JCB Aero is experiencing high demand for MRO services and the first months of 2026 have started with all three slots in the hangar full. These projects have included maintenance, combined with modifications and refurbishments. One Airbus ACJ 318 underwent a C2 check...
AMAC Aerospace Turkey daily welcomes several Dassault Falcon aircraft to the hangar in Istanbul, but our services are not limited to support at our own facility. Over the past couple of months, several maintenance inputs have also been performed out-of-base at...
AMAC Aerospace Turkey continues to experience high demand for maintenance inspections at the facility in Istanbul. Throughout January-February, several checks were completed. A Dassault Falcon 2000s belonging to a long term customer underwent 12- and 24-month...
AMAC Aerospace is proud to announce a successfully completed cabin refurbishment and maintenance project on an Airbus ACJ319 at the hangars in Basel, Switzerland. The VIP cabin refurbishment was performed based on AMAC Aerospace’s design and according to the...
A long term customer’s Dassault Falcon 2000EX EASy arrived at AMAC Aerospace’s hangar in Istanbul, Turkey, by the end of December for line maintenance. AMAC Aerospace’s experienced team conducted an engine compressor desalination wash as per the requirements of the...
AMAC Aerospace is pleased to have completed a major line maintenance work on a long term customer’s Dassault Falcon 900EX EASy at the hangar in Istanbul, Turkey. The scope of work included performing flight control system functional tests, downloading the cockpit...
AMAC Aerospace is pleased to have completed pre-purchase inspections (PPI) on 2x Bombardier Global 6000 aircraft. The first PPI, which was performed in December, was on a long-term customer's aircraft and was on Level 1. The second PPI was also a Level 1 inspection...
AMAC Aerospace welcomed 2x Bombardier Global Express XRS aircraft to the hangars in Basel, Switzerland, in mid-December. The first aircraft belongs to a new customer and underwent a 750-flight-hour inspection and due maintenance. AMAC Aerospace’s in-house battery...
In December, AMAC Aerospace welcomed several Airbus Corporate Jet aircraft to the hangars in Basel, Switzerland. A head of the state customer brought their ACJ330 in for A1 and A3 inspections, as well as Starlink installation. Starlink was also installed on a private...
AMAC Aerospace is pleased to have redelivered a Dassault Falcon 7X and 8X after line maintenance at the hangar in Istanbul, Turkey. The lock switch on the F7X passenger door, as well as the wing fuel tank probe and the DME (distance measuring equipment) were reported...
A Dassault Falcon 2000EX EASy underwent defect rectification at AMAC Aerospace’s hangar in Istanbul, Turkey. The operator had reported a pressure relief valve (PRV) CAS message, so AMAC Aerospace’s team performed a detailed inspection and found that a faulty printed...
At the beginning of December, AMAC Aerospace Turkey, Istanbul, completed maintenance on a Dassault Falcon 8X and 7X aircraft. The operator of the F8X requested engine oil servicing during its brief stay in Istanbul. In parallel, a 2-month inspection was performed. The...
AMAC Aerospace is pleased to have completed maintenance on both a Bombardier Global 7500 and a Challenger 300. The Bombardier Global 7500 arrived at AMAC Aerospace’s hangars in Basel, Switzerland, for a pre-purchase inspection (PPI). After the inspection, the aircraft...
In late November, AMAC Aerospace Turkey performed several defect rectifications at the Istanbul hangar. A Dassault Falcon 2000EX EASy of a long term customer came to replace the VDR module. While the aircraft was there, AMAC Aerospace’s team found that one of the...
In December, AMAC Aerospace performed pre-purchase inspections (PPIs) on a Gulfstream G650 and a G550 at the hangars in Basel, Switzerland. Both PPIs were level 1. The G550 also underwent engine and auxiliary power unit (APU) borescope inspections. The clients were...
A Bombardier Global Express from a new customer arrived at AMAC Aerospace’s facility in Basel, Switzerland, for maintenance inspections. The aircraft underwent 250-, 500-, 1500-, and 5000-flight-hour inspections, as well as a 15-month inspection. In addition, a floor...
AMAC Aerospace Turkey Istanbul is pleased to have supported 2x Dassault Falcon 900EX EASy customers in Ankara, Turkey, at the end of November. The first aircraft’s standby battery was not working properly, so AMAC Aerospace Turkey ordered a new unit and installed it...
In late November, 2x operators of Bombardier Challenger 605 aircraft contacted AMAC Aerospace’s team in Basel, Switzerland, for drop-in AOG support. The first aircraft belongs to a new customer who came for a navigation light change. The second aircraft belongs to a...
At the end of November, AMAC Aerospace’s Boeing team redelivered a Boeing B737 to a long term customer after successfully completing a C1 and C2 check, as well as interior modifications and refurbishment. The bulkhead was refurbished and the non-textile flooring (NTF)...
In late November, AMAC Aerospace Turkey welcomed 2x Dassault Falcon 8Xs to the hangar in Istanbul for line maintenance. The electronic databases of the aircraft were updated to the latest cycles as necessary. The first aircraft also underwent lavatory disinfection...
AMAC Aerospace is pleased to have completed maintenance, modifications and refurbishments on an Airbus A340. The head of state aircraft underwent a 4-year check at the hangar in Basel, Switzerland. During this time, the engine was removed and sent to the shop for...
AMAC Aerospace Turkey, Istanbul, has completed a 12-months and 800-flight hour inspection of a new customer’s Dassault Falcon 2000EX EASy aircraft. In parallel, AMAC Aerospace’s experienced team removed the current engine of the aircraft, which was a leasing unit, and...
AMAC Aerospace welcomed back a long-term customer's Airbus A330 from Asia to its hangars in Basel, Switzerland. AMAC Aerospace’s Airbus team performed A1, A2 and C1 checks on the aircraft as well as out-of-phase work. The private owner was pleased with the support and...
In mid-November, AMAC Aerospace opened its hangar doors to welcome a new customers Bombardier Global Express XRS in Basel, Switzerland. One of the aircraft’s engines was faulty, so AMAC Aerospace’s technicians replaced it with a new one. The private owner was pleased...
In early November, AMAC Aerospace conducted a 2-month inspection of a Dassault Falcon 2000EX EASy, accompanied by flight control tasks at the hangars in Istanbul, Turkey. The long term customers crew reported that the radio altimeter system occasionally issued...
AMAC Aerospace Turkey, Istanbul, is pleased to have redelivered a Dassault Falcon 2000 to a long term customer. The crew of the privately owned aircraft reported a landing gear lock failure and the aircraft was jacked up for troubleshooting. AMAC Aerospace’s team...
At the end of October, AMAC Aerospace completed maintenance on an Airbus A320 and Airbus A319 aircraft at the hangars in Basel, Switzerland. The Airbus A320 belongs to one of AMAC Aerospace’s long term customers and came in for a 6-month inspection. The Airbus A319...
AMAC Aerospace is pleased to have successfully completed a 12-year inspection and redelivery of an Airbus A320-200 at the hangars in Bodrum, Turkey. This aircraft is the sixth successfully completed redelivery under this ongoing project. The scope of work included...
AMAC Aerospace is proud to announce the successful receipt of an EASA Supplemental Type Certificate (STC) for the world’s first VVIP-completed Airbus A350. This achievement represents a defining moment for the company and a significant milestone within the large-cabin...
In mid-October, AMAC Aerospace completed maintenance on an Airbus A340-600 at the hangar in Basel, Switzerland. AMAC Aerospace’s experienced Airbus team performed 1A, 2A, 3A, 6A and 1C inspections of the aircraft. They found defects in the water system and rectified...
In mid-October, AMAC Aerospace Turkey, Istanbul, welcomed 3x Dassault Falcon 2000EX EASy aircraft from a long term customer. The first aircraft underwent several out-of-phase tasks due to requirements for airframe and components. While performing these tasks, a T1...
A Dassault Falcon 900EX EASy belonging to a long term customer arrived at AMAC Aerospace’s hangar in Istanbul, Turkey, for a 150-250-hour engine inspection. The engine generator brushes were also inspected and the three generator brushes were replaced because they...
At the end of September, JCB Aero completed maintenance of an Airbus A319 at the hangar in Auch, France. The aircraft underwent a 6- and 12-month inspection, as well as cabin refurbishment. The carpet was replaced and a divan was refurbished in collaboration with AMAC...
At the beginning of October, AMAC Aerospace’s Istanbul team performed maintenance on two Dassault Falcon 900EX EASy aircraft in Ankara, Turkey. The captain of one of the aircraft reported an AGM (Advanced Graphics Module) failure CAS (Crew Alert System) message and...
AMAC Aerospace welcomed a new customer’s Bombardier Global XRS to the hangars in Basel, Switzerland. AMAC Aerospace’s skilled team performed a 180-month inspection of the aircraft along with a Starlink installation. The inspection and modification were completed on...
At the end of September, the Boeing team at AMAC Aerospace Basel, Switzerland, redelivered a Boeing B737 to a long term customer after successfully completing A1 and A2 inspections. In parallel, two main wheel tires were replaced, the fuselage was polished, a flush...
AMAC Aerospace Turkey, Istanbul, is pleased to have completed a Level 3 pre-purchase inspection (PPI) of a Dassault Falcon 2000S. The inspection revealed several findings which were raised to reflect the status of the aircraft. Cosmetic defects were reported to both...
At the end of September, AMAC Aerospace redelivered two Dassault Falcon 7X aircraft to long term customers after performing line maintenance at the hangar in Istanbul, Turkey. The first aircraft came for a 600-flight hour inspection of the three engines. Some engine...
AMAC Aerospace Turkey, Bodrum, is pleased to announce the signing of a new four-year contract with SunExpress, a joint venture of Turkish Airlines and Lufthansa, starting this winter season. During the 2024-2025 season, AMAC Aerospace Turkey successfully fulfilled its...
AMAC Aerospace continues to offer a broad portfolio of services that clients around the world regularly rely on. Among these the Pre-Purchase Inspection (PPI) has become increasingly popular reflecting the growing trust customers place in AMAC Aerospace’s technical...
AMAC Aerospace continues to invest in its engineering department in Basel, Switzerland, and is proud to have one of the largest aviation engineering hubs in Europe. As part of AMAC Aerospace’s investment of the engineering department, a new, purpose-built engineering...
AMAC Aerospace Turkey, Istanbul, has made significant achievements during 2025 so far and is reaching record numbers. Several maintenance projects have been completed onsite in the hangar and around the world. In total, over 400 projects have been completed. From...
AMAC Aerospace proudly reaffirms its long-standing commitment to Bombardier aircraft owners across the globe further strengthening its position as a trusted partner for midsize jet maintenance, refurbishment, and support. In recent years AMAC Aerospace has seen a...
JCB Aero is proud to announce a successful year so far of MRO activities combined with the traditional high end cabin design, engineering and production activities. JCB Aero launched its maintenance, repair and overhaul (MRO) operations in October 2024 and has since...
AMAC Aerospace has experienced a continued high demand for maintenance on all aircraft types so far this year and is proud to announce that we have completed over 150+ maintenance projects, so far. Of the more than 150 completed projects in 2025, several milestones...
AMAC Aerospace is proud to announce that it has received an extension to its existing approval from the General Authority of Civil Aviation (GACA). This expanded certification further enhances AMAC Aerospace’s maintenance capabilities and reinforces its strong...
AMAC Aerospace’s Design Studio operates at the intersection of creativity and technology, specializing in Completion as well as Refurbishment and Minor Modifications. In the field of Completion, AMAC Aerospace transforms “green” aircraft (aircraft without interiors)...
KES is now part of the AMAC Group of Companies, it continues to operate as a stand-alone company under its own brand. For KES’s valued customers and partners, nothing will change, the same team will continue to deliver projects with the same quality, efficiency, and...
Over the past 12 months, AMAC Aerospace has developed increased support with it’s Parts & Services team demonstrating dedication, precision and a global presence. They have expanded their field support and aftermarket services to ensure that their customers' aircraft...
AMAC Aerospace is capable of installing a wide range of modern connectivity solutions depending on customer preferences and the technical requirements of the aircraft type. From the initial concept phase through technical planning to the final commissioning, AMAC...
GAMIT, a trusted name in aviation support and a member of the AMAC Aerospace Group, proudly announces ROAM V2, the next-generation platform for intelligent aircraft records management. ROAM (Records Online Asset Management) has become the backbone of digital records...
