AMAC Aerospace Turkey redelivered two Dassault Falcon F7X aircraft after maintenance at the hangar in Istanbul. The first aircraft belongs to a long term European customer. They chose to position their new Falcon 7X aircraft in Turkey so that AMAC...
At the end of July, AMAC Aerospace redelivered a Gulfstream V and IV-SP after maintenance at the hangar in Basel, Switzerland. The Gulfstream V, which is owned by a new customer of AMAC Aerospace, underwent due maintenance and a registration change. The Gulfstream...
A new customer arrived at AMAC Aerospace Turkey, Istanbul for maintenance on their Dassault Falcon F7X aircraft. The aircraft remained on the ramp while AMAC Aerospace Turkey’s team performed a decontamination of the fuel systems. A routine database update was also...
AMAC Aerospace Switzerland opened its hangar doors to a new customer’s Bombardier Challenger 605, which underwent several maintenance inspections. The team performed a 192-month check, followed by 96- and 48-month, as well as 400-, 600-, and 800-flight hour...
In mid-July, AMAC Aerospace Turkey welcomed a long term customer’s Dassault Falcon F2000EX EASy to the hangar in Istanbul. The aircraft was scheduled for minor defect rectification tasks. However, due to its high flight hours, the aircraft’s B inspection had to be...
At the beginning of August, AMAC Aerospace successfully completed maintenance on an aircraft returning to service after storage. The aircraft underwent a 12-month inspection where the team discovered landing gear issues caused by the long period of parking. The issues...
AMAC Aerospace is pleased to have completed maintenance on 2x Boeing B737s at the hangars in Basel, Switzerland. The first aircraft underwent an annual base maintenance check, as well as miscellaneous defect rectifications. The second aircraft underwent a B2...
At the beginning of July, AMAC Aerospace’s Bombardier team completed a Level 3 Pre-Purchase Inspection (PPI) on a Bombardier Global Express XRS. During the PPI, the team found corrosion on the thrust reverser and rectified it. They also performed some interior repairs...
AMAC Aerospace Turkey welcomed a long term customer’s Boeing B737-800 to the hangar in Bodrum. The aircraft underwent a C check and was redelivered by the end of June. The VVIP customer was pleased with the work, and the aircraft returned to its operation.
In July, AMAC Aerospace Basel, Switzerland, completed maintenance on 2x Airbus A320s. AMAC Aerospace’s team conducted a 12-month inspection on the first aircraft and redelivered it to the private owner on time and on budget. The second aircraft underwent a due...
A long term customer brought back their Dassault Falcon F2000EX EASy to AMAC Aerospace Turkey in Istanbul to replace its APU (auxiliary power unit). The APU had been removed a couple of months earlier and sent to the shop for repairs. During this time, the aircraft...
A long term customer contacted AMAC Aerospace for short notice AOG support on their Gulfstream G650. AMAC Aerospace welcomed the customer to the hangars in Basel, Switzerland. The aircraft had issues with its flaps, so AMAC Aerospace’s Gulfstream team replaced the...
AMAC Aerospace was happy to welcome back a long term customer’s Boeing B737 for maintenance. AMAC Aerospace’s Boeing team performed a B2 inspection on the privately owned aircraft. They also replaced the cockpit window and lubricated the engine N1 fan blades. Lastly,...
AMAC Aerospace Turkey, Istanbul, is pleased to have performed line maintenance on a privately owned Dassault Falcon F2000. The aircraft will be stored until its next C check later this year, and AMAC Aerospace Turkey’s team performed the necessary airframe, engine,...
The Bombardier team at AMAC Aerospace in Basel, Switzerland, redelivered 2x aircraft after successfully completed maintenance. One of the aircraft was a Bombardier Global 5000 that underwent a 250-hour inspection and countertop replacement. The second aircraft, a...
At the end of June, AMAC Aerospace Turkey, Istanbul, performed maintenance on a new customer’s Dassault Falcon F8X. The operator requested a troubleshooting for the weather radar system. In accordance with the aircraft manufacturer's recommendations, the weather radar...
In mid-June, AMAC Aerospace redelivered a Gulfstream G450 and a G550 after maintenance at the hangars in Basel, Switzerland. The Gulfstream G450 came for a 2C, 3C, and 24-month inspection. AMAC Aerospace’s Gulfstream team also repaired the aircraft’s flight controls...
AMAC Aerospace is pleased to have completed maintenance on a Bombardier Challenger 604 and 650 at the hangars in Basel, Switzerland. The Bombardier Challenger 604 underwent a 600-flight hour inspection as well as due maintenance tasks. The team rectified minor...
A long term customer arrived at AMAC Aerospace’s hangars in Istanbul, Turkey, for line maintenance on their Dassault Falcon F2000EX EASy aircraft. AMAC Aerospace’s experienced Dassault team performed a basic inspection and out of phase tasks. During the inspection,...
An Airbus A330 arrived for due maintenance work at AMAC Aerospace in Basel, Switzerland. AMAC Aerospace's Airbus team installed Starlink connectivity on the aircraft and also performed some cabin interior work. The maintenance was completed at the end of May, after...
AMAC Aerospace Turkey opened its hangar doors in Istanbul to a Dassault Falcon F900DX owned by a long term customer. The aircraft underwent a 2-month inspection and out of phase tasks. During the inspection, AMAC Aerospace Turkey’s Istanbul team found a fuel leak on...
AMAC Aerospace was happy to welcome a long term customer’s Boeing B737 to the hangars in Basel, Switzerland. The head of state aircraft underwent A1, B1, and B2 inspections. The maintenance was completed in mid-May, and the aircraft was redelivered on time and...
AMAC Aerospace welcomed a new customers Bombardier Global 5000 for maintenance in Basel, Switzerland. The aircraft underwent a 15-month check and an engine borescope inspection. After the inspections, AMAC Aerospace’s team conducted small due maintenance work. The...
At the end of June, AMAC Aerospace Turkey’s Istanbul team performed several 2-months inspections and out of phase tasks on Dassault Falcon aircraft. During the check of a Dassault Falcon F2000EX EASy, the team found a defective fuel gauge and replaced it with a...
AMAC Aerospace is pleased to have redelivered 2x Gulfstream aircraft after maintenance at the hangar in Basel, Switzerland. The first aircraft was a Gulfstream GV of a long term customer who came for a defect rectification on the exterior lighting electrical system....
In late June, AMAC Aerospace Turkey, Istanbul, conducted a 24-month inspection of a Dassault Falcon F7X. The aircraft also underwent periodic engine inspections and borescope tasks. Due to CH-05-20 component maintenance requirements, several components and hard time...
AMAC Aerospace is pleased to have redelivered a Bombardier Global Express XRS to a new customer. AMAC Aerospace’s experienced Bombardier team replaced the windshield due to old lamination and the flight spoiler actuator due to leakage. Several cockpit avionics...
AMAC Aerospace Turkey, Istanbul, is pleased to have redelivered 2x Dassault Falcon F2000 after line maintenance and defect rectification. One of the Dassault Falcon F2000 experienced air conditioning failure. Therefore, AMAC Aerospace Turkey’s Istanbul team performed...
In June, AMAC Aerospace Turkey welcomed a long term customers Dassault Falcon F7X twice to the hangar in Istanbul. On the first visit, AMAC Aerospace Turkey’s Istanbul team performed a troubleshooting due to a CAS message indicating a hydraulic pump failure. They...
At the end of May, AMAC Aerospace completed a 12-year inspection on an Airbus A320 owned by a head of state customer. In parallel, AMAC Aerospace’s technicians installed Starlink connectivity and upgraded the existing in-flight entertainment system. The cabin was also...
AMAC Aerospace Turkey has completed a 2C inspection of a new customer’s Dassault Falcon F2000. The aircraft also underwent landing gear and flight control component restoration. During the inspection, one engine was sent to the shop for a major periodic inspection...
A regular customer contacted AMAC Aerospace in need of AOG support for their Bombardier Challenger 350. AMAC Aerospace welcomed the ‘drop-in’ to the hangars in Basel, Switzerland, where the team rectified the wing anti-ice system. A few days later, the privately owned...
At the end of May, AMAC Aerospace Turkey, Istanbul, welcomed a Dassault Falcon F7X for maintenance. The aircraft underwent a 2-month inspection, fuel treatment, and window shade replacement. During the inspection, the team discovered that the flight control unit (FCU)...
AMAC Aerospace redelivered two privately owned Gulfstream GVs after maintenance inputs at the hangars in Basel, Switzerland. The first aircraft underwent a 500-, and 1000-flight hour inspection. In addition, sheet metal work was conducted on the thrust reverser doors....
AMAC Aerospace Turkey is pleased to have redelivered a Dassault Falcon F2000 and an F2000S after out of phase maintenance at the hangar in Istanbul. The Dassault Falcon F2000, owned by a new European customer, underwent oxygen servicing during a stop in Istanbul. The...
AMAC Aerospace was happy to welcome back a long term customers Airbus A320. During its stay at the hangars in Basel, Switzerland, the aircraft underwent an A1 and A2 check. During the checks, AMAC Aerospace’s technicians discovered corrosion on the wing’s trailing...
In late May, AMAC Aerospace completed maintenance on a Boeing B737 at the hangars in Basel, Switzerland. The privately owned aircraft underwent an A, B1, and B2 check, as well as an update of the airshow software. In addition, the tail camera was replaced, and the...