GAMIT achieved its highest-ever volume of aircraft spare-parts deliveries in 2025, marking a 32% increase in global part and component support for both VIP and commercial operators compared to 2024. This exceptional growth was fueled by the expansion of their...
A new customer brought their Bombardier Global 7500 aircraft to AMAC Aerospace’s hangars in Basel, Switzerland. AMAC Aerospace’s team performed a registration change of the aircraft before redelivering it to the private owner. The customer was pleased with the...
AMAC Aerospace was happy to welcome back a long standing customer’s Gulfstream GV for an annual inspection. AMAC Aerospace’s skilled Gulfstream team also replaced the aircraft's exterior lights and fire extinguisher. The maintenance was completed in mid-September,...
At the end of August, AMAC Aerospace redelivered a Bombardier Global 6000 to a long term customer. The aircraft underwent 15-month, 500-, 1’000-, and 1’500-flight-hour inspections at AMAC Aerospace’s hangars in Basel, Switzerland. The project was completed on time and...
At the end of September, AMAC Aerospace Turkey, Bodrum, redelivered a privately owned Boeing B737-700IGW after completed a 12-year inspection. For the check, the entire cabin had to be removed and reinstalled. The scope of work also included a full dry area inspection...
One of AMAC Aerospace Turkey’s loyal customers brought their Dassault Falcon 2000EX EASy aircraft to Istanbul for base maintenance. The aircraft underwent a 24-month and 3B inspection. During the inspections, the team also installed a 5G filter for the radio altimeter...
AMAC Aerospace is pleased to have completed a major repair of stringer cracks on a Boeing B747-8i at the hangar in Basel, Switzerland. The cracks were found across the aircraft fuselage during a maintenance check. The team immediately began performing detailed visual...
In mid-August, AMAC Aerospace Turkey, Istanbul, welcomed a Dassault Falcon 6X and 7X aircraft for database updates and line maintenance. The periodic database of the Dassault Falcon 6X was updated to the latest cycle. The aircraft’s landing gear and steering control...
At the end of August, a maintenance project of a long term customer’s Boeing B737 was successfully accomplished. The aircraft underwent a 12-month base inspection, as well as due- and out-of-phase tasks. The cabin water system was modified, and the in-flight...
AMAC Aerospace Turkey is pleased to have redelivered a Dassault Falcon F2000EX EASy after maintenance at the Istanbul hangar. The aircraft was brought in because the rudder trim command was not working properly. AMAC Aerospace ordered parts from Dassault and replaced...
AMAC Aerospace was happy to welcome back a long term customer’s Boeing B777 to the hangars in Basel, Switzerland. The aircraft was scheduled for an 1A inspection. During the inspection, AMAC Aerospace’s technicians found issues with the water system and rectified...
During the summer time, AMAC Aerospace Turkey continued to support customers whose aircraft were grounded at holiday destinations. In mid-August, a long term customer contacted AMAC Aerospace Turkey from Dalaman, Turkey, because their Dassault Falcon F900EX EASy...
JCB Aero opened its hangar doors to welcome an Airbus A319 in Auch, France. The aircraft underwent 6- and 36-month inspections, as well as out-of-phase tasks and minor modifications. A portable oxygen bottle and a tail camera were installed on the aircraft. The cabin...
AMAC Aerospace Turkey, Istanbul, completed 200-400 flight hour routine inspections of the engines of a Dassault Falcon F2000. In parallel, routine 2-month inspections and APU filter replacement were performed. During the inspections, it was found that the pilot...
A long term customer brought their Boeing B737 to AMAC Aerospace’s hangars in Basel, Switzerland for maintenance. The privately owned aircraft underwent 1A, 2A, and 4A checks. The customer was highly satisfied with the work, and has already planned to return in...
At the end of July, AMAC Aerospace opened its hangar doors in Istanbul, Turkey, to a long term customer’s Dassault Falcon F900EX EASy. The aircraft was experiencing high pressure valve failure in its engine, prompting the operator to ground the aircraft for defect...
In mid-July, AMAC Aerospace Turkey redelivered two Dassault Falcon F7X aircraft after maintenance at the hangar in Istanbul. The first aircraft belongs to a long term European customer. They chose to position their new Falcon 7X aircraft in Turkey so that AMAC...
At the end of July, AMAC Aerospace redelivered a Gulfstream V and IV-SP after maintenance at the hangar in Basel, Switzerland. The Gulfstream V, which is owned by a new customer of AMAC Aerospace, underwent due maintenance and a registration change. The Gulfstream...
A long term customer brought back their Dassault Falcon F2000EX EASy to AMAC Aerospace Turkey in Istanbul to replace its APU (auxiliary power unit). The APU had been removed a couple of months earlier and sent to the shop for repairs. During this time, the aircraft...
A long term customer contacted AMAC Aerospace for short notice AOG support on their Gulfstream G650. AMAC Aerospace welcomed the customer to the hangars in Basel, Switzerland. The aircraft had issues with its flaps, so AMAC Aerospace’s Gulfstream team replaced the...
AMAC Aerospace was happy to welcome back a long term customer’s Boeing B737 for maintenance. AMAC Aerospace’s Boeing team performed a B2 inspection on the privately owned aircraft. They also replaced the cockpit window and lubricated the engine N1 fan blades. Lastly,...
AMAC Aerospace Turkey, Istanbul, is pleased to have performed line maintenance on a privately owned Dassault Falcon F2000. The aircraft will be stored until its next C check later this year, and AMAC Aerospace Turkey’s team performed the necessary airframe, engine,...
The Bombardier team at AMAC Aerospace in Basel, Switzerland, redelivered 2x aircraft after successfully completed maintenance. One of the aircraft was a Bombardier Global 5000 that underwent a 250-hour inspection and countertop replacement. The second aircraft, a...
At the end of June, AMAC Aerospace Turkey, Istanbul, performed maintenance on a new customer’s Dassault Falcon F8X. The operator requested a troubleshooting for the weather radar system. In accordance with the aircraft manufacturer's recommendations, the weather radar...
AMAC Aerospace was happy to welcome a long term customer’s Boeing B737 to the hangars in Basel, Switzerland. The head of state aircraft underwent A1, B1, and B2 inspections. The maintenance was completed in mid-May, and the aircraft was redelivered on time and...
AMAC Aerospace was happy to welcome back a long term customers Airbus A320. During its stay at the hangars in Basel, Switzerland, the aircraft underwent an A1 and A2 check. During the checks, AMAC Aerospace’s technicians discovered corrosion on the wing’s trailing...
AMAC Aerospace Switzerland is pleased to have redelivered an Airbus A319 to a long term customer. AMAC Aerospace’s Airbus team performed an A1, A2, and A3 check of the aircraft. The maintenance was completed by the end of May, and the aircraft was redelivered on time...
AMAC Aerospace welcomed a Boeing B787 to the hangars in Basel, Switzerland. The privately owned aircraft underwent a 12-, 24-, and 36-month inspection. At the end of May, the maintenance was completed and the aircraft redelivered. The long term customer was very happy...
A long term customer contacted AMAC Aerospace Turkey, Istanbul, for out of phase tasks on their Dassault Falcon F7X aircraft. The aircraft was received with a fuel system failure so AMAC Aerospace Turkey’s team performed a troubleshooting. They replaced the center...
End of May, AMAC Aerospace Turkey Istanbul opened its hangar doors for a new customer of a Dassault Falcon F7X. The aircraft underwent an oxygen system upgrade and received a new type of oxygen box and masks for the crew. During its stay at AMAC Aerospace Turkey,...
AMAC Aerospace is proud to have redelivered an Airbus A320 to a long term customer. The head of state aircraft came to AMAC Aerospace in Basel, Switzerland, for a 6-month inspection and fuselage repair. In parallel, AMAC Aerospace team installed new 4K monitors. The...
AMAC Aerospace is pleased to have completed maintenance on a Boeing B747-400 at the hangars in Basel, Switzerland. The aircraft underwent a 6A inspection and received some minor cabin modifications- After two months of downtown, the aircraft was redelivered on budget,...
At the end of May, JCB Aero redelivered an Airbus A320 to a long term customer of the AMAC Aerospace Group. The aircraft arrived at the hangar in Auch, France, for a 6-month inspection and out of phase tasks. The customer was pleased with the support received from JCB...
AMAC Aerospace Turkey, Istanbul, were happy to welcome back a long term customers Dassault Falcon F2000. This time, the aircraft underwent a C check. It was the aircraft’s fifth C check during its lifetime, yet very few findings were identified. The maintenance was...
JCB Aero is pleased to have completed maintenance on a new customer’s Airbus A319. The skilled JCB Aero team conducted a 12-, 24-, and 36-month inspection of the aircraft. Additionally, vanish repairs were performed on the wardrobe doors at AMAC Aerospace Switzerland.
AMAC Aerospace is pleased to have completed maintenance on 2x Boeing B737 aircraft at the hangars in Basel, Switzerland. The first Boeing B737, owned by a long term customer, underwent an A, B1, and B2 check. On the second aircraft, AMAC Aerospace’s team performed a...
In mid-April, JCB Aero redelivered an Airbus A318 to a long term customer of AMAC Aerospace Group of Companies. The aircraft underwent a 6-, 12-, and 14-month check. It also required an NDT inspection. An NDT technician from AMAC Aerospace Basel went to perform the...
At the beginning of April, AMAC Aerospace was pleased to have redelivered 3x Gulfstream IV’s back to their owners. The first Gulfstream IV was a privately owned aircraft that underwent a 2C base maintenance inspection. The second aircraft, owned by a long term...
In mid-May, AMAC Aerospace Turkey, Istanbul, redelivered a Dassault Falcon F2000EX EASy to a long term customer. The aircraft underwent several out-of-phase tasks, as well as engine minor inspections. Some findings were discovered which AMAC Aerospace discussed with...
In mid-April, AMAC Aerospace Turkey, Istanbul, welcomed a Dassault Falcon F2000 for a 12-month inspection. During the check, several cabin defects were discovered and rectified. Some of the cabin lights did not illuminate, therefore AMAC Aerospace Turkey replaced the...
JCB Aero is pleased to have redelivered an Airbus A319 after maintenance at the hangar in Auch, France. JCB Aero’s skilled technicians performed 1A, 6A, 12A, and 24A checks on the aircraft. In addition, out of phase tasks were performed and the tires changed on the...
AMAC Aerospace Turkey is pleased to have redelivered a Dassault Falcon F6X to a long term customer after maintenance at the hangar in Istanbul. The aircraft was facing an intermittent failure from time to time. Therefore, AMAC Aerospace Turkey’s technicians performed...
A long term customer brought his Bombardier Global 6000 to AMAC Aerospace’s hangars in Basel, Switzerland. The aircraft underwent a 120-month inspection. During the check, AMAC Aerospace’s team found corrosion which they rectified. In addition, the privately owned...
AMAC Aerospace is proud to announce that it has successfully completed a repair of stringer cracks on a Boeing B747-8i. A total of 53 cracks were discovered in the stringers during a maintenance check by AMAC Aerospace’s technicians. Thanks to AMAC Aerospace’s...
In April 2025, AMAC Aerospace had the pleasure of hosting five Boeing B747’s simultaneously at its headquarter in Basel, Switzerland. This unique opportunity highlights the strength of AMAC Aerospace’s infrastructure and operational planning. The maintenance inputs...
AMAC Aerospace is widely recognized for its outstanding work on narrow- and wide-body aircraft. However, AMAC is also a strong and capable partner for mid-size aircraft, including Bombardier with a dedicated hangar at is facilities. For mid-size aircraft, AMAC...
AMAC Aerospace Turkey, Istanbul, has had a strong start to the year and has made significant achievements over the past 12-months. The facility, that provides MRO services on Pilatus and Dassault products, has performed several annual inspections on almost all types...
AMAC Aerospace Switzerland’s is proud to announce that its newly upgraded design studio is now fully operational, with an expanded team and increased space. AMAC Aerospace’s design capability lies in seamlessly transforming ideas into high-quality, actionable...
AMAC Aerospace continues to experience strong demand for maintenance inputs for a variety of aircraft models. Over the past 12 months, AMAC Aerospace Switzerland has completed maintenance work on more than 50x wide-body aircraft, more than 120x narrow-body aircraft,...