AMAC Aerospace Switzerland is pleased to have redelivered an Airbus A319 to a long term customer. AMAC Aerospace’s Airbus team performed an A1, A2, and A3 check of the aircraft. The maintenance was completed by the end of May, and the aircraft was redelivered on time...
At the end of May, AMAC Aerospace Turkey conducted maintenance on the engines of 2x Dassault Falcon F2000EX EASy aircraft at the hangar in Istanbul, Turkey. On one of the aircraft, AMAC Aerospace Turkey’s Istanbul team replaced both engine oil filters due to the...
AMAC Aerospace welcomed a Boeing B787 to the hangars in Basel, Switzerland. The privately owned aircraft underwent a 12-, 24-, and 36-month inspection. At the end of May, the maintenance was completed and the aircraft redelivered. The long term customer was very happy...
A long term customer contacted AMAC Aerospace Turkey, Istanbul, for out of phase tasks on their Dassault Falcon F7X aircraft. The aircraft was received with a fuel system failure so AMAC Aerospace Turkey’s team performed a troubleshooting. They replaced the center...
A new customer brought his Gulfstream G650 to AMAC Aerospace in Basel, Switzerland. AMAC Aerospace’s skilled Gulfstream team performed a flap rigging on the privately owned aircraft. The customer was pleased with AMAC Aerospace’s support and stated: “I am very happy...
A long term customer brought its Airbus A330 aircraft to AMAC Aerospace in Basel, Switzerland, for maintenance. The privately owned aircraft underwent an A1 and A3 check. In addition, AMAC Aerospace’s technicians removed the engines and replaced the pylon spigot...
End of May, AMAC Aerospace Turkey Istanbul opened its hangar doors for a new customer of a Dassault Falcon F7X. The aircraft underwent an oxygen system upgrade and received a new type of oxygen box and masks for the crew. During its stay at AMAC Aerospace Turkey,...
A Bombardier Global 6000 of a new customer arrived at AMAC Aerospace in Basel, Switzerland, at the beginning of April. AMAC Aerospace’s experienced Bombardier team conducted 15-month and 500-flight hour inspections of the privately owned aircraft. The customer was...
AMAC Aerospace Turkey, Istanbul, is pleased to have redelivered a Dassault Falcon F2000 after defect rectification. The brake unit of the privately owned aircraft was close to the wear limit, so AMAC Aerospace Turkey’s technicians replaced it with a serviceable unit....
AMAC Aerospace is proud to have redelivered an Airbus A320 to a long term customer. The head of state aircraft came to AMAC Aerospace in Basel, Switzerland, for a 6-month inspection and fuselage repair. In parallel, AMAC Aerospace team installed new 4K monitors. The...
AMAC Aerospace is pleased to have completed maintenance on a Boeing B747-400 at the hangars in Basel, Switzerland. The aircraft underwent a 6A inspection and received some minor cabin modifications- After two months of downtown, the aircraft was redelivered on budget,...
At the end of May, JCB Aero redelivered an Airbus A320 to a long term customer of the AMAC Aerospace Group. The aircraft arrived at the hangar in Auch, France, for a 6-month inspection and out of phase tasks. The customer was pleased with the support received from JCB...
AMAC Aerospace is pleased to have redelivered an Airbus A318 to a long term customer after maintenance. The privately owned aircraft arrived at AMAC Aerospace’s facility in Basel, Switzerland where it underwent a 4-month inspection and an engine borescope inspection....
AMAC Aerospace Turkey, Istanbul, were happy to welcome back a long term customers Dassault Falcon F2000. This time, the aircraft underwent a C check. It was the aircraft’s fifth C check during its lifetime, yet very few findings were identified. The maintenance was...
AMAC Aerospace is pleased to have completed maintenance on an Airbus A318 of a long term customer. AMAC Aerospace’s experienced Airbus team conducted a 12-year inspection of the aircraft at the hangars in Basel, Switzerland. In addition, the Airbus A318 underwent...
JCB Aero is pleased to have completed maintenance on a new customer’s Airbus A319. The skilled JCB Aero team conducted a 12-, 24-, and 36-month inspection of the aircraft. Additionally, vanish repairs were performed on the wardrobe doors at AMAC Aerospace Switzerland.
AMAC Aerospace have completed a Level 2 Pre-Purchase Inspection (PPI) on a Gulfstream G550. During the inspection, AMAC Aerospace’s experienced team found structural corrosion on the aircraft which they repaired. A registration change was also performed and the...
In early May, JCB Aero received a request for AOG support of an Airbus A320. JCB Aero welcomed the aircraft to the hangar in Auch, France and began the rectification process. The multi-mode receiver (MMR) needed to be replaced. The necessary parts were ordered and...
At the end of April, AMAC Aerospace redelivered a Boeing B737 after maintenance at the hangar in Basel, Switzerland. AMAC Aerospace’s experienced Boeing team conducted B1, B2, and B4 checks, as well as 2’000- and 4’000-flight hour checks, on the privately owned...
AMAC Aerospace is pleased to have completed maintenance on 2x Boeing B737 aircraft at the hangars in Basel, Switzerland. The first Boeing B737, owned by a long term customer, underwent an A, B1, and B2 check. On the second aircraft, AMAC Aerospace’s team performed a...
At the beginning of May, AMAC Aerospace redelivered 2x Gulfstream G550 aircraft. One of the aircraft came to AMAC Aerospace’s hangars in Basel, Switzerland, on short notice for a change of the cockpit side windows. The second Gulfstream G550 received a new exterior...
AMAC Aerospace Turkey, Istanbul, is pleased to have supported a customer in Ankara, Turkey with defect rectification on their Dassault Falcon F2000. The aircraft had issues with the primary flight display (PFD). AMAC Aerospace Turkey ordered new parts and replaced the...
In mid-April, JCB Aero redelivered an Airbus A318 to a long term customer of AMAC Aerospace Group of Companies. The aircraft underwent a 6-, 12-, and 14-month check. It also required an NDT inspection. An NDT technician from AMAC Aerospace Basel went to perform the...
At the beginning of April, AMAC Aerospace was pleased to have redelivered 3x Gulfstream IV’s back to their owners. The first Gulfstream IV was a privately owned aircraft that underwent a 2C base maintenance inspection. The second aircraft, owned by a long term...
In mid-May, AMAC Aerospace Turkey, Istanbul, redelivered a Dassault Falcon F2000EX EASy to a long term customer. The aircraft underwent several out-of-phase tasks, as well as engine minor inspections. Some findings were discovered which AMAC Aerospace discussed with...
In mid-April, AMAC Aerospace Turkey, Istanbul, welcomed a Dassault Falcon F2000 for a 12-month inspection. During the check, several cabin defects were discovered and rectified. Some of the cabin lights did not illuminate, therefore AMAC Aerospace Turkey replaced the...
JCB Aero is pleased to have redelivered an Airbus A319 after maintenance at the hangar in Auch, France. JCB Aero’s skilled technicians performed 1A, 6A, 12A, and 24A checks on the aircraft. In addition, out of phase tasks were performed and the tires changed on the...
AMAC Aerospace is proud to have redelivered a Boeing B737 to a long term customer after maintenance and refurbishment at the hangars in Basel, Switzerland. The privately owned aircraft underwent an C1 and C3 inspection, followed by landing gear overhaul. The engine...
AMAC Aerospace Turkey is pleased to have redelivered a Dassault Falcon F6X to a long term customer after maintenance at the hangar in Istanbul. The aircraft was facing an intermittent failure from time to time. Therefore, AMAC Aerospace Turkey’s technicians performed...
A long term customer brought his Bombardier Global 6000 to AMAC Aerospace’s hangars in Basel, Switzerland. The aircraft underwent a 120-month inspection. During the check, AMAC Aerospace’s team found corrosion which they rectified. In addition, the privately owned...
A Dassault Falcon F900EX EASy of a long term customer asked AMAC Aerospace Turkey Istanbul for maintenance support while the aircraft was in storage. AMAC Aerospace Turkey’s experienced technicians performed aircraft servicing tasks along with the database updates and...
AMAC Aerospace is proud to announce that it has successfully completed a repair of stringer cracks on a Boeing B747-8i. A total of 53 cracks were discovered in the stringers during a maintenance check by AMAC Aerospace’s technicians. Thanks to AMAC Aerospace’s...
In April 2025, AMAC Aerospace had the pleasure of hosting five Boeing B747’s simultaneously at its headquarter in Basel, Switzerland. This unique opportunity highlights the strength of AMAC Aerospace’s infrastructure and operational planning. The maintenance inputs...
AMAC Aerospace is widely recognized for its outstanding work on narrow- and wide-body aircraft. However, AMAC is also a strong and capable partner for mid-size aircraft, including Bombardier with a dedicated hangar at is facilities. For mid-size aircraft, AMAC...
AMAC Aerospace Turkey, Istanbul, has had a strong start to the year and has made significant achievements over the past 12-months. The facility, that provides MRO services on Pilatus and Dassault products, has performed several annual inspections on almost all types...
AMAC Aerospace Turkey, Bodrum has been busy over the last 12 months working on several projects. They have completed their first re-delivery project on a wide body aircraft for 2025: an Airbus A330. This project, which was carried out in collaboration with AMAC...