AMAC Aerospace is proud to announce that the construction of the expansion of the engineering building at its facility in Basel, Switzerland, which began in September 2024, has been completed. The new infrastructure includes a modern, three-story building in which the...
The transaction market in the private aviation sector is showing a clear revival. Forecasts predict market growth of around 30% in 2025. AMAC Aerospace is pleased to support this upswing with a broad range of services, solid technical expertise, and high flexibility...
AMAC Aerospace is proud to announce that over the past six months, the company has successfully completed numerous tailored SATCOM installations, supporting both traditional and next-generation systems, including Low Earth Orbit (LEO) constellations. With over 50x...
AMAC Aerospace is proud to announce the acquisition of KREATIVE ENGINEERING SERVICES (KES), located in L’Isle-Jourdain, in the south of France, on 16 May 2025. KES is a well-established, innovative, and highly experienced engineering firm specializing in the design...
At the beginning of April, AMAC Aerospace Turkey conducted line maintenance on a Dassault Falcon F2000EX EASy at the hangar in Istanbul. The aircraft underwent a 2-month inspection including a check of the oil level starter. Furthermore, the two main landing gear...
In mid-April, AMAC Aerospace welcomed a Boeing B737 to the hangars in Basel, Switzerland. AMAC Aerospace’s experienced technicians performed an A1 and A2 check on the aircraft. During its stay, the Boeing B737 also underwent overhaul of the nose wheel and the cockpit...
AMAC Aerospace’s Gulfstream team have conducted maintenance inspections on a Gulfstream G650. The aircraft underwent an 1A, 1C and 5C check at the hangars in Basel, Switzerland. The long term customer was very pleased with the work performed by AMAC Aerospace and the...
At the end of March, AMAC Aerospace Turkey redelivered 2x Dassault Falcon F2000EX EASy aircraft after routine line maintenance at the hangar in Istanbul. The first aircraft underwent a 2-month inspection. During the check, AMAC Aerospace Turkey’s Istanbul team...
AMAC Aerospace is pleased to have completed maintenance on a Bombardier Global 5000. The privately owned aircraft underwent a 1000-hour inspection at the hangars in Basel, Switzerland. The maintenance was completed at the end of March and the Bombardier Global 5000...
AMAC Aerospace Turkey, Istanbul, is pleased to successfully have completed a comprehensive 2C inspection on a Dassault Falcon F900EX EASy. During the check, AMAC Aerospace Turkey’s Istanbul team found corrosion and several structural findings on the aircraft, which...
AMAC Aerospace is proud to have worked five Boeing B747’s simultaneously at the headquarter in Basel, Switzerland. This landmark achievement demonstrates the operational capacity AMAC Aerospace Switzerland have for wide-body aircraft maintenance, completion and...
At the end of February, AMAC Aerospace redelivered 3x Gulfstream aircraft after maintenance at the hangars in Basel, Switzerland. The first aircraft was a Gulfstream G550 of a private owner from the Middle East region, which came for a multiple C check package. The...
AMAC Aerospace is pleased to have performed maintenance on a McDonnell Douglas MD-87. The Head of State aircraft underwent an A1 and A2 check at the hangars in Basel, Switzerland. In addition, the aircraft’s AFT bulkhead was repaired and a windshield was replaced. The...
A Dassault Falcon F2000 of a private customer arrived at AMAC Aerospace Turkey’s hangar in Istanbul when its auxiliary power unit (APU) was on the hold item list. The operator decided to position the aircraft at AMAC Aerospace Turkey as it is an authorized service...
At the end of March, JCB Aero redelivered an Airbus A319 to a long term customer of the AMAC Aerospace Group of Companies. The aircraft arrived at JCB Aero in Auch, France for an A1, A2 and A4 check. During its stay, JCB Aero’s team also replaced the Airbus A319’s fan...
AMAC Aerospace is pleased to have completed maintenance on a Boeing B373 of a first time customer. The aircraft arrived at AMAC Aerospace’s hangars in Basel, Switzerland, where it underwent A, B, C1 and C2 checks. During the checks, AMAC Aerospace’s team found...
At the end of February, AMAC Aerospace Turkey, Istanbul, completed routine maintenance on 2x Dassault Falcon aircraft. The first aircraft was a Dassault Falcon F2000EX EASy which underwent a basic inspection along with several scheduled servicing and operational...
At the end of January, AMAC Aerospace redelivered 2x Gulfstream aircraft after maintenance at the hangars in Basel, Switzerland. One of the aircrafts, a Gulfstream G550 of a new customer, underwent due maintenance and the aircraft was polished with Xzilon. In...
A long term customer contacted AMAC Aerospace Turkey because their Dassault Falcon F7X was experiencing occasional electrical ground failures. The privately owned aircraft arrived at AMAC Aerospace Turkey’s hangar in Istanbul where the team troubleshot the aircraft....
An Airbus A340 arrived at AMAC Aerospace’s hangars in Basel, Switzerland for maintenance. AMAC Aerospace’s experienced technicians conducted a KA-band installation with an A-check on the aircraft. In addition, some minor cabin repairs were performed. The customer was...
A regular customer brought his Airbus A318 to AMAC Aerospace’s hangars in Basel, Switzerland. AMAC Aerospace’s Airbus team conducted an intensive troubleshooting and rectification of the aircraft's Satcom system. The rectification was completed in early January and...
A long term, private customer brought his Dassault Falcon F2000 to AMAC Aerospace Turkey’s hangar in Istanbul. The aircraft underwent a 200-600 hour routine engine inspections as well as checks of the flap screw jacks and functional tests of the telescopic ducts on...
A new customer contacted AMAC Aerospace in need of AOG support for their Bombardier Global 5000. AMAC Aerospace responded immediately and welcomed the aircraft to the facility in Basel, Switzerland, where the AOG support was successfully completed. The private owner...
In mid-February, AMAC Aerospace Turkey’s team in Istanbul performed several maintenance tasks on a Dassault Falcon F7X. The aircraft underwent a routine servicing inspection and scheduled work on the flap actuators. The EPS (Emergency Power supply) batteries were also...
The last video of our Annual Report Video Series features Rolf Heinzelmann, Senior Manager Mid Size Aircraft Maintenance and Support Shops, who highlights the company’s global recruitment efforts, partnerships with aviation schools, and in-house training programs....
AerData closure: Migrate from Stream to ROAM for a Smarter Future. As AerData’s Stream approaches its closure, we strongly encourage AerData customers to transition to ROAM, the next-generation digital records management platform. ROAM is designed to offer superior...
AMAC Aerospace Turkey is pleased to have successfully completed maintenance on a Boeing B737. The commercial aircraft came to AMAC Aerospace Turkey’s hangars in Bodrum where AMAC Aerospace Turkey’s experienced team performed a C check on the Boeing B737. At the...
JCB Aero is pleased to have redelivered an Airbus A319 after maintenance at the hangar in Auch, France. JCB Aero’s skilled technicians performed a 6-month inspection on the aircraft. In addition, the aircraft underwent a nose landing gear and cockpit light...
At the end of 2024, AMAC Aerospace redelivered 2x Bombardier aircraft to two regular customers after maintenance at the hangars in Basel, Switzerland. The first aircraft was a Bombardier Challenger 3500 of a private owner that came for a small maintenance package. The...
A long term customer brought his Dassault Falcon F900EX EASy to AMAC Aerospace Turkey, Istanbul. It first arrived for a 24-month inspection. In parallel, AMAC Aerospace’s skilled Dassault Falcon team performed a weight check and carbon seal health check as well as an...
The sixth video features our Director of Environment, Occupational Health & Safety, Security, and Facility, Philippe Schurrer, who discusses the expansion plans for Basel and the group, with a focus on safety, engineering, and sustainability. He highlights the...
In late December, AMAC Aerospace completed maintenance on a Gulfstream G450. The aircraft underwent a 16-year inspection and nose cowl repair at the hangars in Basel, Switzerland. During its stay, AMAC Aerospace’s team also installed Starlink on the aircraft. The...
At the end of January, AMAC Aerospace Turkey, Istanbul, completed maintenance on 2x Dassault Falcon F2000. Both of the aircraft came for 200-400 hour routine engine inspections. In addition, one of the aircraft underwent a main oxygen cylinder replacement as per the...
AMAC Aerospace is pleased to have redelivered an Airbus A330 to a long term customer. The aircraft came to AMAC Aerospace’s hangars in Basel, Switzerland for a 48-month inspection. AMAC Aerospace’s experienced Airbus team found corrosion on the T-CAS antenna which was...
AMAC Aerospace welcomed a Gulfstream GV to the hangars in Basel, Switzerland, for a drop-in project. The aircraft had an air intake engine defect which was repaired by AMAC Aerospace's Gulfstream team. The regular customer was pleased with the maintenance and the...
At the beginning of December, AMAC Aerospace redelivered 2x Bombardier Global Express XRS aircraft which arrived at AMAC Aerospace in Basel, Switzerland for drop-in projects. One of the aircraft came for defect rectification and the second for wheel replacement. Both...
AMAC Aerospace Turkey, Bodrum, is pleased to have redelivered 3x Boeing B737-800 aircraft to a long term, commercial customer. All of the three aircraft AMAC Aerospace Turkey for C checks. Due to the professional interaction with the customer, the projects were...
AMAC Aerospace has completed maintenance of a Bombardier Global 7500. The aircraft arrived at AMAC Aerospace’s facilities in Basel, Switzerland in mid-October as a drop-in project. During its stay, AMAC Aerospace’s Bombardier team installed an NTF (non-textile floor)...
A Boeing B737 of a customer from the Far East arrived at AMAC Aerospace in Basel, Switzerland for a maintenance input. AMAC Aerospace’s Boeing team conducted an A1, A2, A3, A4 and C1 check on the aircraft. The team made some findings with a lot of challenges but...
The fifth video of our seven-part Annual Report Video Series 2024 features our Head of Engineering & Certification & CVE, Mr. Roger Sandmann, who discusses how the engineering department operated in 2024 and provides insights into completed and ongoing...
AMAC Aerospace Turkey, Istanbul, were contacted by a long term customer when their Dassault Falcon F2000EX EASy faced a brake system failure on a trip to the Maldives. AMAC Aerospace Turkey’s goTEAM immediately flew to Male Velana International Airport to provide AOG...
One of AMAC Aerospace’s long term customers brought his Airbus A320 to AMAC Aerospace in Basel, Switzerland, where AMAC Aerospace’s skilled technicians performed a B-check. In parallel, the landing gear was overhauled and power hold up units were installed. In...
In mid-November, AMAC Aerospace Turkey welcomed a Boeing B737-800. The commercial aircraft underwent a C check at the hangar in Bodrum, Turkey. Just a couple of weeks later, the project was completed within the given turnaround time without any delays and the aircraft...
At the end of December, AMAC Aerospace Turkey redelivered a Dassault Falcon F2000EX EASy to a long term customer. The aircraft arrived at AMAC Aerospace Turkey’s hangar in Istanbul for a base maintenance including 12-month, 24-month, 1B and engine minor inspection....
AMAC Aerospace was pleased to welcome a Gulfstream G4 to the hangars in Basel, Switzerland for a Pre-Purchase Inspection. During its stay it also underwent due maintenance. A new owner was found for the aircraft and before being release, a registration change was...
AMAC Aerospace is proud to have redelivered a Gulfstream GIV to an African customer after the aircraft had been on ground for 2 years. The aircraft arrived at AMAC Aerospace’s hangars in Basel, Switzerland, for an extremely heavy maintenance package due to corrosion...
A long term customer contacted AMAC Aerospace in need of AOG support for their Boeing B747. AMAC Aerospace’s skilled technicians performed a borescope inspection on the Head of State aircraft and the repair was completed over the weekend in order to get the aircraft...
The fourth video of our seven-part Annual Report Video Series 2024 features our Director of Group Sales, Mr. Eric Hoegen, who discusses the completion market, various sales activities at AMAC, and the business aviation industry over the next few years, among other key...
In mid-November, AMAC Aerospace Turkey welcomed 2x Dassault Falcon 7X to the hangar in Istanbul, Turkey, for out of phase tasks. The first aircraft underwent a fuel treatment and scheduled fuel system tasks as per routine inspection requirements. On the second...
During mid-November, AMAC Aerospace Turkey, Istanbul, completed several line maintenance activities on Dassault Falcon 2000 and 2000EX EASy aircraft. On a classic Falcon 2000 aircraft of a long term customer, a failure of the IRS (Inertial Reference System) warning...
In mid-November, AMAC Aerospace Turkey completed 3x Dassault Falcon 900EX EASy projects after maintenance at the hangar in Istanbul, Turkey. The first aircraft, of a long term customer, came for a 12-month inspection. The aircraft was released within the proposed...
AMAC Aerospace is pleased to have redelivered an Airbus A340 after maintenance at the hangars in Basel, Switzerland. The Head of State aircraft underwent an A-check and also had a KA-Band installed. The maintenance input was completed in mid-October and the aircraft...
AMAC Aerospace Turkey’s team in Istanbul continues to support its customers with line maintenance at various locations. In mid-November, they supported a long term customer based in Ankara with their Dassault Falcon 7X. In the beginning of November, AMAC Aerospace...
The third video of our seven-part Annual Report Video Series 2024 features our Chief Operating Officer, Mr. Tarek Muhiddin, who discusses opportunities in the market, customer requests and main innovations in aviation business among other key topics. To watch the...
In our second installment of our seven-part Annual Report Video Series 2024 AMAC Aerospace’s Group Chief Financial Officer, Mauro Grossi, offers a deep dive into emerging opportunities in international markets, addresses the recruitment challenges facing the aviation...
We are pleased to present you an overview of some of the latest achievements at our Group of Companies over the past twelve months. This is a series of seven individual videos featuring engaging interviews with our management team. The videos provide insights into...
AMAC Aerospace are happy to report that we have entered into a firm relationship with Airbus ACJ for their Service Centre Network, for our Basel HQ, Switzerland. Our expertise in Maintenance related activities and our sought-after completion services are in world...
AMAC Aerospace Turkey, Istanbul, is pleased to have completed line maintenance and out-of-phase tasks on a Dassault Falcon 2000S. During its stay, the privately owned aircraft also received a FAST BOX 4G upgrade. AMAC Aerospace Turkey’s team installed a Data...
In mid-October, a long term customers Dassault Falcon 900EX EASy arrived at AMAC Aerospace Turkey’s facility in Istanbul for line maintenance. The aircraft was experiencing APU (Auxiliary Power Unit) shutdown problems. AMAC Aerospace Turkey’s team performed a very...
AMAC Aerospace was pleased to welcome back a Gulfstream G450 of a long term customer. The government owned aircraft arrived at the hangars in Basel, Switzerland for an annual inspection and avionics modification. In mid-September, the maintenance was completed on time...
In mid-August, AMAC Aerospace welcomed a new customer’s Boeing B737 for an annual check at the hangars in Basel, Switzerland. The Head of State aircraft also underwent an engine gearbox modification and a KA-band installation, which AMAC Aerospace’s experienced Boeing...
AMAC Aerospace is pleased to have completed a drop-in AOG support on a Bombardier Global 5000. AMAC Aerospace welcomed the aircraft at the hangars in Basel, Switzerland where the team found corrosion on the engines that needed to be repaired. At the end of September,...
GAMIT Ltd (an AMAC Aerospace Company), based in Stansted, UK has been awarded a long-term contract to digitize the technical records of Transavia France’s fleet using the aerospace industry leading software produced by GAMIT called ROAM (Records Online Asset...
AMAC Aerospace Turkey has redelivered a Dassault Falcon 2000S after maintenance at the hangar in Istanbul, Turkey. The privately owned aircraft arrived at AMAC Aerospace Turkey in mid-September for out-of-phase tasks. AMAC Aerospace Turkey’s Istanbul team conducted...
AMAC Aerospace welcomed a Gulfstream G550 to the hangars in Basel, Switzerland. The privately owned aircraft arrived for a due maintenance and in parallel also underwent paint rectification. The long term customer was satisfied with the work and the aircraft was...
A long term customer contacted AMAC Aerospace in need of AOG support on an Airbus A320. The privately owned aircraft arrived at AMAC Aerospace’s hangars in Basel, Switzerland where it underwent galley repairs. In mid-August the AOG was completed and the aircraft...
JCB Aero, an AMAC Aerospace Company, is proud to announce that we are now operating Maintenance, Repair and Overhaul (MRO) activities at the hangar in Auch, France, which will allow us to further expand our services and capabilities to our existing and potential new...
A new customer contacted AMAC Aerospace Turkey for a pre-purchase inspection of a Dassault Falcon 7X. The privately owned aircraft arrived at AMAC Aerospace Turkey's facility in Istanbul in mid-August. After one week, the level 1 pre-purchase inspection was completed.
AMAC Aerospace is pleased to have redelivered a Bombardier Global Express XRS to a new customer. The privately owned aircraft arrived at AMAC Aerospace in Basel, Switzerland for a 15-month inspection with minor maintenance. At the end of August, the maintenance was...
A Boeing B737 of a long term customer arrived at AMAC Aerospace in Basel, Switzerland for heavy maintenance and cabin interior refurbishment. AMAC Aerospace’s experienced team conducted a C3 check and landing gear overhaul on the Head of State aircraft. A fuselage...
AMAC Aerospace welcomed an Airbus A330 for a Pre-Purchase Inspection (PPI) at the hangars in Basel, Switzerland. In addition, AMAC Aerospace’s team conducted a 6A check on the aircraft and did some interior cosmetic work in the cabin. One of the divans was also...
AMAC Aerospace Turkey Istanbul continues to handle several routine line maintenance projects. In mid-August, 2x Dassault Falcon 7X were returned to their owners after a visit at AMAC Aerospace Turkey’s hangars in Istanbul. One of the Dassault Falcon 7X came to AMAC...
AMAC Aerospace is pleased to conduct several pre-purchase inspections at the hangars in Basel, Switzerland. At the end of August, a pre-purchase inspection was completed of a Bombardier Global 6000 and is now waiting for a potential new owner to take over. “We have a...
In mid-August, AMAC Aerospace redelivered a Boeing B737-700 BBJ1 to a private owner. The aircraft came to AMAC Aerospace’s hangars in Basel, Switzerland for a 6, 12, 24 and 48-month maintenance inspection. During it’s stay AMAC Aerospace also performed a major...
AMAC Aerospace Turkey welcomed a Dassault Falcon F900DX to the facility in Istanbul for routine line maintenance. AMAC Aerospace’s team conducted a basic inspection including a regular check of the main batteries and 2-months inspection. In addition, the wheels were...
A Bombardier Challenger 650 of a long term customer arrived at AMAC Aerospace in Basel, Switzerland for maintenance. AMAC Aerospace’s experienced Bombardier team conducted a 1200-hour and 2400-hour inspection on the aircraft. At the end of July, the maintenance was...
A Bombardier Challenger 604 arrived at AMAC Aerospace in Basel, Switzerland for a 48-month check. During the check, AMAC Aerospace’s team found heavy fuselage structural corrosion on the aircraft. AMAC Aerospace cooperated with Bombardier to coordinate the repairs and...
AMAC Aerospace Turkey, Istanbul facility is pleased to have redelivered a Dassault Falcon 7X after AOG support. The long term customer contacted AMAC Aerospace Turkey, Istanbul on short notice and needed support in Ankara, Turkey. Istanbul facility immediately sent a...
AMAC Aerospace Turkey, Istanbul continues the operation of supporting customers with line maintenance activities at Sabiha Gökçen Airport. The team take care of several Dassault Falcons, which are parked at Sabiha Gökçen Airport. AMAC Aerospace Turkey, Istanbul is...
At the beginning of July, a new customer contacted AMAC Aerospace’s team in Istanbul for a prompt out of base AOG support on a Dassault Falcon 7X in Bodrum, Turkey. The aircraft required an EPS (Emergency Power Supply) replacement and AMAC Aerospace Turkey, Istanbul...
AMAC Aerospace was happy to welcome a Gulfstream G550 to the hangars in Basel, Switzerland. The G550 arrived for annual maintenance and avionic modification. In addition, a divan in the cabin was refurbished. The Head of State aircraft was redelivered on time and on...
In early July, AMAC Aerospace Turkey, Istanbul redelivered a Dassault Falcon 2000 to a long-term customer. The privately-owned aircraft arrived at AMAC Aerospace’s hangars in Istanbul for routine base maintenance and a mid-life inspection of the landing gear. In...
A Bombardier Global Express arrived at AMAC Aerospace for a pre-purchase inspection (PPI). During its stay, AMAC Aerospace’s team also conducted cosmetic work on the cabin interior and replaced the AFT fuel tank. At the end of July, the aircraft was delivered to the...
The AMAC Aerospace Group of Companies is proud to announce to have successfully finalized, signed and received the agreement of a full completion package for a VIP A320neo, in Basel, CH. AMAC Aerospace will outfit the VIP cabin of the Airbus A320neo aircraft with the...
AMAC Aerospace’s Istanbul team completed an AOG support on a Dassault Falcon 7X. The long term customer contacted AMAC Aerospace Istanbul after the aircraft suffered a bird strike. AMAC Aerospace sent a team to Ankara and replaced the slat on the 7X. At the beginning...
A Gulfstream G550 arrived at AMAC Aerospace in Basel, Switzerland for a scheduled annual maintenance. AMAC Aerospace’s Gulfstream team conducted the maintenance and the G550 returned to service in early July. AMAC Aerospace is proud to continue to be the preferred MRO...
AMAC Aerospace has redelivered a long term customer’s Boeing B747-8 after maintenance at the hangars in Basel, Switzerland. AMAC Aerospace’s Boeing team conducted several checks on the aircraft, an A1, A3, B1, B2, B3, B4, C1 and C3 check. They also carried out a...
At the end of June, JCB Aero was contacted by a customer in the south of France to repair a wallpaper scratch on an Airbus A300. The aircraft had gained a scratch just prior to delivery, therefore JCB Aero quickly sent a team member to Toulouse to repair the damage....
AMAC Aerospace’s team in Istanbul has completed an AOG support on a Pilatus PC-24 in Riyadh, Saudi Arabia. The team conducted a fuel probe replacement and rectified some troubleshooting. After the troubleshooting, they replaced the PC-24's data processing computers....
In mid-June, an Airbus A319 was redelivered to a long term customer. The privately owned aircraft underwent a A1, A2, A3 and C3 check at AMAC Aerospace in Basel, Switzerland. In parallel, AMAC Aerospace’s team refurbished the cabin seats and replaced the bladder tank....
GAMIT Ltd (an AMAC Aerospace Company), based in Stansted, UK has been awarded a long-term contract to digitize the technical records of flag carrier Air Tahiti Nui’s fleet using the aerospace industry leading software produced by GAMIT called ROAM (Records Online...
In mid-June, AMAC Aerospace in Basel, Switzerland, was contacted for a short-notice AOG support for an Airbus A320 of a long term customer. It was very important for the owner not to be on ground for a long period of time. Therefore, AMAC Aerospace quickly assembled a...
In mid-June, a Boeing B737-9, BBJ3 of a long term customer was redelivered after having undergone a heavy maintenance C3 check at AMAC Aerospace in Basel, Switzerland. AMAC Aerospace’s experienced Boeing team performed a landing gear overhaul and floorboard...
AMAC Aerospace was happy to welcome a long term customer’s Airbus A318 to the hangars in Basel, Switzerland. The privately owned aircraft underwent heavy maintenance and an ACT inspection. In parallel, the technicians upgraded the IFE system with new monitors and...
At AMAC Aerospace Switzerland, an Airbus A319 arrived for a 12 years check. The Head of State aircraft had a lot of corrosion that needed to be repaired before it could be returned to its owner. This required large amounts of work and in order to reduce the customer's...
AMAC Aerospace redelivered an Airbus A330 to a long-term customer at the beginning of June. The Head of State aircraft underwent a 48-month check including wet areas. During the check AMAC Aerospace team found a lot of structural corrosion which they repaired. In...
In early May, an Airbus A340 was redelivered to its owner after undergoing heavy repairs at AMAC Aerospace’s hangars in Basel, Switzerland. The experienced Airbus team conducted structural repairs due to corrosion on the aircraft. In addition, the engine and landing...
Mid June, an Airbus A320 was redelivered to its owner after undergoing several modifications at AMAC Aerospace’s hangars in Basel, Switzerland. The Head of State aircraft was partially converted from private to commercial operation and underwent heavy maintenance. Our...
AMAC Aerospace’s team in Istanbul continues to handle several AOG supports and are assisting customers around the world. At the end of May, a Dassault Falcon 7X was returned to service after undergoing AOG support by the Istanbul team. Another project is a long term...