AMAC Aerospace Switzerland’s is proud to announce that its newly upgraded design studio is now fully operational, with an expanded team and increased space. AMAC Aerospace’s design capability lies in seamlessly transforming ideas into high-quality, actionable...
AMAC Aerospace continues to experience strong demand for maintenance inputs for a variety of aircraft models. Over the past 12 months, AMAC Aerospace Switzerland has completed maintenance work on more than 50x wide-body aircraft, more than 120x narrow-body aircraft,...
AMAC Aerospace is proud to announce that the construction of the expansion of the engineering building at its facility in Basel, Switzerland, which began in September 2024, has been completed. The new infrastructure includes a modern, three-story building in which the...
Over the past six months, GAMIT Ltd, part of the AMAC Aerospace Group, has experienced strong growth, driven by the continued success of its digital records management platform, ROAM. The platform has further established itself as a trusted solution for airlines,...
The transaction market in the private aviation sector is showing a clear revival. Forecasts predict market growth of around 30% in 2025. AMAC Aerospace is pleased to support this upswing with a broad range of services, solid technical expertise, and high flexibility...
In December 2024, AMAC Aerospace’s headquarter in Basel, Switzerland partnered with Airbus ACJ for their Service Center Network. Since MEBAA 2024 when AMAC Aerospace and Airbus ACJ signed the Service Center Network agreement, the two partners have worked tirelessly to...
AMAC Aerospace is proud to announce that over the past six months, the company has successfully completed numerous tailored SATCOM installations, supporting both traditional and next-generation systems, including Low Earth Orbit (LEO) constellations. With over 50x...
JCB Aero, part of the AMAC Aerospace Group, has made significant strides in 2024, marking a new chapter in its strategic development. The company successfully completed its first three Maintenance projects just a few weeks after opening its MRO operations at its new...
AMAC Aerospace is proud to announce the acquisition of KREATIVE ENGINEERING SERVICES (KES), located in L’Isle-Jourdain, in the south of France, on 16 May 2025. KES is a well-established, innovative, and highly experienced engineering firm specializing in the design...
At the beginning of April, AMAC Aerospace Turkey conducted line maintenance on a Dassault Falcon F2000EX EASy at the hangar in Istanbul. The aircraft underwent a 2-month inspection including a check of the oil level starter. Furthermore, the two main landing gear...
In mid-April, AMAC Aerospace welcomed a Boeing B737 to the hangars in Basel, Switzerland. AMAC Aerospace’s experienced technicians performed an A1 and A2 check on the aircraft. During its stay, the Boeing B737 also underwent overhaul of the nose wheel and the cockpit...
AMAC Aerospace Turkey were contacted by a long term customer at the end of March when the passenger seat on their Dassault Falcon F2000EX EASy failed to lock. The aircraft was at Sabiha Gökçen airport and AMAC Aerospace Turkey, Istanbul, directly sent a team to...
AMAC Aerospace’s Gulfstream team have conducted maintenance inspections on a Gulfstream G650. The aircraft underwent an 1A, 1C and 5C check at the hangars in Basel, Switzerland. The long term customer was very pleased with the work performed by AMAC Aerospace and the...
At the end of March, AMAC Aerospace Turkey redelivered 2x Dassault Falcon F2000EX EASy aircraft after routine line maintenance at the hangar in Istanbul. The first aircraft underwent a 2-month inspection. During the check, AMAC Aerospace Turkey’s Istanbul team...
AMAC Aerospace is pleased to have completed maintenance on a Bombardier Global 5000. The privately owned aircraft underwent a 1000-hour inspection at the hangars in Basel, Switzerland. The maintenance was completed at the end of March and the Bombardier Global 5000...
AMAC Aerospace Turkey, Istanbul, is pleased to successfully have completed a comprehensive 2C inspection on a Dassault Falcon F900EX EASy. During the check, AMAC Aerospace Turkey’s Istanbul team found corrosion and several structural findings on the aircraft, which...
AMAC Aerospace is proud to have worked five Boeing B747’s simultaneously at the headquarter in Basel, Switzerland. This landmark achievement demonstrates the operational capacity AMAC Aerospace Switzerland have for wide-body aircraft maintenance, completion and...
At the end of March, AMAC Aerospace Turkey, Istanbul, welcomed a Dassault Falcon F2000EX EASy of a long term customer to the hangar in Istanbul. The operator had been advised to remove the APU (auxiliary power unit) at an Authorized Service Center and chose to come to...
An Airbus A330 of a long term customer of AMAC Aerospace arrived in Basel, Switzerland to undergo maintenance checks. AMAC Aerospace’s Airbus team conducted an A7 and 1C check on the aircraft. The Head-of-State aircraft was released for operations at the beginning of...
AMAC Aerospace Turkey, Istanbul, have completed a 2-month inspection on a long term customer’s Dassault Falcon F900EX EASy. The privately owned aircraft was located in Ankara Esenboğa Airport, and AMAC Aerospace Turkey sent a team from Istanbul to Ankara to take care...
AMAC Aerospace is pleased to have released a Bombardier Global 6000 after a heavy base maintenance check at the hangars in Basel, Switzerland. The privately owned aircraft also had an engine problem which was repaired by Rolls-Royce. In addition, AMAC Aerospace’s team...
At the beginning of March, AMAC Aerospace Turkey, Istanbul, finalized maintenance on a Dassault Falcon F2000EX EASy and F2000. The Dassault Falcon F2000EX EASy pneumatic and electro pneumatic valves were checked for overpressure tightness. In parallel, a main landing...
At the end of March, AMAC Aerospace redelivered a Gulfstream G550 to a long term customer. The aircraft underwent an A and C check at the hangars in Basel, Switzerland. Before being redelivered to the private owner, the Gulfstream G550 also received a window change.
AMAC Aerospace Turkey, Istanbul is pleased to have redelivered a Dassault Falcon F900EX EASy back to a long term customer. The privately owned aircraft underwent a 500-600 flight hours engine inspection along with a regular battery check. During the maintenance,...
A long term customer brought his Bombardier Challenger 605 to AMAC Aerospace’s hangars in Basel, Switzerland. During its stay, the aircraft underwent a 6, 12, 24 and 36 month inspection. The project was completed at the end of February and the aircraft was redelivered...
At the end of February, AMAC Aerospace redelivered 3x Gulfstream aircraft after maintenance at the hangars in Basel, Switzerland. The first aircraft was a Gulfstream G550 of a private owner from the Middle East region, which came for a multiple C check package. The...
AMAC Aerospace is pleased to have performed maintenance on a McDonnell Douglas MD-87. The Head of State aircraft underwent an A1 and A2 check at the hangars in Basel, Switzerland. In addition, the aircraft’s AFT bulkhead was repaired and a windshield was replaced. The...
A Dassault Falcon F2000 of a private customer arrived at AMAC Aerospace Turkey’s hangar in Istanbul when its auxiliary power unit (APU) was on the hold item list. The operator decided to position the aircraft at AMAC Aerospace Turkey as it is an authorized service...
At the end of March, JCB Aero redelivered an Airbus A319 to a long term customer of the AMAC Aerospace Group of Companies. The aircraft arrived at JCB Aero in Auch, France for an A1, A2 and A4 check. During its stay, JCB Aero’s team also replaced the Airbus A319’s fan...
AMAC Aerospace is pleased to have completed maintenance on a Boeing B373 of a first time customer. The aircraft arrived at AMAC Aerospace’s hangars in Basel, Switzerland, where it underwent A, B, C1 and C2 checks. During the checks, AMAC Aerospace’s team found...
AMAC Aerospace Switzerland has redelivered 2x Boeing aircraft after maintenance checks. The first one was a Boeing B737 which underwent an A1 and A2 check. The Head of State customer was very happy with the maintenance and the aircraft returned to service on time. The...
A long term customer sent their Dassault Falcon F2000 to AMAC Aerospace Turkey’s facility in Istanbul for an 12-month and 800 flight hour annual inspection. During the inspection, the team discovered that the aircraft had corrosion in the nose landing gear bores....
In mid-February, AMAC Aerospace completed maintenance on a Boeing B737 at the hangars in Basel, Switzerland. AMAC Aerospace’s Boeing team performed an A1 and A2 base maintenance check and out of phase tasks on the aircraft. The Head of State, long term customer, was...
At the end of February, AMAC Aerospace Turkey welcomed a long term customer’s Dassault Falcon F6X. AMAC Aerospace Turkey’s skilled team cleaned the jet pump filters of the aircraft according to new aircraft requirements for the Dassault Falcon F6X model. During the...
AMAC Aerospace in Basel, Switzerland, has completed base maintenance including defect rectification on a Bombardier Global Express XRS. The privately owned aircraft underwent a tire change, slat rectification and PRM (Pressure Relief Mechanism) installation. The...
AMAC Aerospace is pleased to have redelivered an Airbus A320 to a long term customer after maintenance. The aircraft arrived at AMAC Aerospace’s hangars in Basel, Switzerland where it underwent an A1 and A2 check The customer was happy with AMAC Aerospace's support...
At the end of February, AMAC Aerospace Turkey, Istanbul, completed routine maintenance on 2x Dassault Falcon aircraft. The first aircraft was a Dassault Falcon F2000EX EASy which underwent a basic inspection along with several scheduled servicing and operational...
At the end of January, AMAC Aerospace redelivered 2x Gulfstream aircraft after maintenance at the hangars in Basel, Switzerland. One of the aircrafts, a Gulfstream G550 of a new customer, underwent due maintenance and the aircraft was polished with Xzilon. In...