In mid-May, AMAC Aerospace accepted a drop-in of a Gulfstream aircraft. The new customer had been advised to use AMAC Aerospace for maintenance and arrived with his Gulfstream GV at AMAC Aerospace in Basel, Switzerland. The maintenance was completed on time and after...
AMAC Aerospace are delighted to report that our sister company JCB Aero will install a new COO in position. Mr. Frederic Dezauzier will be joining us as the Chief Operating Officer (COO) at JCB AERO in Auch, effective May 27, 2024. This appointment marks a significant...
AMAC Aerospace Turkey is proud to announce that it has successfully obtained approval for the state-of-the-art Dassault Falcon 6X, marking a significant milestone in the company's expansion and service capabilities. The first Falcon 6X worldwide is scheduled for...
AMAC Aerospace has signed a new contract for the full Refurbishment and Maintenance on a B747-8i that is operated by a head of state. The work entails a full refurbishment and some partial redesign of all zones and takes into account a refresh of the old design to the...
AMAC Aerospace Basel is experiencing a bustling period with over 30 aircraft undergoing maintenance or completion across our five hangars. Notably, two-thirds of these aircraft benefit from our one-stop-shop infrastructure, enabling simultaneous cabin or system...
AMAC Aerospace is nearing the completion of five A330 end-of-lease redeliveries, including comprehensive full-body C-Checks for a major western government. This project includes: Three aircraft painted in military colors. Two aircraft painted with the Canadian maple...
AMAC Aerospace, Istanbul, Turkey is delighted to announce the successful completion of a comprehensive C-Check on a Falcon 2000 Classic series aircraft. In addition to the standard maintenance, the Falcon 2000 Classic underwent a significant interior upgrade. The...
AMAC Aerospace is pleased to have installed a Ka-Band antenna on an Airbus A340. The Ka-Band system provides consistent and outstanding broadband internet speed, allowing passengers on board to use internet nearly as fast as on ground. With more than 45 installations...
AMAC Aerospace performed an annual maintenance inspection on a privately owned GIV in Basel, Switzerland. During its stay, the aircraft also underwent a wing fuel leak rectification and a landing gear inspection. The aircraft was released on time and on budget and...
AMAC Aerospace was happy to welcome a Gulfstream G450 from a South African customer. The aircraft arrived in Basel, Switzerland at the end of December for an annual maintenance inspection. In addition, AMAC Aerospace’s team replaced the aircraft’s thrust reverser. The...
AMAC Aerospace continues to handle several Gulfstream projects. One project is a long-term customer’s GIV, which is currently undergoing heavy repair. The aircraft’s full cabin has been removed and installation for refurbishing of the woodwork is taking place. In...
AMAC Aerospace are happy to welcome an Airbus A319neo of a long-term customer. The aircraft is currently undergoing a completion project in Basel, Switzerland. Special for this completion is that our team will install the latest generation broadband, the OneWeb...
At AMAC Aerospace in Basel, Switzerland, several wide-body aircraft are being served. Two ACJ340s are undergoing heavy base maintenance checks. The two wide body aircraft are placed in a specific way wingtip to wingtip in Hangar 2, one of three wide-body hangars in...
AMAC Aerospace has completed a maintenance project on a new customer’s Airbus A319. The aircraft arrived at AMAC Aerospace’s hangars in Basel, Switzerland, where it underwent a 144-month and 12-year maintenance inspection. At the end of November, the privately owned...
We, AMAC Aerospace, are proud to announce that Mukamalah Aviation Company, Saudi Arabia agreed to enter into a collaborative discussion with AMAC Aerospace bringing both companies together to offer the Saudi and wider Gulf region excellent aircraft maintenance...
AMAC Aerospace has redelivered an Airbus A330 to a long term customer. The aircraft arrived at AMAC Aerospace’s hangars in Basel, Switzerland, where AMAC Aerospace’s team conducted heavy maintenance on the Airbus A330 after having identified a high level of findings...
A Boeing B777 arrived in Basel, Switzerland for a heavy repair. AMAC`s Boeing team had to conduct comprehensive structural work on the wings, one of the biggest tasks made since the company has been operating. The Head of State aircraft was returned to service at the...
AMAC Aerospace has completed a pre-purchase inspection of a Boeing B737 at the hangars in Basel, Switzerland. The new customer contacted AMAC Aerospace when the aircraft was blocked in the UK and AMAC Aerospace arranged an offsite event to ferry the Boeing B373 to...
AMAC Aerospace is pleased to have redelivered a Boeing B737 to a long term customer. The aircraft was scheduled for a due maintenance package in Basel, Switzerland, but due to damages to the skin, AMAC Aerospace first conducted repairs in Saudi Arabia to allow a one...
At the end of June, AMAC Aerospace redelivered an Airbus A319 after a maintenance check. AMAC's Airbus technicians performed a 1C- and 2C check and a landing gear change on the privately-owned aircraft. On the AMAC Pilatus PC-12, the AMAC team performed an annual...
AMAC is proud to have successfully carried out the first replacement of a fan disc on a Bombardier Global XRS. At the beginning of July, AMAC Aerospace was able to take delivery of its first project from Rolls Royce as an authorized service center. A fan disk was...
What is more exciting than having a sneak-peak behind hangar doors at an airport? 40 pupils of the local Gulluk Primary school paid a visit to AMAC Aerospace Turkey in Bodrum. Mrs. Fatma Atabey Buldan, Contract Administrator/Document Controller, explained with...
Keeping a facility safe and being prepared for any kind of incidents is not an easy thing. The Bodrum team of AMAC Aerospace Turkey welcome the firefighting department to their Bodrum Facility. The Bodrum-Milas BJV Airport Deputy General Manager and Tarmac Manager...
In early June, AMAC Aerospace completed a ‘PPI’ (Pre-Purchase Inspection) on a Bombardier Global 6000. Furthermore, AMAC’s Bombardier team performed structural corrosion repairs and a registration change on the Global 6000. The new customer was pleased to take...
AMAC Aerospace were pleased to start the summer with a completed maintenance check on an Airbus A320. The A320, owned by a long-term customer, came to Switzerland for a C-Check including ‘OOP’ (Out-Of-Phase) tasks and ‘SB’s (Service Bulletins). The privately-owned...
AMAC Aerospace are proud to have re-delivered a Boeing B737 to a long-term customer of AMAC after an A-Check, due maintenance and ‘SB’s (Service Bulletins). The privately-owned aircraft was released in mid-June. On another Boeing B737, AMAC’s Boing Team was busy...
A new customer brought his Gulfstream GV to Basel, Switzerland for an annual due maintenance package. After successful maintenance the privately-owned aircraft was re-delivered in early June. A Gulfstream G650 kept AMAC’s Gulfstream team busy: the privately-owned...
The Gulfstream G550 of a long-term customer of AMAC arrived in Basel to undergo an annual due maintenance package. The AMAC Completion team simultaneously refurbished the cabin seats. The Head-of-State aircraft was released for operations at the beginning of June. On...
AMAC Aerospace Switzerland AG becomes a member of the global support network of engine manufacturer Rolls-Royce as a European authorized Service Centre (ASC). AMAC Aerospace are joining the global support network of engine manufacturer Rolls-Royce as a European...
AMAC Aerospace are proud to present an overview about the latest achievements at AMAC Aerospace Group of Companies in the last months and to highlight some upcoming projects. Follow the statements and market comments of AMAC’s upper management including Kadri...
A long-term customer brought his Boeing B737 to AMAC Aerospace in Basel Switzerland for a due maintenance check. AMAC’s Boeing team carried out a 1A Check including some defect rectifications on the privately-owned aircraft. The B737 went back to its operations at the...
AMAC Aerospace Basel, Switzerland are proud to have won a new customer early this year. At the beginning of March, AMAC Aerospace were able to re-deliver a Boeing B737 after a heavy maintenance input. The Boeing team performed an A1 and A2 Check, due maintenance and...
At the beginning of May AMAC Aerospace re-delivered two Airbus ACJ319 to their esteemed clients. In Basel, the first ACJ319 underwent an A-Check including ‘Out of Phase’ (OOP) tasks. In addition, AMAC’s skilled completion team performed several cabin interior work on...
Beginning of April, AMAC Aerospace were happy to have re-delivered two Gulfstream aircraft back to their esteem clients. On a Gulfstream G550, AMAC’s qualified team performed an annual maintenance check on the Head of State aircraft. The long-term client of AMAC...
AMAC Aerospace were happy to welcome back an Airbus A320neo of a long-term customer. AMAC accomplished a green completion on this Head of State aircraft. The A320neo arrived in Basel, Switzerland to undergo a 1A inspection including annual and due maintenance checks....
One of AMAC’s long-term customer brought his Boeing B747 to Basel, Switzerland where AMAC’s skilled technicians performed a C Check package. During the maintenance input, the In-Flight Entertainment (IFE) system was upgraded and the completion team was busy in...
Beginning of April, AMAC Aerospace released a Boeing B777 in Basel, Switzerland. AMAC’s Boeing Team performed multiple C Check packages and a due maintenance input on the Head of State aircraft. Furthermore, they carried out a structural corrosion repair and partial...
Once again, AMAC Aerospace demonstrated its ability to respond quickly to AOG support requests. A long-term customer had a problem with his Bombardier Global 7500 and called AMAC for support. AMAC Aerospace responded immediately and accepted the aircraft. The...
AMAC Aerospace are proud to have re-delivered three privately-owned Gulfstream aircraft by the end of March 2023. The first Gulfstream to leave AMAC facilities was a Gulfstream G550. AMAC’s maintenance team performed a 1C, 2C, 3C, 4C, 8C and 16C Check. The team also...
By mid April, AMAC Aerospace re-delivered a Boeing B737 after a maintenance input. AMAC’s skilled technicians from the Boeing Team accomplished an 1A and 2A base maintenance check on the privately-owned aircraft. The team carried out AD’s and SB’s lists and the...
A Gulfstream GIV was re-delivered back to AMAC’s long-term customer after an annual maintenance package. Besides the maintenance input, the APU and flight controls were repaired simultaneously. Before the departure of the Head of State aircraft, AMAC installed a new...
An Airbus ACJ319 arrived for a 12-years check in Basel, Switzerland. AMAC’s Airbus team had to perform structural repairs all over the privately-owned aircraft and the completion team was busy carrying out cabin interior upgrades and re-works. The ACJ319 was...
A Bombardier Global 6000 underwent an annual due maintenance package in Basel, Switzerland. AMAC Aerospace are very proud to announce that the work package was completed within a reduced ground time and the privately-owned aircraft could go back to service for AMAC’s...
A Gulfstream aircraft arrived in Basel, Switzerland for a 96-month check. AMAC technicians performed an annual inspection on the Gulfstream IV for general visual and system checks, such as hydraulics, electrical and avionics. The engines were due for a mid-life...
At the end of March, the Boeing team at AMAC Aerospace re-delivered a Boeing BBJ to a new customer after a successfully completed A1 and A2 Check. ‘Out of Phase’ (OOP) tasks and an engine change were undertaken in parallel with the latest maintenance input. After the...
A Gulfstream IV had arrived in Basel, Switzerland to undergo a 144-months inspection, which is a major aircraft structure inspection. For a general visual inspection of the beams and underbody AMAC’s team removed the entire cabin. The rear fuselage suffered severe...
In early February, the Airbus team at AMAC Aerospace redelivered an Airbus ACJ320 to a long-term customer after successfully completing a C Check. The work included more than 200 maintenance tasks and around 100 'out of phase' (OOP) inspections which were carried out,...
AMAC’s AOG support team was busy in March: A privately-owned Global 6000 arrived for an AOG support in Basel, Switzerland. AMAC’s technician were able to release the new customer’s Global 6000 to service within a few days. A Gulfstream G650 aircraft arrived in Basel,...
A new customer’s Pilatus PC-12 arrived in Basel, Switzerland in early March. AMAC’s Pilatus team performed a base maintenance inspection on the privately-owned aircraft and could release it after a very short downtime back to its customer. At the same time, a...
AMAC Aerospace’s experts completed the annual maintenance on the company’s own PC-24. The technicians were required to remove all cabin elements to gain access for the maintenance areas associated with the checks. Additional works included some minor repairs before...