A long term customer contacted AMAC Aerospace Turkey because their Dassault Falcon F7X was experiencing occasional electrical ground failures. The privately owned aircraft arrived at AMAC Aerospace Turkey’s hangar in Istanbul where the team troubleshot the aircraft....
An Airbus A340 arrived at AMAC Aerospace’s hangars in Basel, Switzerland for maintenance. AMAC Aerospace’s experienced technicians conducted a KA-band installation with an A-check on the aircraft. In addition, some minor cabin repairs were performed. The customer was...
A regular customer brought his Airbus A318 to AMAC Aerospace’s hangars in Basel, Switzerland. AMAC Aerospace’s Airbus team conducted an intensive troubleshooting and rectification of the aircraft's Satcom system. The rectification was completed in early January and...
A long term, private customer brought his Dassault Falcon F2000 to AMAC Aerospace Turkey’s hangar in Istanbul. The aircraft underwent a 200-600 hour routine engine inspections as well as checks of the flap screw jacks and functional tests of the telescopic ducts on...
A new customer contacted AMAC Aerospace in need of AOG support for their Bombardier Global 5000. AMAC Aerospace responded immediately and welcomed the aircraft to the facility in Basel, Switzerland, where the AOG support was successfully completed. The private owner...
In mid-February, AMAC Aerospace Turkey’s team in Istanbul performed several maintenance tasks on a Dassault Falcon F7X. The aircraft underwent a routine servicing inspection and scheduled work on the flap actuators. The EPS (Emergency Power supply) batteries were also...
The last video of our Annual Report Video Series features Rolf Heinzelmann, Senior Manager Mid Size Aircraft Maintenance and Support Shops, who highlights the company’s global recruitment efforts, partnerships with aviation schools, and in-house training programs....
AerData closure: Migrate from Stream to ROAM for a Smarter Future. As AerData’s Stream approaches its closure, we strongly encourage AerData customers to transition to ROAM, the next-generation digital records management platform. ROAM is designed to offer superior...
AMAC Aerospace Turkey is pleased to have successfully completed maintenance on a Boeing B737. The commercial aircraft came to AMAC Aerospace Turkey’s hangars in Bodrum where AMAC Aerospace Turkey’s experienced team performed a C check on the Boeing B737. At the...
AMAC Aerospace is pleased to have redelivered a Boeing B737 to a customer from Saudi Arabia. The aircraft came to AMAC Aerospace in Basel, Switzerland for its annual check. In parallel, the aircraft underwent overhaul of the cabin interior, the in-flight entertainment...
JCB Aero is pleased to have redelivered an Airbus A319 after maintenance at the hangar in Auch, France. JCB Aero’s skilled technicians performed a 6-month inspection on the aircraft. In addition, the aircraft underwent a nose landing gear and cockpit light...
At the end of December, AMAC Aerospace Switzerland successfully finalized the completion of an Airbus A319neo. The interior, designed by AMAC Aerospace's in-house design studio, presents an exceptional elegance, with carefully selected details that combine the highest...
A long term customer brought his Dassault Falcon F7X to AMAC Aerospace Turkey’s hangar in Istanbul for non-routine line maintenance. The aircraft experienced a fuel tank failure. Therefore, AMAC Aerospace Turkey’s Istanbul team replaced the center wing tank fuel gauge...
A long term customer brought his Airbus A320 to AMAC Aerospace in Basel, Switzerland for defect rectification. The aircraft experienced a Satcom connectivity problem, which AMAC Aerospace’s team repaired by rectifying the KA band system. A few days later, the head of...
In mid-February, AMAC Aerospace Turkey, Istanbul, performed a non-routine line maintenance on a Dassault Falcon F8X. The aircraft arrived at Atatürk Airport with a fuel gauge measure failure. AMAC Aerospace was in contact with Dassault Falcon regarding the failure and...
At the end of 2024, AMAC Aerospace redelivered 2x Bombardier aircraft to two regular customers after maintenance at the hangars in Basel, Switzerland. The first aircraft was a Bombardier Challenger 3500 of a private owner that came for a small maintenance package. The...
A long term customer brought his Dassault Falcon F900EX EASy to AMAC Aerospace Turkey, Istanbul. It first arrived for a 24-month inspection. In parallel, AMAC Aerospace’s skilled Dassault Falcon team performed a weight check and carbon seal health check as well as an...
The sixth video features our Director of Environment, Occupational Health & Safety, Security, and Facility, Philippe Schurrer, who discusses the expansion plans for Basel and the group, with a focus on safety, engineering, and sustainability. He highlights the...
In late December, AMAC Aerospace completed maintenance on a Gulfstream G450. The aircraft underwent a 16-year inspection and nose cowl repair at the hangars in Basel, Switzerland. During its stay, AMAC Aerospace’s team also installed Starlink on the aircraft. The...
At the end of January, AMAC Aerospace Turkey, Istanbul, completed maintenance on 2x Dassault Falcon F2000. Both of the aircraft came for 200-400 hour routine engine inspections. In addition, one of the aircraft underwent a main oxygen cylinder replacement as per the...
AMAC Aerospace is pleased to have redelivered an Airbus A330 to a long term customer. The aircraft came to AMAC Aerospace’s hangars in Basel, Switzerland for a 48-month inspection. AMAC Aerospace’s experienced Airbus team found corrosion on the T-CAS antenna which was...
AMAC Aerospace Turkey has performed out-of-phase maintenance on a Dassault Falcon F900EX EASy. The aircraft, which is in storage at AMAC Aerospace Turkey, Istanbul, underwent a 2-months inspection and engine preservation checks. In addition, a periodic database load...
In mid-December, AMAC Aerospace redelivered 2x Airbus A319 after maintenance inspections at the hangars in Basel, Switzerland. The first aircraft underwent a 24-month inspection. During the check, engine mount corrosion was found and rectified. In parallel, the...
In late November, AMAC Aerospace was contacted by a Head of State customer for AOG support. The aircraft arrived at AMAC Aerospace’s hangars in Basel, Switzerland, where the technicians immediately took care of the maintenance and the aircraft discrepancy was resolved...
AMAC Aerospace Turkey is pleased to have completed maintenance on a Dassault Falcon F2000. The aircraft arrived at AMAC Aerospace Turkey’s hangars in Istanbul for a routine 200, 400, and 800 hour engine inspection. During the inspections, the technicians found that...
AMAC Aerospace welcomed a Gulfstream GV to the hangars in Basel, Switzerland, for a drop-in project. The aircraft had an air intake engine defect which was repaired by AMAC Aerospace's Gulfstream team. The regular customer was pleased with the maintenance and the...
At the beginning of December, AMAC Aerospace redelivered 2x Bombardier Global Express XRS aircraft which arrived at AMAC Aerospace in Basel, Switzerland for drop-in projects. One of the aircraft came for defect rectification and the second for wheel replacement. Both...
AMAC Aerospace Turkey, Bodrum, is pleased to have redelivered 3x Boeing B737-800 aircraft to a long term, commercial customer. All of the three aircraft AMAC Aerospace Turkey for C checks. Due to the professional interaction with the customer, the projects were...
AMAC Aerospace has completed maintenance of a Bombardier Global 7500. The aircraft arrived at AMAC Aerospace’s facilities in Basel, Switzerland in mid-October as a drop-in project. During its stay, AMAC Aerospace’s Bombardier team installed an NTF (non-textile floor)...
AMAC Aerospace Turkey, Istanbul, is proud to have completed maintenance on its first Dassault Falcon 6X, which was also one of the first maintenance performed on this aircraft type in Europe. It is one of the latest Dassault Falcon aircraft types, of which Dassault...
A Boeing B737 of a customer from the Far East arrived at AMAC Aerospace in Basel, Switzerland for a maintenance input. AMAC Aerospace’s Boeing team conducted an A1, A2, A3, A4 and C1 check on the aircraft. The team made some findings with a lot of challenges but...
The fifth video of our seven-part Annual Report Video Series 2024 features our Head of Engineering & Certification & CVE, Mr. Roger Sandmann, who discusses how the engineering department operated in 2024 and provides insights into completed and ongoing...
A Dassault Falcon F2000EX EASy arrived at AMAC Aerospace Turkey, Istanbul, at the end of December. The aircraft underwent a 2-month inspection including VOR/ILS checks. In addition, the navigation module was replaced with a serviceable unit. AMAC Aerospace Turkey,...
AMAC Aerospace continues to experience high demand for Gulfstream G550 maintenance projects. At the end of November/beginning of December, 3x Gulfstream G550s were redelivered after maintenance at AMAC Aerospace’s hangars in Basel, Switzerland. One of the aircraft,...
AMAC Aerospace Turkey, Istanbul, were contacted by a long term customer when their Dassault Falcon F2000EX EASy faced a brake system failure on a trip to the Maldives. AMAC Aerospace Turkey’s goTEAM immediately flew to Male Velana International Airport to provide AOG...
One of AMAC Aerospace’s long term customers brought his Airbus A320 to AMAC Aerospace in Basel, Switzerland, where AMAC Aerospace’s skilled technicians performed a B-check. In parallel, the landing gear was overhauled and power hold up units were installed. In...