In February, three maintenance projects on Airbus aircraft were successfully accomplished. A Head of State Airbus ACJ320 was re-delivered after a thorough 24-month inspection in Basel, Switzerland. AMAC are proud to serve this long-term customer. A privately-owned...
In February, not only AMAC’s Airbus Team were busy; AMAC’s Boeing experts re-delivered two aircraft after having serviced them successfully. A privately-owned Boeing B777 of a long-term customer underwent a C Check inspection in Basel, Switzerland. While on ground,...
AMAC Aerospace’s maintenance teams were busy at the beginning of the year. A privately-owned Gulfstream G550 underwent an annual maintenance inspection in Basel, Switzerland. The technicians performed additionally a structural repair on the aircraft of a long-term...
Early February, AMAC Aerospace’s Bombardier team re-delivered a privately-owned Global 7500 to a long-term customer. The business jet underwent in Basel, Switzerland, an annual inspection. The technicians completed the work on time and returned it as scheduled. The...
In mid-January, AMAC Aerospace received a request for an AOG support on a Boeing B777. The AOG Maintenance team responded immediately and guaranteed the requested support in Basel, Switzerland. Thanks to an extra shift throughout the weekend, the Head of State...
At the end of January, AMAC Aerospace re-delivered two Boeing B737 aircraft after successful maintenance inputs. A Boeing B737 came to Basel, Switzerland to undergo a B1, B2 check including ‘Out of Phase’ (OOP) tasks, ‘Service Bulletins’ (SBs) and Airworthiness...
AMAC Aerospace accomplished an AOG support on a Bombardier Challenger 604 in Basel, Switzerland. AMAC’s Bombardier team completed the work within less than 24 hours and returned the mid-size aircraft back to service immediately. A Bombardier Global 7500 of a new...
AMAC Aerospace are pleased to have returned two Airbus A319s back to service at the end of January. On the first Airbus A319, AMAC’s qualified technicians performed a C Check package, which included ‘Out of Phase’ (OOP) tasks and ‘Service Bulletins’ (SBs). During the...
At the end of January, AMAC Aerospace’s Airbus Team welcomed an Airbus A319 for a due maintenance check in Basel, Switzerland. The privately-owned aircraft underwent a 1A and 2A Check. In addition, the technicians performed ‘Service Bulletins’ (SB’s) and...
AMAC Aerospace started successfully into the year with the re-delivery of a Boeing B737. The Head of State aircraft of a long-term customer underwent maintenance services in Basel, Switzerland, with several C Check packages. While the Boeing Team was busy with...
In mid-January, AMAC’s Gulfstream Team welcomed a Gulfstream G450 in hangar 5, AMAC’s dedicated hangar for mid-size aircraft. The business aircraft of a long-standing customer underwent a due maintenance in Basel, Switzerland. After the A and C Checks were completed,...
In early January, AMAC Aerospace accomplished a heavy base maintenance check on a Boeing B737 in Basel, Switzerland. AMAC’s Boeing team thoroughly inspected the Head of State aircraft and carried out simultaneously ‘Out of Phase’ (OOP) tasks. The technicians had to...
AMAC's Gulfstream Team was busy in January with two Gulfstream aircraft that came to Basel, Switzerland for maintenance inputs. Both Gulfstream G550s required defect rectification and after a few days only, the technicians returned the two aircraft to service again.
At the end of December, AMAC Aerospace had completed several Bombardier projects on mid-size aircraft. A Bombardier Global 6000 was re-delivered after a 1500-hour check, due rectifications and a Satcom antenna replacement. The privately-owned aircraft left AMAC mid of...
A Head of State aircraft underwent a scheduled maintenance check including a 6A Check at AMAC Aerospace’s hangars in Basel, Switzerland. In addition, the Boeing Team performed an engine boroscope inspection and ‘Service Bulletins’ (SBs) on the B747. Mid December, AMAC...
At the end of November, an Airbus ACJ319 arrived for scheduled maintenance at the AMAC hangar in Basel, Switzerland. Upon arrival, AMAC’s Airbus team lifted the aircraft on jacks and performed a 24- and 36-months check on the Head of State aircraft. A corrosion...
AMAC Aerospace carried out a heavy structural repair on an Airbus A340 in Basel, Switzerland. The privately-owned aircraft had severe structural damage caused by ground support equipment. The aircraft had to be jacked up from nose to tail on 12 jacks inside their...
AMAC Aerospace has successfully passed the renewal of the recertification audit of the ISO 45’001 certification, without any finding. “This is the result of a day to day engagement by all AMAC employees in all relevant health and safety at work matters. We thank all...
AMAC Aerospace performed a ‘Pre-Purchase Inspection’ (PPI) and due maintenance on an Airbus ACJ319 at AMAC headquarters in Basel, Switzerland. After the re-registration, AMAC released the aircraft to its missions heading home to the Far East.
AMAC Aerospace are proud to have performed a due maintenance on a McDonnell Douglas MD-87. The Head of State aircraft underwent a 1A, 2A and 2C Check in Basel, Switzerland. In addition to the scheduled maintenance input, AMAC’s technicians performed a heavy structural...
AMAC Aerospace are proud to announce the successful re-delivery of an Airbus ACJ330 to a long-standing customer. AMAC’s Airbus team performed a 24-month check, including an engine skin change. Additionally, the carpet in the ACJ330 was replaced and the Ka-Band was...
AMAC Aerospace are proud to have accomplished two AOG supports on a Bombardier and a Gulfstream aircraft. A Global 5000 arrived in Basel, Switzerland, on short notice and was released within a few days after a successful AOG support. The privately-owned aircraft went...
Mid-November, AMAC Aerospace re-delivered two Boeing B747 back to their owners. The first Boeing B747 arrived for an A- and B-Check including ‘Service Bulletins’ (SBs) and ‘Airworthiness Directives’ (ADs). The Boeing Team repaired corrosions on structural parts and...
A Bombardier Global 6000 arrived in Basel for a 15-, 30-, 60-month check as well as ‘Out Of Phase’ (OOP) tasks. In addition, various Service Bulletins (SBs) such as corrosion protection on the inner flap were performed. The completion team installed a new carpet and...
Once again, AMAC Aerospace showed their expertise in maintaining Bombardier aircraft. A privately-owned Bombardier Global Express arrived in Basel, Switzerland to undergo due rectifications. The aircraft had issues with a leak in the oxygen system and asked AMAC to...
AMAC’s Gulfstream team successfully accomplished due maintenance tasks on a Gulfstream G550. Subsequently, the team repaired the nose cone and performed various cabin interior rectifications. The privately-owned aircraft was released as planned beginning of November.
At the end of October, AMAC Aerospace released an Airbus ACJ320neo. The Airbus team is familiar with the Head of State aircraft as the cabin interior had been outfitted by AMAC Aerospace in Basel, Switzerland. The Airbus ACJ320neo was successfully re-delivered to the...
At the end of October, an Airbus ACJ320 has been re-delivered after a completed 12-year check. During a 12-years check, the entire cabin has to be removed in order to be able to check every little detail precisely. After the completed check, the full cabin was...
AMAC Aerospace are proud to announce the re-delivery of a Boeing B747 after a scheduled maintenance input within a reduced ground time. The Head of State aircraft was released mid-October after a 12- and 24-month check. AMAC Aerospace released the aircraft after a...
A privately-owned Gulfstream was re-delivered by the end of September back to its owner. AMAC Aerospace performed a due maintenance package on the Gulfstream G550. The new customer was fully satisfied with AMAC’s work and AMAC are looking forward seeing the aircraft...
AMAC Aerospace are registering a high demand for its MRO expertise for Bombardier aircraft. A Bombardier Global 6000 arrived in mid-September in Basel, Switzerland. The aircraft of a long-standing customer had visited Basel before for several scheduled maintenance...
End of September, an AOG support request for a Gulfstream IV of a long-term customer reached AMAC Aerospace in Basel, Switzerland. AMAC reacted within a few hours and accepted the Head of State aircraft in Basel. The Gulfstream IV has been released within 24 hours,...
AMAC Aerospace are proud to have accomplished a 120-month inspection on a privately-owned Bombardier Global 6000. As part of the major maintenance inspection, the Bombardier team performed a landing gear overhaul and replaced the carpet of the interior cabin. In...
AMAC Aerospace re-delivered two Airbus aircraft in September. At the beginning of September, an Airbus A319 had landed in Basel, Switzerland, to undergo a 1A and 3A Check. AMAC’s technicians carried out various rectifications on the privately-owned aircraft. The...
At the beginning of September, AMAC Aerospace performed a Pre-Purchase Inspection (PPI) on a privately-owned Gulfstream G450. As requested by the customer, the project had to be completed within a shortened ground time. AMAC’s Gulfstream team are proud to have...
AMAC Aerospace re-delivered two Bombardier aircraft. Mid-August, a Bombardier Global 7500 arrived on short notice in Basel, Switzerland. AMAC’s Bombardier team carried out a tire change, some defect rectifications on the avionic systems and cabin items. The...
Mid-August, AMAC Aerospace returned an Airbus ACJ340 after an extensive heavy base maintenance check. The Head of State aircraft underwent a 24- and 48-month check including a landing gear replacement. During the ground time, AMAC’s completion team did minor touch ups...
AMAC Aerospace are registering a high demand for its MRO expertise on Airbus aircraft. Mid-August AMAC re-delivered an Airbus ACJ319 to a customer in the Far East. The privately-owned aircraft underwent a scheduled A1 and A2 Check in Basel, Switzerland. Due to a...
Mid-August, AMAC Aerospace released a Boeing B737 after a comprehensive maintenance input. AMAC’s Boeing team performed a C Check including ‘Service Bulletins’ (SBs) and ‘Airworthiness Directives’ (ADs). During the maintenance, AMAC’s completion team replaced the...
Early August, a Gulfstream GIV left AMAC’s Hangar Nr. 5, dedicated to mid-size aircraft. The Gulfstream Team had carried out a 16A and a 20C Check. During ground time, the AMAC team carried out some due rectifications and released the aircraft on time back to its...
Beginning of August, AMAC Aerospace received an AOG request for a Gulfstream G550. AMAC’s Gulfstream team changed the ice detector and repaired a cabin window blind. Additionally, the technicians run updates on the navigation database of the privately-owned aircraft....
AMAC Aerospace completed an intermediate due maintenance including defect rectifications on a McDonnell Douglas MD-87. The privately-owned aircraft has been re-delivered to the customer on time mid-July. On the same day, AMAC Aerospace re-delivered a Gulfstream G550....
AMAC Aerospace are happy to announce the re-delivery of an Airbus A320. AMAC’s Airbus technician performed a 6-month check and upgrades on the Head of State aircraft in Basel, Switzerland. Due to the tight summer schedule of the owner, AMAC’s team worked in shifts to...
Mid-July, AMAC Aerospace’s AOG support team received a request for an AOG support on a Boeing B737. The team responded immediately and guaranteed the new customer an AOG support in Basel, Switzerland. The B737 was re-delivered within a couple of days. The parts have...
AMAC Aerospace’s Bombardier Team are proud to have accomplished two Pre-Purchase Inspection (PPI) projects in Basel, Switzerland. After a successful ‘PPI’, a privately-owned Bombardier Challenger 300 was re-delivered to the new customer. AMAC’s Bombardier Team is...
A privately-owned Boeing B737 came to AMAC Aerospace in Basel, Switzerland to undergo a Pre-Purchase Inspection (‘PPI’). A 144-month check, Service Bulletins (SBs) and Airworthiness Directives (ADs) were included in the project and after the successful maintenance...
AMAC’s Airbus Team welcomed an Airbus A321 for a multiple C Check in Basel, Switzerland. Furthermore, a landing gear overhaul was performed on the Head of State aircraft. A new maintenance project by the customer has already been validated. The next aircraft will come...
End of June, AMAC’s hangar 5, dedicated to mid-size aircraft, opened its doors to welcome a Bombardier Global 6000. The South American machine stops by at AMAC Aerospace in Basel, Switzerland, every time the owner is en route in Europe. AMAC Aerospace carried out a...
AMAC Aerospace are proud to announce a successful completed maintenance project on a Boeing BBJ aircraft. The BBJ arrived in Basel, Switzerland to change its registration number. AMAC’s Boeing Team installed a Ka-Band antenna and upgraded the cockpit system by...