In mid-November, AMAC Aerospace Turkey welcomed a Boeing B737-800. The commercial aircraft underwent a C check at the hangar in Bodrum, Turkey. Just a couple of weeks later, the project was completed within the given turnaround time without any delays and the aircraft...
At the end of December, AMAC Aerospace Turkey redelivered a Dassault Falcon F2000EX EASy to a long term customer. The aircraft arrived at AMAC Aerospace Turkey’s hangar in Istanbul for a base maintenance including 12-month, 24-month, 1B and engine minor inspection....
AMAC Aerospace was pleased to welcome a Gulfstream G4 to the hangars in Basel, Switzerland for a Pre-Purchase Inspection. During its stay it also underwent due maintenance. A new owner was found for the aircraft and before being release, a registration change was...
In late December, two Dassault Falcon aircraft were redelivered after maintenance at AMAC Aerospace Turkey’s facilities in Istanbul. A Dassault Falcon F8X came for engine tasks and a borescope inspection of the combustion chamber. In addition, the main landing gear...
An Airbus A320 of a long term customer arrived at AMAC Aerospace in Basel, Switzerland. The aircraft underwent heavy maintenance and an A1, A2, A3, A4 and C1 check. During the checks, AMAC Aerospace’s team found that one of the engines had internal damage and the...
AMAC Aerospace Turkey welcomed 2x Dassault Falcon 900EX EASy to the hangar in Istanbul. One of the customers requested line maintenance on a very short notice. AMAC Aerospace Turkey received the call on Friday evening and by Monday noon, the maintenance was already...
AMAC Aerospace is proud to have redelivered a Gulfstream GIV to an African customer after the aircraft had been on ground for 2 years. The aircraft arrived at AMAC Aerospace’s hangars in Basel, Switzerland, for an extremely heavy maintenance package due to corrosion...
AMAC Aerospace Turkey, Istanbul, is pleased to have successfully supported a long term customer when they experienced an AOG with their Dassault Falcon 2000EX EASy during their flight schedule in Gaizantep, Turkey. Upon receiving the call, AMAC Aerospace Turkey...
A long term customer contacted AMAC Aerospace in need of AOG support for their Boeing B747. AMAC Aerospace’s skilled technicians performed a borescope inspection on the Head of State aircraft and the repair was completed over the weekend in order to get the aircraft...
At the beginning of December, AMAC Aerospace Turkey, Istanbul, redelivered a Dassault Falcon 2000EX EASy to a long term customer. The aircraft had several out of phase tasks including minor inspections of both engines, main battery restoration and telescopic ducts...
The fourth video of our seven-part Annual Report Video Series 2024 features our Director of Group Sales, Mr. Eric Hoegen, who discusses the completion market, various sales activities at AMAC, and the business aviation industry over the next few years, among other key...
In mid-November, AMAC Aerospace Turkey welcomed 2x Dassault Falcon 7X to the hangar in Istanbul, Turkey, for out of phase tasks. The first aircraft underwent a fuel treatment and scheduled fuel system tasks as per routine inspection requirements. On the second...
AMAC Aerospace is proud to have redelivered 2x Airbus A319 aircraft after maintenance in the hangars in Basel, Switzerland in November. The first Airbus A319 to leave was an aircraft of a long term customer from the Far East which arrived for an A1 check. The second...
During mid-November, AMAC Aerospace Turkey, Istanbul, completed several line maintenance activities on Dassault Falcon 2000 and 2000EX EASy aircraft. On a classic Falcon 2000 aircraft of a long term customer, a failure of the IRS (Inertial Reference System) warning...
In mid-November, AMAC Aerospace Turkey completed 3x Dassault Falcon 900EX EASy projects after maintenance at the hangar in Istanbul, Turkey. The first aircraft, of a long term customer, came for a 12-month inspection. The aircraft was released within the proposed...
AMAC Aerospace is pleased to have redelivered an Airbus A340 after maintenance at the hangars in Basel, Switzerland. The Head of State aircraft underwent an A-check and also had a KA-Band installed. The maintenance input was completed in mid-October and the aircraft...
AMAC Aerospace Turkey’s team in Istanbul continues to support its customers with line maintenance at various locations. In mid-November, they supported a long term customer based in Ankara with their Dassault Falcon 7X. In the beginning of November, AMAC Aerospace...
In mid-October, a long term customer brought his Airbus A320 to AMAC Aerospace in Basel, Switzerland. AMAC Aerospace’s skilled Airbus team conducted a 12-month check on the head of state aircraft. In addition, the carpet in the cabin of the aircraft was replaced. The...
At the end of October, AMAC Aerospace Turkey redelivered a Dassault Falcon 7X to a long term customer after defect rectification at the hangar in Istanbul, Turkey. AMAC Aerospace Turkey’s skilled team troubleshot the Auxiliary Power Unit (APU) and Generator Control...
The third video of our seven-part Annual Report Video Series 2024 features our Chief Operating Officer, Mr. Tarek Muhiddin, who discusses opportunities in the market, customer requests and main innovations in aviation business among other key topics. To watch the...
At the end of November, AMAC Aerospace completed a major repair on a Boeing B747-8 of a long term customer. The aircraft had suffered hail damage and AMAC Aerospace’s experienced Boeing team removed the aircraft’s elevators and flap fairings for repair. In parallel,...
In our second installment of our seven-part Annual Report Video Series 2024 AMAC Aerospace’s Group Chief Financial Officer, Mauro Grossi, offers a deep dive into emerging opportunities in international markets, addresses the recruitment challenges facing the aviation...
AMAC Aerospace is proud to announce the completion of an end-of-lease redelivery of an Airbus A330. The aircraft was the last one in a project of 5x Airbus A330 end-of-lease redeliveries. The aircraft underwent a comprehensive C-check and was repainted. The new...
At the end of November, AMAC Aerospace Turkey, Bodrum, efficiently completed a 12-year inspection and redelivery check on an Airbus A320ceo. This was the first of seven aircraft in an end-of-lease project of 7x Airbus A320. The scope of work also included a complete...
In late October, AMAC Aerospace completed 2x Airbus A319 maintenance projects at the hangars in Basel, Switzerland. Both of the aircraft underwent 12-year inspections. In addition, the nose wheel of one of the aircraft was replaced and the fuel tanks were cleaned of...
JCB Aero is pleased to already have redeliver its first 3 aircraft maintenance projects, just a few weeks after the opening of MRO operation in mid-October. The first aircraft was an Airbus A320 which arrived at JCB Aero in Auch, France for an A-check. During its...
A new customer arrived at AMAC Aerospace in Basel, Switzerland for maintenance on their Gulfstream G550. AMAC Aerospace’s experienced Gulfstream team performed a 1C and 2C check on the Head of State aircraft and redelivered it on time and on budget. The customer was...
We are pleased to present you an overview of some of the latest achievements at our Group of Companies over the past twelve months. This is a series of seven individual videos featuring engaging interviews with our management team. The videos provide insights into...
AMAC Aerospace are happy to report that we have entered into a firm relationship with Airbus ACJ for their Service Centre Network, for our Basel HQ, Switzerland. Our expertise in Maintenance related activities and our sought-after completion services are in world...
AMAC Aerospace Turkey, Istanbul, is pleased to have completed line maintenance and out-of-phase tasks on a Dassault Falcon 2000S. During its stay, the privately owned aircraft also received a FAST BOX 4G upgrade. AMAC Aerospace Turkey’s team installed a Data...
In mid-October, a long term customers Dassault Falcon 900EX EASy arrived at AMAC Aerospace Turkey’s facility in Istanbul for line maintenance. The aircraft was experiencing APU (Auxiliary Power Unit) shutdown problems. AMAC Aerospace Turkey’s team performed a very...
In mid-October, AMAC Aerospace redelivered 2x Bombardier Challenger 650 to two customers. One of the Bombardier Challenger 650 came to AMAC Aerospace’s hangars in Basel, Switzerland for a 12-month inspection. It also received a battery change before being redelivered...
GAMIT Ltd (an AMAC Aerospace Company), based in Stansted, UK has been awarded a long-term contract to digitize the technical records of SAS’s fleet using the aerospace industry leading software produced by GAMIT called ROAM (Records Online Asset Management) which is a...
At the beginning of October, AMAC Aerospace redelivered a Gulfstream GV to a private owner. The aircraft underwent a yearly inspection at AMAC Aerospace’s hangars in Basel, Switzerland. The project was completed on time and on budget and the customer was satisfied...
A new customer’s Bombardier Challenger 350 arrived at AMAC Aerospace’s hangars in Basel, Switzerland. During its stay, the privately owned aircraft underwent a 12-month inspection. The inspection was completed in early October and the aircraft was redelivered on time...
AMAC Aerospace is pleased to have redelivered an Airbus A320 to a long term customer. The aircraft arrived at AMAC Aerospace’s facility in Basel, Switzerland where the team conducted a fuel tank inspection on the government owned aircraft. Corrosion was found and...
AMAC Aerospace Turkey is pleased to have redelivered a Dassault Falcon 8X to a long term customer after troubleshooting and defect rectification. The aircraft arrived at AMAC Aerospace Turkey’s facility in Istanbul in early October. The privately owned aircraft was...
A Gulfstream GIV arrived at AMAC Aerospace in Basel, Switzerland for maintenance. The aircraft underwent a 72-month inspection and heavy corrosion rectification with non-destructive testing (NDT) work associated. In addition, the aircraft’s registration number was...
AMAC Aerospace welcomed a Bombardier Challenger 605 to the hangars in Basel, Switzerland. The privately owned aircraft underwent a 6-month inspection as well as a nose wheel tire change and battery replacement. At the end of September, the maintenance was completed...
AMAC Aerospace is pleased to have redelivered a Boeing B737 to a private owner. The aircraft arrived for due maintenance and was experiencing problems with the auxiliary fuel tank transfer. To rectify the issues, AMAC Aerospace’s experienced Boeing team replaced the...
AMAC Aerospace Turkey, Istanbul was contacted by a new customer who needed AOG support promptly. AMAC Aerospace Turkey reacted immediately and sent technicians to Bodrum where the aircraft was located. They also had support from AMAC Aerospace Turkey, Bodrum team. The...
At the end of September, AMAC Aerospace redelivered a Gulfstream G450 to a long term customer. The privately owned aircraft underwent a C1 and C2 check including out of phase tasks. In parallel, the wing AFT rebate flange was repaired and the LH wing channel was...
In mid-September, AMAC Aerospace redelivered a new customer’s Bombardier Global 5000 after several maintenance checks at the hangars in Basel, Switzerland. AMAC Aerospace’s Bombardier team conducted a 15- and 30-month inspection as well as a 4500, 2250, 1500, 1000...
AMAC Aerospace Turkey, Bodrum, is pleased to have redelivered an Airbus A330 to a new customer. The aircraft was one of five in an end-of-lease project. The aircraft underwent a 12-year inspection and redelivery check. It also received a new paint job. At the end of...
In mid-September AMAC Aerospace received a request for immediate AOG support on a Boeing B747-400. The aircraft was experiencing problems with the landing gear doors and AMAC Aerospace responded instantly and accepted the aircraft in Basel, Switzerland. The issue was...
At the beginning of October, AMAC Aerospace Turkey, Istanbul, performed line maintenance on a Dassault Falcon 7X with a very short ground time. The privately owned aircraft had minor defects and AMAC Aerospace Turkey’s team conducted several service and out of phase...
In mid-September, AMAC Aerospace received an AOG support request from a customer in Greece. Their Gulfstream G550 was experiencing fuel imbalance issues and the aircraft arrived at AMAC Aerospace’s hangars in Basel, Switzerland. The aircraft had scheduled flights with...
A Bombardier Global Express XRS arrived at AMAC Aerospace in Basel, Switzerland, for intermediate base maintenance. The aircraft underwent a 15-month check and also had a crack in the windshield, which AMAC Aerospace's team rectified by replacing the windshield. The...
JCB Aero attended the Cannes Yachting Festival, which took place from the 10th to 15th of September. With JCB Aero’s expertise in lightweight solutions acquired from the aerospace world, JCB Aero offers a high level of cabin interiors for the marine industry. During...
AMAC Aerospace was pleased to welcome back a Gulfstream G450 of a long term customer. The government owned aircraft arrived at the hangars in Basel, Switzerland for an annual inspection and avionics modification. In mid-September, the maintenance was completed on time...
In mid-August, AMAC Aerospace welcomed a new customer’s Boeing B737 for an annual check at the hangars in Basel, Switzerland. The Head of State aircraft also underwent an engine gearbox modification and a KA-band installation, which AMAC Aerospace’s experienced Boeing...
AMAC Aerospace is pleased to have completed a drop-in AOG support on a Bombardier Global 5000. AMAC Aerospace welcomed the aircraft at the hangars in Basel, Switzerland where the team found corrosion on the engines that needed to be repaired. At the end of September,...
Recently, JCB Aero has completed several refurbishment projects in cooperation with AMAC Aerospace Turkey, Istanbul, and is working to increase the cooperation even more. One of the recently completed projects was a Dassault Falcon 2000 where JCB Aero refurbished the...
GAMIT Ltd (an AMAC Aerospace Company), based in Stansted, UK has been awarded a long-term contract to digitize the technical records of Transavia France’s fleet using the aerospace industry leading software produced by GAMIT called ROAM (Records Online Asset...
An Airbus A318 arrived at AMAC Aerospace in Basel, Switzerland for maintenance. AMAC Aerospace’s Airbus team conducted an A2 check and installed Iridium Certus Satcom on the privately owned aircraft. The project was completed in early August and the Airbus A318 was...
AMAC Aerospace Turkey has redelivered a Dassault Falcon 2000S after maintenance at the hangar in Istanbul, Turkey. The privately owned aircraft arrived at AMAC Aerospace Turkey in mid-September for out-of-phase tasks. AMAC Aerospace Turkey’s Istanbul team conducted...
AMAC Aerospace welcomed a Gulfstream G550 to the hangars in Basel, Switzerland. The privately owned aircraft arrived for a due maintenance and in parallel also underwent paint rectification. The long term customer was satisfied with the work and the aircraft was...
AMAC Aerospace is pleased to have redelivered a Bombardier Global 6000 to a long term customer. The privately owned aircraft arrived at AMAC Aerospace’s hangars in Basel, Switzerland for an annual maintenance package. At the end of August, the maintenance was...
A long term customer contacted AMAC Aerospace in need of AOG support on an Airbus A320. The privately owned aircraft arrived at AMAC Aerospace’s hangars in Basel, Switzerland where it underwent galley repairs. In mid-August the AOG was completed and the aircraft...
One of AMAC Aerospace Turkey’s long term customers brought its Dassault Falcon 2000EX EASy to Istanbul, Turkey for routine base maintenance. AMAC Aerospace Turkey’s experienced technicians performed a 36-month inspection and heavy base maintenance on the airframe and...
In mid-August, AMAC Aerospace opened the hangar doors in Basel, Switzerland, for a Boeing B737. AMAC Aerospace’s experienced Boeing team conducted cosmetic work on the aircraft and only a few days later, the aircraft was back in operation. The customer was very...
In mid-August, AMAC Aerospace accepted an aircraft ‘drop-in’ for AOG support on a long term customers Bombardier Challenger 605. AMAC Aerospace welcomed the aircraft to the hangars in Basel, Switzerland, where the navigation display unit was replaced. Only a few days...
AMAC Aerospace Turkey, Istanbul, is pleased to have assisted a customer at Olbia Airport in Italy with an out of base AOG support on a Dassault Falcon 2000. AMAC Aerospace Turkey’s team from Istanbul conducted a troubleshooting & damage assessment on the aircraft...
JCB Aero, an AMAC Aerospace Company, is proud to announce that we are now operating Maintenance, Repair and Overhaul (MRO) activities at the hangar in Auch, France, which will allow us to further expand our services and capabilities to our existing and potential new...
A new customer contacted AMAC Aerospace Turkey for a pre-purchase inspection of a Dassault Falcon 7X. The privately owned aircraft arrived at AMAC Aerospace Turkey's facility in Istanbul in mid-August. After one week, the level 1 pre-purchase inspection was completed.
AMAC Aerospace is pleased to have redelivered a Bombardier Global Express XRS to a new customer. The privately owned aircraft arrived at AMAC Aerospace in Basel, Switzerland for a 15-month inspection with minor maintenance. At the end of August, the maintenance was...
A Boeing B737 of a long term customer arrived at AMAC Aerospace in Basel, Switzerland for heavy maintenance and cabin interior refurbishment. AMAC Aerospace’s experienced team conducted a C3 check and landing gear overhaul on the Head of State aircraft. A fuselage...
AMAC Aerospace Turkey, Istanbul, continues to experience high demand for AOG and line maintenance support. By the end of August, several Dassault Falcon line maintenance activities were performed at Atatürk Airport in Istanbul. One of the long-term Dassault Falcon...
AMAC Aerospace welcomed an Airbus A330 for a Pre-Purchase Inspection (PPI) at the hangars in Basel, Switzerland. In addition, AMAC Aerospace’s team conducted a 6A check on the aircraft and did some interior cosmetic work in the cabin. One of the divans was also...
In early August, a long term customer’s Dassault Falcon 900EX EASy arrived at AMAC Aerospace in Istanbul, Turkey. AMAC Aerospace Turkey’s experienced team conducted a 12-month check and heavy base maintenance on the airframe and engines. After one week on ground, the...
AMAC Aerospace is pleased to have completed heavy maintenance on a Boeing BBJ1 B737-700. The Head of State aircraft arrived at AMAC Aerospace in Basel, Switzerland for a B1, B2, C1 and C2 check. In addition, AMAC Aerospace’s team conducted several interior...
AMAC Aerospace has completed a maintenance 'drop-in' on a Bombardier Global 5000. AMAC Aerospace’s experienced team carried out troubleshooting on the aircraft to identify defects, which were then rectified. After two days, the Bombardier Global 5000 could go back to...
AMAC Aerospace Turkey is pleased to have redelivered 5x Boeing B737CL back to a commercial owner. The aircraft arrived at AMAC Aerospace Turkey’s hangars in Bodrum for heavy C-checks. In addition, one of the Boeing B737CL’s received a landing gear replacement. The 5...
AMAC Aerospace is pleased to have re-delivered a new customer’s Gulfstream G450. The aircraft underwent heavy maintenance at the hangars in Basel, Switzerland. AMAC Aerospace’s Gulfstream team conducted a 1C, 2C and 5C check on the G450. In addition, the engines were...