Mid-June, AMAC Aerospace re-delivered an Airbus A330-200 after a comprehensive maintenance input. The Head of State aircraft came to Basel, Switzerland for a 72-month check. During ground time, AMAC’s Airbus Team carried out a landing gear overhaul: the landing gear...
End of June, AMAC Aerospace released two Airbus ACJ319. The first Airbus ACJ319 underwent a scheduled due maintenance and the installation of Service Bulletins (SBs). The ACJ319 has been re-delivered on time and went straight back. On the second ACJ319, AMAC’s Airbus...
AMAC Aerospace were happy to re-deliver an Airbus A320, after a 36-month inspection in Basel, Switzerland to a long-term customer. The Head of State aircraft underwent partial cabin refurbishment. Mid-May, a Bombardier Challenger 604 had arrived for an annual...
End of May, AMAC Aerospace re-delivered two Boeing aircraft after successful maintenance. On a Boeing B747, AMAC Aerospace’s Team performed a 1A, 2A and 6A Check. Furthermore, the Engineering team finalized Service Bulletins (SBs) and AMAC’s technicians carried out...
AMAC Aerospace were proud to have re-delivered a Boeing B747 after a heavy-base maintenance input and substantial refurbishment work. The Head of State aircraft came to Basel for a Ka-Band installation. In parallel, AMAC’s experts installed a Self-Defense System (SDS)...
In the first opening months of the year, AMAC won several maintenance projects on Bombardier aircraft. By the end of April, AMAC Aerospace re-delivered a Bombardier Global XRS to an existing client. AMAC’s Bombardier team carried out a 15- and 30-month check and...
AMAC’s Gulfstream Team carried out an annual base maintenance package on a Gulfstream G550 including ‘Computerized Maintenance Program’ (CMP). CMP is a system, which has been developed by Gulfstream for maintenance tasks on the whole Gulfstream fleet. Each individual...
AMAC Aerospace completed a major maintenance project on a Boeing BBJ aircraft in Basel, Switzerland. The privately-owned BBJ underwent a 144-month check which included ‘Out Of Phase‘ (OOP) tasks, 'Service Bulletins (SB’s) and 'Airworthiness Directives' (AD’s). AMAC’s...
AMAC Aerospace are proud to have re-delivered an Airbus ACJ318 to an existing customer. AMAC’s Airbus team performed a due maintenance and some external paint rectifications. In accordance to the customer request, AMAC carried out further modifications and minor...
A long-term customer sent his Boeing BBJ737 for a maintenance check to Basel, Switzerland. AMAC’s Boeing Team performed a B4-check as well as ‘Service Bulletins’ (SB’s) and ‘Airworthiness Directives’ (AD’s). Early April, the privately-owned aircraft was re-delivered...
AMAC Aerospace is registering a constant demand for maintenance services on Mid-Size Aircraft. Mid-April, AMAC Aerospace finalized two maintenance projects on Bombardier aircraft in Basel, Switzerland. The first was a privately-owned Bombardier Challenger 650 was...
At the beginning of April, AMAC Aerospace re-delivered a Gulfstream G450 to a new customer. The privately-owned G450 underwent a ‘PPI’ (Pre-Purchase Inspection) and was re-delivered within a very short ground time. Mid-March, AMAC received a request on short notice...
Mid-April, AMAC Aerospace granted AOG support on a Bombardier Challenger 605. The privately-owned aircraft of a long-term customer was released after a short ground time back on its missions. On an Airbus A318, AMAC’s technicians carried out an annual base maintenance...
AMAC Aerospace welcomed a Boeing B787, which was due for a B3-, B4-, B6-check and a 6-month check. Meanwhile, the Completion Team carried out several cabin refurbishments to seats, deco panels and VIP lavatory. In order to provide an excellent entertainment program on...
AMAC Aerospace are proud to have completed maintenance projects on two Airbus ACJ319s in Basel, Switzerland. In early April, an ACJ319 was re-delivered to a long-term customer after an AOG support. AMAC’s Airbus team repaired a water leak and the privately-owned...
AMAC Aerospace were happy to welcome a new customer at their facilities in Basel, Switzerland; the hangar was prepared for a due maintenance input on the McDonnell Douglas MD87. AMAC’s narrow body team carried out a 6-month check on the privately-owned aircraft. The...
AMAC Aerospace finalized a maintenance project on an Airbus ACJ319 in Basel, Switzerland. The privately-owned Airbus underwent a maintenance check which included a scheduled A-Check and ‘OOP’ (Out of Phase) inspections. Furthermore, AMAC’s Airbus Team performed...
At the end of March, AMAC Aerospace completed three Bombardier projects in Basel, Switzerland. AMAC Aerospace performed on a Global 5500 a ‘short notice intervention’ in Basel. The privately-owned aircraft was re-delivered to the new client within a short ground time....
Already one year has passed by since AMAC Aerospace is operating its Hangar Nr. 5 in Basel, Switzerland. Since then, a total of 273 Bombardier, Gulfstream and Pilatus aircraft projects have been maintained in this dedicated hangar. Happy Anniversary Hangar Nr. 5!...
AMAC Aerospace are happy to announce the re-delivery of an Airbus ACJ330 from a new customer in March 2022. The privately-owned aircraft underwent in Basel, Switzerland a 1A, 2A, 3A maintenance check. An Airbus ACJ319 of an existing customer was released mid of March...
At the beginning of March, AMAC Aerospace re-delivered an Airbus A340 after having completed a 12-month check including ‘OOP’ (Out of Phase) tasks. AMAC’s skilled technicians also carried out a landing gear overhaul on the Head-of-State aircraft. It is a complex task,...
Two aircraft have found new owners after Pre-Purchase Inspections (‘PPI’) at AMAC Aerospace in Basel, Switzerland. A McDonnell Douglas MD-80 arrived in February in Basel, to undergo a Pre-Purchase Inspection (‘PPI’). In addition, AMAC’s maintenance team performed a...
In early March, AMAC Aerospace released three aircraft after completing AOG supports. A Bombardier Global 6500 and a Global 6000 as well as a Gulfstream G650 returned to their missions within a short ground time. AMAC Aerospace has earned a reputation for its...
AMAC Aerospace has re-delivered a Gulfstream GIV after a base maintenance check. The privately-owned aircraft was a project from an African customer, who is willing to fly to Switzerland to get the high quality service from AMAC’s technicians in Basel he had...
AMAC’s Boeing Team in Basel, Switzerland carried out an A-Check, ‘Service Bulletins’ (SB’s) and ‘Airworthiness Directives’ (AD’s) on a Boeing BBJ. AMAC’s interior team performed several cabin interior rectifications; soft furnishing materials were repaired and wooden...
AMAC Aerospace has re-delivered a Bombardier Challenger 605 and a Boeing B777 after a maintenance input in Basel, Switzerland. In February, AMAC Aerospace re-delivered a Bombardier Challenger 605 after a 96-month inspection. The customer appreciated AMAC’s...
At the end of January, AMAC Aerospace welcomed a Bombardier Global 6000 in Basel, Switzerland. AMAC carried out a 15- and 30-month check on the aircraft of the long-term customer. The privately-owned aircraft was release within a reduced ground time due to a special...
AMAC Aerospace were selected for two maintenance projects on Boeing B737 aircraft in Basel, Switzerland. On the first aircraft, AMAC carried out an A- and B1-Check. The maintenance input was completed by the end of February and the privately-owned Boeing BBJ was...
AMAC Aerospace are proud to have completed a major base maintenance check on an Airbus A318. The privately-owned aircraft underwent an A1-, A2-, 1C-Check, Out of Phase (‘OOP’) tasks, and implemented ‘Service Bulletins’ (SB’s) and ‘Airworthiness Directives’ (AD’s). The...
AMAC Aerospace completed a Pre-Purchase Inspection (‘PPI’) on a Gulfstream G550. The purpose of a PPI is to provide valuable insights into the overall condition of the aircraft and into its logbooks. In conjunction with the ‘PPI’, AMAC’s technicians carried out a...
At the end of January, an Airbus A319 of an existing client was re-delivered after a scheduled input. The Airbus team performed a 6-month check, a windshield change and several ‘Service Bulletins’ (SB’s) and ‘Airworthiness Directives’ (AD’s) during the ground time....
Mid-January, AMAC Aerospace opened its hangar doors to welcome a Bombardier Global 7500. The client requested a routine check on the Global 7500. AMAC’s Bombardier team carried out an 850-hours check on the privately-owned aircraft and completed guarantee work on some...
At the beginning of January, AMAC Aerospace re-delivered a Boeing B737 to its customer. AMAC’s technician performed an A-Check on the privately-owned aircraft and installed new brakes. The incoming requests for a slot in AMAC’s hangar 5, dedicated to mid-size business...
AMAC Aerospace completed two maintenance projects on Airbus ACJ320 in Basel, Switzerland. On the first privately-owned aircraft, AMAC’s experts successfully performed a 3C-Check, which included a cabin interior enhancement. AMAC’s staff worked in shifts to meet the...
An Airbus ACJ319 arrived mid-January in Basel, Switzerland. Within less than 24 hours, AMAC’s Airbus team performed an engine change including parts procurement and released the privately-owned aircraft to the customer. The second Airbus ACJ319 was re-delivered...
AMAC Aerospace are well known for their flexibility to accommodate short notice requests from VIP operators. A long-term customer of AMAC Aerospace benefited from AMAC’s central location in Europe: The privately-owned Airbus A319 arrived on short notice in Basel,...
AMAC Aerospace re-delivered a Bombardier Challenger 650 after a maintenance input by the end of December. The privately-owned aircraft underwent due maintenance and defect rectifications. “Currently, we have a high capacity with base maintenance checks on Bombardier...
AMAC Aerospace in Basel, Switzerland has accomplished a base maintenance check on a Head of State wide-body Boeing aircraft. AMAC’s skilled Boeing team carried out engine boroscope inspections. With this technology, AMAC performs visual inspections with a video...
AMAC Aerospace are proud having the capability to maintain the new Bombardier Global 7500, the world’s largest and longest range mid-size jet. Mid-December, AMAC Aerospace welcomed a Bombardier Global 7500 in Basel, Switzerland. The privately-owned aircraft underwent...
AMAC Aerospace are proud to have completed a heavy base maintenance check on a Boeing B737 in Basel, Switzerland. The privately-owned aircraft underwent an A-, B- and C-Check. Included were ‘Service Bulletins’ (SB’s) and ‘Airworthiness Directives’ (AD’s) that were...
Mid-December, AMAC Aerospace re-delivered an Airbus A319 after a heavy base maintenance check. AMAC’s Airbus team conducted a 12-year check with ‘Service Bulletins’ (SB’s) and completed a landing gear overhaul. At the same time AMAC’s Airbus experts also carried out...
Mid-December, AMAC Aerospace opened the hangar doors of Hangar No. 5 to welcome a Bombardier Challenger 300. AMAC’s Bombardier Team carried out a base maintenance check with some cabin interior rectifications. The privately-owned aircraft has been re-delivered, after...
AMAC Aerospace Switzerland has acquired Gamit Ltd, a UK company supplying professional and technical support to local and international Maintenance Repair Organizations, airlines, private and corporate aircraft owners. Bernd Schramm, Chief Operating Officer AMAC...
Mid December, AMAC Aerospace completed a maintenance project on a Gulfstream G450. AMAC’s Gulfstream team carried out multiple A- and C- check packages, a major interior rectification and replaced all tires. The privately-owned G450 was released within a short period...
AMAC Aerospace are happy to announce the re-delivery of a Boeing B737 after a successfully completed Pre-Purchase Inspection (‘PPI’) in Basel, Switzerland. AMAC’s Boeing team also carried out structural repairs, an ‘IFE’ (In-Flight Entertainment) system repair and...
AMAC Aerospace responded to an AOG request at the end of November. The Gulfstream GIV arrived at short notice and AMAC Aerospace carried out an AOG support including an additional scheduled maintenance. To release the privately-owned aircraft in time, the Gulfstream...
AMAC Aerospace re-delivered a Boeing B737 on time and on budget after a 1C Check. During the ground-time, AMAC’s Boeing team had performed some cabin defect rectifications and updated the entertainment system on the privately-owned aircraft. By the end of November,...
A Bombardier Challenger 300 has been re-delivered at the beginning of December after a due maintenance. The Bombardier team performed a 600-hour check and several SB’s (‘Service Bulletins’). The aircraft was released on time and on budget. A second Bombardier...