AMAC Aerospace Turkey Istanbul continues to handle several routine line maintenance projects. In mid-August, 2x Dassault Falcon 7X were returned to their owners after a visit at AMAC Aerospace Turkey’s hangars in Istanbul. One of the Dassault Falcon 7X came to AMAC...
AMAC Aerospace is pleased to conduct several pre-purchase inspections at the hangars in Basel, Switzerland. At the end of August, a pre-purchase inspection was completed of a Bombardier Global 6000 and is now waiting for a potential new owner to take over. “We have a...
In mid-August, AMAC Aerospace redelivered a Boeing B737-700 BBJ1 to a private owner. The aircraft came to AMAC Aerospace’s hangars in Basel, Switzerland for a 6, 12, 24 and 48-month maintenance inspection. During it’s stay AMAC Aerospace also performed a major...
AMAC Aerospace Turkey welcomed a Dassault Falcon F900DX to the facility in Istanbul for routine line maintenance. AMAC Aerospace’s team conducted a basic inspection including a regular check of the main batteries and 2-months inspection. In addition, the wheels were...
A privately owned Gulfstream G550 of an Australian customer arrived at AMAC Aerospace in Basel, Switzerland, for a scheduled maintenance package. During its stay, AMAC Aerospace’s team also performed a main wheel tire change on the G550. The aircraft was redelivered...
During the winter season 2023-2024, AMAC Aerospace Turkey, Bodrum conducted maintenance on 6x Boeing B737NG of a long term commercial customer. Three of the aircraft underwent 8-years checks, two 12-year C checks and one had a new main landing gear door installed. In...
A Bombardier Challenger 650 of a long term customer arrived at AMAC Aerospace in Basel, Switzerland for maintenance. AMAC Aerospace’s experienced Bombardier team conducted a 1200-hour and 2400-hour inspection on the aircraft. At the end of July, the maintenance was...
AMAC Aerospace AG are proud to announce that we have won additional land that will enable us to further expand our services and capabilities to our existing and potential new clients from our Bodrum (BJV) facility. Through a process of tendering, AMAC Aerospace worked...
A Bombardier Challenger 604 arrived at AMAC Aerospace in Basel, Switzerland for a 48-month check. During the check, AMAC Aerospace’s team found heavy fuselage structural corrosion on the aircraft. AMAC Aerospace cooperated with Bombardier to coordinate the repairs and...
AMAC Aerospace Turkey, Istanbul facility is pleased to have redelivered a Dassault Falcon 7X after AOG support. The long term customer contacted AMAC Aerospace Turkey, Istanbul on short notice and needed support in Ankara, Turkey. Istanbul facility immediately sent a...
AMAC Aerospace welcomed a Boeing BBJ1 B737-700 to the hangars in Basel, Switzerland. The aircraft underwent heavy maintenance including a 1A, 3C and 5C check. AMAC Aerospace team also conducted some cabin rework. They performed cabin defect rectification for wood and...
AMAC Aerospace Turkey, Istanbul continues the operation of supporting customers with line maintenance activities at Sabiha Gökçen Airport. The team take care of several Dassault Falcons, which are parked at Sabiha Gökçen Airport. AMAC Aerospace Turkey, Istanbul is...
In mid-July, a new customer’s Gulfstream GV arrived at AMAC Aerospace in Basel, Switzerland, for a short-notice drop-in maintenance. AMAC Aerospace team conducted non-destructive testing (NDT) and minor maintenance on the privately owned aircraft. After only a few...
AMAC Aerospace’s Istanbul team completed an AOG support on a Dassault Falcon 7X. The long term customer contacted AMAC Aerospace Istanbul after the aircraft suffered a bird strike. AMAC Aerospace sent a team to Ankara and replaced the slat on the 7X. At the beginning...
AMAC Aerospace opened the hangar doors for a Boeing B777 of a long term customer. The Head of State aircraft entered AMAC Aerospace for a cabin rectification and micro Quick Access Recorder (QAR) modification. In addition, AMAC Aerospace’s experienced team reinstalled...
A Gulfstream G550 arrived at AMAC Aerospace in Basel, Switzerland for a scheduled annual maintenance. AMAC Aerospace’s Gulfstream team conducted the maintenance and the G550 returned to service in early July. AMAC Aerospace is proud to continue to be the preferred MRO...
AMAC Aerospace has redelivered a Falcon 8X to a long term customer. The privately owned aircraft arrived at AMAC Aerospace’s facility in Istanbul, Turkey, for an engine periodic and airframe inspection. In mid-June, the aircraft was redelivered to its owner after less...
AMAC Aerospace has redelivered a long term customer’s Boeing B747-8 after maintenance at the hangars in Basel, Switzerland. AMAC Aerospace’s Boeing team conducted several checks on the aircraft, an A1, A3, B1, B2, B3, B4, C1 and C3 check. They also carried out a...
At the end of June, JCB Aero was contacted by a customer in the south of France to repair a wallpaper scratch on an Airbus A300. The aircraft had gained a scratch just prior to delivery, therefore JCB Aero quickly sent a team member to Toulouse to repair the damage....
AMAC Aerospace is proud to have redelivered an Airbus A319 to a customer from Asia. AMAC Aerospace’s Airbus team conducted a basic in-flight entertainment (IFE) and cabin management system (CMS) update, supplied by CCC and in parallel with a 144-month check. In...
A new customer contacted AMAC Aerospace in need of AOG support on a Bombardier Global Express XRS. On short notice, AMAC Aerospace’s Bombardier team welcomed the drop-in at the hangars in Basel, Switzerland. By mid-June, the aircraft was back in service. The number of...
AMAC Aerospace’s team in Istanbul has completed an AOG support on a Pilatus PC-24 in Riyadh, Saudi Arabia. The team conducted a fuel probe replacement and rectified some troubleshooting. After the troubleshooting, they replaced the PC-24's data processing computers....
At the end of June, AMAC Aerospace completed a maintenance project on a Gulfstream GV. During the aircrafts stay, AMAC Aerospace’s team made a lot of findings that had to be rectified. In order to complete the project within the initial ground time, AMAC Aerospace...
At the end of March, JCB Aero produced customized floorboards for a Boeing B737. The shape of the aircraft was not consistent, therefore JCB Aero had to modify each floorboard to fit the dimensions of the aircraft. Once completed, the panels were delivered to AMAC...
In mid-June, an Airbus A319 was redelivered to a long term customer. The privately owned aircraft underwent a A1, A2, A3 and C3 check at AMAC Aerospace in Basel, Switzerland. In parallel, AMAC Aerospace’s team refurbished the cabin seats and replaced the bladder tank....
AMAC Aerospace was once again selected to perform maintenance on a long term customer’s Gulfstream G450. One of AMAC Aerospace strengths is the vast experience and expertise on Gulfstream G450’s. The Head of State aircraft arrived at AMAC Aerospace for a 3C, 1C and 2C...
AMAC Aerospace has accomplished a due maintenance on an Airbus A330-200. During its stay, AMAC Aerospace’s experienced Airbus team also conducted a landing gear overhaul on the Head of State aircraft. The aircraft was delivered to the customer on time and on budget in...
GAMIT Ltd (an AMAC Aerospace Company), based in Stansted, UK has been awarded a long-term contract to digitize the technical records of flag carrier Air Tahiti Nui’s fleet using the aerospace industry leading software produced by GAMIT called ROAM (Records Online...
In mid-June, AMAC Aerospace in Basel, Switzerland, was contacted for a short-notice AOG support for an Airbus A320 of a long term customer. It was very important for the owner not to be on ground for a long period of time. Therefore, AMAC Aerospace quickly assembled a...
In mid-June, a Boeing B737-9, BBJ3 of a long term customer was redelivered after having undergone a heavy maintenance C3 check at AMAC Aerospace in Basel, Switzerland. AMAC Aerospace’s experienced Boeing team performed a landing gear overhaul and floorboard...
AMAC Aerospace was happy to welcome a long term customer’s Airbus A318 to the hangars in Basel, Switzerland. The privately owned aircraft underwent heavy maintenance and an ACT inspection. In parallel, the technicians upgraded the IFE system with new monitors and...
At AMAC Aerospace Switzerland, an Airbus A319 arrived for a 12 years check. The Head of State aircraft had a lot of corrosion that needed to be repaired before it could be returned to its owner. This required large amounts of work and in order to reduce the customer's...
AMAC Aerospace redelivered an Airbus A330 to a long-term customer at the beginning of June. The Head of State aircraft underwent a 48-month check including wet areas. During the check AMAC Aerospace team found a lot of structural corrosion which they repaired. In...
In early May, an Airbus A340 was redelivered to its owner after undergoing heavy repairs at AMAC Aerospace’s hangars in Basel, Switzerland. The experienced Airbus team conducted structural repairs due to corrosion on the aircraft. In addition, the engine and landing...
Mid June, an Airbus A320 was redelivered to its owner after undergoing several modifications at AMAC Aerospace’s hangars in Basel, Switzerland. The Head of State aircraft was partially converted from private to commercial operation and underwent heavy maintenance. Our...
AMAC Aerospace’s team in Istanbul continues to handle several AOG supports and are assisting customers around the world. At the end of May, a Dassault Falcon 7X was returned to service after undergoing AOG support by the Istanbul team. Another project is a long term...
In mid-May, AMAC Aerospace accepted a drop-in of a Gulfstream aircraft. The new customer had been advised to use AMAC Aerospace for maintenance and arrived with his Gulfstream GV at AMAC Aerospace in Basel, Switzerland. The maintenance was completed on time and after...
A Bombardier Global Express arrived at AMAC Aerospace in Basel, Switzerland, for AOG (Aircraft On Ground) support due to lighting strike damage. AMAC Aerospace liaised with Bombardier to fix the defect and conducted the repair in collaboration with their team. The...
This week, GAMIT’s Anthony Wilkinson had the pleasure of joining Condor’s Holger Barth (Head of AMOS Competence Center and Technical Archive) on stage at the Airline & Aerospace MRO & Flight Operations IT Conference in the Netherlands to discuss the...
AMAC Aerospace are delighted to report that our sister company JCB Aero will install a new COO in position. Mr. Frederic Dezauzier will be joining us as the Chief Operating Officer (COO) at JCB AERO in Auch, effective May 27, 2024. This appointment marks a significant...
AMAC Aerospace Turkey is proud to announce that it has successfully obtained approval for the state-of-the-art Dassault Falcon 6X, marking a significant milestone in the company's expansion and service capabilities. The first Falcon 6X worldwide is scheduled for...
AMAC Aerospace has signed a new contract for the full Refurbishment and Maintenance on a B747-8i that is operated by a head of state. The work entails a full refurbishment and some partial redesign of all zones and takes into account a refresh of the old design to the...
AMAC Aerospace Basel is experiencing a bustling period with over 30 aircraft undergoing maintenance or completion across our five hangars. Notably, two-thirds of these aircraft benefit from our one-stop-shop infrastructure, enabling simultaneous cabin or system...
AMAC Aerospace has been awarded a contract for a landing-gear replacement on a HoS Boeing 777-300ER, scheduled for June. This aircraft, featuring an AMAC VVIP cabin, has recently undergone a refurbishment to the customer's full satisfaction.
GAMIT Ltd (an AMAC Aerospace Company) based in Stansted, UK has been awarded a long-term contract to digitize the technical records of DRF Luftrettung’s fleet using the aerospace industry leading software produced by GAMIT called ROAM (Records Online Asset Management)...
AMAC Aerospace Bodrum, Turkey has been awarded a significant project involving the end-of-lease inspection for seven narrow-body Airbus aircraft. The program is set to commence in July 2024 and will keep the team engaged for the next twelve months. The project...
Tarek Muhiddin was appointed COO, for Basel, AMAC Aerospace at the beginning of the year, 2024. After successful achievements in gaining positive financial records, successful approval acquisitions, great new clients at our sister companies within the group, Tarek now...
AMAC Aerospace is nearing the completion of five A330 end-of-lease redeliveries, including comprehensive full-body C-Checks for a major western government. This project includes: Three aircraft painted in military colors. Two aircraft painted with the Canadian maple...
JCB Aero Secures Prestigious Contract for First-Class Cabins JCB Aero has won a significant deal with a top-tier global aviation firm to manufacture premium monuments for their first-class cabins. These monuments feature exclusive curtains from a renowned luxury...
AMAC Aerospace, Istanbul, Turkey is delighted to announce the successful completion of a comprehensive C-Check on a Falcon 2000 Classic series aircraft. In addition to the standard maintenance, the Falcon 2000 Classic underwent a significant interior upgrade. The...
At AMAC Aerospace in Basel, Switzerland, we get more and more requests for internet installations. Recently we have signed 3 contracts for installation of Satcom Direct’s Ku-band Tail Mount Antennas and we are the first MRO to install this technology on a Boeing...
At the end of April, a Boeing B747 of a long-term customer was returned to its owner. The Head of State aircraft underwent a 1C & 2C Checks with some partial cabin access and a minor modification in the cabin systems. After 3 months at AMAC Aerospace, the aircraft...
AMAC Aerospace is pleased to have installed a Ka-Band antenna on an Airbus A340. The Ka-Band system provides consistent and outstanding broadband internet speed, allowing passengers on board to use internet nearly as fast as on ground. With more than 45 installations...
AMAC Aerospace performed an annual maintenance inspection on a privately owned GIV in Basel, Switzerland. During its stay, the aircraft also underwent a wing fuel leak rectification and a landing gear inspection. The aircraft was released on time and on budget and...
AMAC Aerospace was happy to welcome a Gulfstream G450 from a South African customer. The aircraft arrived in Basel, Switzerland at the end of December for an annual maintenance inspection. In addition, AMAC Aerospace’s team replaced the aircraft’s thrust reverser. The...
AMAC Aerospace continues to handle several Gulfstream projects. One project is a long-term customer’s GIV, which is currently undergoing heavy repair. The aircraft’s full cabin has been removed and installation for refurbishing of the woodwork is taking place. In...
AMAC Aerospace are happy to welcome an Airbus A319neo of a long-term customer. The aircraft is currently undergoing a completion project in Basel, Switzerland. Special for this completion is that our team will install the latest generation broadband, the OneWeb...
Mid-March, a Gulfstream G650 of a long-standing customer arrived to AMAC Aerospace in Basel, Switzerland. The Head of State aircraft underwent several maintenance checks, a 1A, 2A, 1C, 2C, 5C, 10C and 600H APU checks. After 3 weeks on ground, the aircraft was released...
AMAC Aerospace Turkey proudly announces its sponsorship of the recent Dassault Maintenance and Operations Seminar, held in Paris on the 10th and 11th of April. As a leading provider of aviation maintenance, repair, and overhaul (MRO) services, AMAC Aerospace Turkey...
In February 2024, an unusual task was awaiting AMAC Aerospace’s experts in the hangars at Basel. An Airbus aircraft of a private customer was stripped of the cockpit and the window frame. During a maintenance input the technicians had detected severe heavy corrosion...
AMAC Aerospace has been selected for a 120-month inspection on a Global 6000. The selection for AMAC has been made due to AMAC`s expertise and dedicated team. AMAC have previously conducted several 120-month inspections, which has built up valuable experience to the...
At AMAC Aerospace in Basel, Switzerland, several wide-body aircraft are being served. Two ACJ340s are undergoing heavy base maintenance checks. The two wide body aircraft are placed in a specific way wingtip to wingtip in Hangar 2, one of three wide-body hangars in...
At the beginning of December, AMAC Aerospace redelivered a Boeing B747 to a long term customer after completing maintenance. The aircraft arrived at the hangars in Basel, Switzerland where it was jacked up and AMAC Aerospace's experienced Boeing team replaced the...
AMAC Aerospace has completed a maintenance project on a new customer’s Airbus A319. The aircraft arrived at AMAC Aerospace’s hangars in Basel, Switzerland, where it underwent a 144-month and 12-year maintenance inspection. At the end of November, the privately owned...
AMAC Aerospace has redelivered an Airbus A330 to a long term customer. The aircraft arrived at AMAC Aerospace’s hangars in Basel, Switzerland, where AMAC Aerospace’s team conducted heavy maintenance on the Airbus A330 after having identified a high level of findings...
A Boeing B777 arrived in Basel, Switzerland for a heavy repair. AMAC`s Boeing team had to conduct comprehensive structural work on the wings, one of the biggest tasks made since the company has been operating. The Head of State aircraft was returned to service at the...
AMAC Aerospace has completed a pre-purchase inspection of a Boeing B737 at the hangars in Basel, Switzerland. The new customer contacted AMAC Aerospace when the aircraft was blocked in the UK and AMAC Aerospace arranged an offsite event to ferry the Boeing B373 to...
At the end of September, AMAC Aerospace re-delivered an Airbus A320 back to their client. AMAC Aerospace`s qualified team performed a 12-year check on the privately-owned aircraft and carried out a re-skinning. Furthermore, the customer requested to add more seats to...
AMAC Aerospace is pleased to have redelivered a Boeing B737 to a long term customer. The aircraft was scheduled for a due maintenance package in Basel, Switzerland, but due to damages to the skin, AMAC Aerospace first conducted repairs in Saudi Arabia to allow a one...
AMAC Aerospace accepted an aircraft drop-in project on a Bombardier Global XRS. AMAC's long-standing customer had deficiencies on its aircraft to be rectified and AMAC was able to fix them within a short period of time. The aircraft, which is privately owned, was...
At the end of June, AMAC Aerospace redelivered an Airbus A319 after a maintenance check. AMAC's Airbus technicians performed a 1C- and 2C check and a landing gear change on the privately-owned aircraft. On the AMAC Pilatus PC-12, the AMAC team performed an annual...
A long-term customer of AMAC brought their Bombardier Global 6000 to Basel, Switzerland for carpet replacement. While the completion team was busy removing and installing a new carpet, AMAC's technicians performed a landing gear inspection as well as an overhaul and...
AMAC is proud to have successfully carried out the first replacement of a fan disc on a Bombardier Global XRS. At the beginning of July, AMAC Aerospace was able to take delivery of its first project from Rolls Royce as an authorized service center. A fan disk was...
What is more exciting than having a sneak-peak behind hangar doors at an airport? 40 pupils of the local Gulluk Primary school paid a visit to AMAC Aerospace Turkey in Bodrum. Mrs. Fatma Atabey Buldan, Contract Administrator/Document Controller, explained with...
AMAC Aerospace Turkey were happy to welcome the potential next talents in the aviation industry at their facility in Bodrum. 40 Students from the Kokpit Koleji in Mugla enjoyed a facility tour through the workshops and the hangar. They had the chance to watch the full...