AMAC Aerospace welcomed at the beginning of November a privately owned Bombardier Global 5000 in Basel, Switzerland to provide an assist to a requested AOG Support. AMAC’s Bombardier Team replaced a defective windshield within a very short ground time and released the...
AMAC Aerospace are happy to have re-delivered two Boeing B737 at the beginning of November. The first privately owned aircraft underwent an A, B3 Check and a window repair. The technicians installed a new software system before they released the aircraft back to its...
AMAC Aerospace – Group of Companies would like to share with you our annual Company Update 2021 Video: Video Archive | AMAC Aerospace We are happy to present you an overview about some of the latest achievements at our Group of Companies in the last months and to...
AMAC Aerospace are happy to announce the re-delivery of a Boeing B737 after a successful completed maintenance input. The privately-owned BBJ flew to Basel, Switzerland to undergo an annual check. During the ground-time, AMAC’s Boeing Team carried out several defects...
AMAC Aerospace welcomed a BBJ due for a Pre-Purchase Inspection (PPI). After the ‘PPI’ was successfully completed, AMAC performed minor modifications on the Boeing B737. The privately-owned aircraft underwent several modifications, including a ‘STC’ (Supplemental Type...
Mid-October AMAC Aerospace released a Boeing B747-8. The Head of State aircraft underwent several large modifications at AMAC’s headquarter in Basel, Switzerland. AMAC’s engineering team performed several STC-level modifications plus ‘IFE’ (In-Flight Entertainment)...
A privately-owned Boeing BBJ arrived at AMAC Aerospace’s headquarter by the end of summer. AMAC’s Boeing team completed a due maintenance on the Boeing B737. The BBJ was delivered on time to AMAC’s customer in the Far-East. AMAC Aerospace maintained the BBJ of a...
AMAC Aerospace are proud to announce a re-delivery of a Gulfstream G450 aircraft. The aircraft of the new client had to undergo a Pre-Purchase Inspection (‘PPI’). During the ‘PPI’ the customer decided to perform a heavy base maintenance check on the aircraft. AMAC...
Early October, AMAC Aerospace completed a heavy maintenance check on a Gulfstream G450. AMAC’s Gulfstream team carried out a 72-month inspection on the Head of State aircraft. The inspection included the exposure of the airframe to allow the technicians a...
Mid-September AMAC Aerospace opened its hangar doors to release a Boeing B737 after a heavy base maintenance check. The privately-owned aircraft underwent a 4C-Check in in Basel, Switzerland. During the ground time the Satcom system was upgraded and AMAC’s completion...
AMAC Aerospace is registering a high demand for its AOG support services. A Bombardier Challenger and a McDonald Douglas MD87 requested AOG support on short notice in September. Within 12 hours AMAC Aerospace designated two teams who travelled on site in Europe. In...
AMAC Aerospace are proud to announce the re-delivery of a Boeing B777 in Bodrum, Turkey. The Head of State owned aircraft underwent multiple C Check packages, ‘Out of Phase’ (‘OOP’) tasks and several ‘Service Bulletins’ (SB’s) were carried out. In parallel, AMAC’s...
End of August, AMAC Aerospace re-delivered a Boeing B737. AMAC’s Boeing team carried out a 2C-Check and due maintenance tasks. The technicians carried out ‘Service Bulletins’ (SB’s) and ‘Airworthiness Directives’ (AD’s) on the privately-owned aircraft in parallel to...
End of June, AMAC Aerospace opened its hangar doors to welcome a Boeing B747 in Basel, Switzerland. AMAC’s team carried out a 6-year check, including a 24- and 60-month-check and ‘Out of Phase’ (OOP) tasks. Besides the maintenance inputs the technicians carried out a...
AMAC Aerospace were happy to welcome back a long-standing customer; a bay at the hangar was prepared for the maintenance input of the Airbus ACJ319. AMAC’s Airbus team carried out the annual base maintenance and ‘Service Bulletin’s’ (SB’s) on the privately-owned...
End of August, AMAC Aerospace welcomed a Bombardier Global 6000. The privately-owned aircraft underwent defects rectifications and was released on its missions early September. AMAC’s Bombardier team performed a Pre-Purchase Inspection (‘PPI’) on a second Bombardier...
AMAC Aerospace are proud to announce a departure of a Bombardier Global 7500. The privately-owned aircraft arrived beginning of August in Basel, Switzerland. AMAC’s Bombardier team carried out a base maintenance check; this was the second Global 7500 serviced in Basel...
End of July, AMAC Aerospace received a request for an AOG-Support in Europe. AMAC Aerospace’s AOG experts organized without delay a team of technicians to solve the issues on the privately-owned Gulfstream G450. Within a short time, the aircraft was released and...
AMAC Aerospace has received a request for an AOG support in Europe. The privately-owned aircraft needed AOG support on short-notice and AMAC’s Bombardier supervisors sent a team within 24 hours to solve the issue to the customer’s fullest satisfaction.
By the end of June, AMAC Aerospace welcomed a Bombardier Global 6000 in Basel, Switzerland. AMAC’s Bombardier team is carrying out an annual base maintenance check on the privately-owned aircraft. “We register a growing demand for maintenance inputs on privately-owned...
By Mid-June, a Boeing B737-400 arrived in Basel, Switzerland, for a Pre-Purchase Inspection (PPI) by AMAC’s dedicated team. A PPI is an independent, professional third-party service that assesses the condition of the aircraft before a purchase offer is made. “We...
AMAC Aerospace Bodrum, Turkey, will welcome a Boeing B737-NG for several maintenance checks. Due to operational reasons the aircraft will be redirected to AMAC Bodrum, Turkey to undergo several maintenance checks. AMAC’s Boeing technicians will perform A, B1, B2...
Mid-June, AMAC’s Boeing team started to carry out A, B1 and due maintenance tasks on a long-term customer’s Boeing B737. The technicians will carry out Service Bulletins (SB’s), ‘Airworthiness Directives’ (AD’s) and ‘Out of Phase’ (OOP) tasks on the privately-owned...
AMAC Aerospace are proud to announce the first re-delivery of a Bombardier Global 7500. It was the first aircraft of this type which had a maintenance input in AMAC’s hangar 5, dedicated to mid-size business jets. AMAC’s Bombardier team performed tire changes on all...
AMAC Aerospace’s Airbus team is getting ready for the arrival of a privately-owned A318 early July. The aircraft of an existing client will undergo a heavy base maintenance check. AMAC’s technicians will perform this major check – which will require up to 10’000 men...
AMAC Aerospace are proud to have been awarded with a new maintenance project from a first-time customer. The Boeing B737-NG will arrive early July. AMAC’s Boeing team are going to perform a 1A, 2A, 6A Check and a due maintenance on the privately-owned aircraft. A...
AMAC Aerospace’s Bombardier supervisor team received a request on Friday noon for an AOG support on a Bombardier Global XRS in Europe; a side brace actuator was leaking. Without delay, AMAC sent a team to help their long-term customer and checked if the aircraft was...
AMAC Aerospace are pleased to re-deliver an Airbus ACJ319 to its principal. The privately-owned aircraft of a long-term customer arrived in March 2021 for a 72-month check and a major cabin refurbishment was also included in the ground-time of this project. The scope...
The new hangar at AMAC Aerospace has just been put into operation some weeks ago and is already seeing a constant stream of incoming new aircraft for maintenance tasks. Early June, AMAC’s Bombardier technicians welcomed a Bombardier Global 6000. The privately-owned...
AMAC Aerospace are proud to have signed a new maintenance contract with a long-term customer for a Boeing B737. The privately-owned aircraft will arrive end of June in Basel, Switzerland. AMAC’s skilled Boeing technicians will carry out a 12-year check on the BBJ...
A promising start into summer: AMAC Aerospace has signed three new contracts on Airbus aircraft A319. At the end of May, AMAC Aerospace welcomed a privately-owned Airbus ACJ319. The narrow-body aircraft will undergo a maintenance check, including 6- and 12-month...
AMAC Aerospace are proud to have signed a new maintenance contract on a Bombardier Global 6000. The privately-owned aircraft arrived end of May. The Bombardier Global 6000 will undergo a maintenance check, including 6- and 12-month checks. The second contract...
At the End of May, three AOG requests on short notice reached AMAC Aerospace in Basel, Switzerland. AMAC provided immediate support for the owners of a Bombardier Challenger 350, a Bombardier Global XRS as well as a Gulfstream IV. All privately-owned aircraft were...
AMAC Aerospace welcomed at the end of May a privately-owned Bombardier Global Express in Basel, Switzerland. The aircraft arrived on short notice for an annual inspection. Deliveries of the Bombardier Global Express began in 1999, and ended in 2006. The Global Express...
A privately-owned Bombardier Global Express arrived mid-May for due maintenance in Basel, Switzerland. The maintenance service will be carried out in AMAC’s new hangar No. 5, dedicated to mid-size aircraft. AMAC’s Bombardier team will perform a 500 hours inspection...
Business aviation relies heavily on efficient and reliable services, often at short notice. AMAC Aerospace provided immediate AOG support for the owner of a Boeing BBJ and sent within 24 hours a team to Nice, France, to solve the issues at hand. AMAC Aerospace is well...
Since mid-May, AMAC is hosting an Airbus A320 at its hangars in Basel, Switzerland. The privately-owned narrow-body aircraft arrived for a double engine change; during the ground time AMAC’s Airbus team will carry out a small maintenance package on the A320.
A Boeing B737 will enter AMAC’s facilities by the end of May for a maintenance check which includes 1A, 2A and 4A Checks. AMAC’s Boeing team will carry out ‘Out of Phase’ tasks (‘OOP’) on the privately-owned aircraft. AMAC’s completion and avionic team will perform...
AMAC Aerospace are proud to announce a new refurbishment project on a Bombardier Global 6000. End of June, AMAC Aerospace’s Bombardier Team will welcome the privately-owned Global 6000 in the new Hangar 5, dedicated to mid-size business aircraft. The signed contract...
AMAC Aerospace has won a new maintenance contract. The hangar doors will open in a couple of weeks to welcome a Bombardier Global 6000. AMAC’s skilled technicians will perform a 60-month check on the business aircraft. By Mid-June, AMAC Aerospace will welcome a Boeing...
AMAC Aerospace are proud to welcome a Boeing B737 in June in Basel, Switzerland. AMAC’s Boeing specialists will carry out a 1A, 2A, 4A and 1C Check on the privately-owned BBJ. The maintenance contract includes ‘Out of Phase’ (‘OOP’) tasks which will be performed by...
AMAC Aerospace are proud to announce two newly signed maintenance contracts on two Airbus ACJ319 aircraft. The first aircraft will arrive end of May in Basel for a heavy base maintenance check, the maintenance contract for the privately-owned ACJ319 includes 6-, 12-,...
AMAC Aerospace are proud to welcome back an Airbus A320 from a pre-existing customer. The privately-owned aircraft will arrive in summer in Basel, Switzerland. AMAC’s Airbus team will carry out a set of checks, including a 4-, 6-, 10-, 12-, 15-, 16- and 24-month...
AMAC Aerospace is one of the largest and recognized completion center in the world. AMAC Aerospace are proud to announce having been appointed by another completion center to support the induction of an aircraft in Europe. The experts from AMAC Aerospace and JCB Aero...
AMAC Aerospace welcomed a Boeing B737 in Basel, Switzerland. AMAC’s experts will carry out a Pre-Purchase Inspection (‘PPI’) on the privately-owned aircraft. The purpose of a ‘PPI’ is to inspect the aircraft for damage and wear that is not apparent at first glance and...
Some weeks ago, AMAC opened its hangar doors to welcome a Bombardier Global 6000. AMAC’s Bombardier team is performing an urgent middle slat replacement on the privately-owned aircraft. Slats are extendable, high lift devices on the leading edge of the wings of fixed...
AMAC Aerospace are proud to announce a newly signed contract with a major leasing company, on a Boeing B737-800. AMAC’s Boeing Team will install a Ka-Band to ensure a seamless internet connectivity at altitude. AMAC are proud to count this installation as the third...
AMAC Aerospace Switzerland has received a renewal of the Federal Office of Civil Aviation (FOCA) Part-145 approval in April 2021; Bombardier’s ultra-long-range business jet Global 7500 has been added to their maintenance portfolio. Since 2018, AMAC Aerospace are an...
AMAC Aerospace were awarded two new maintenance projects on Boeing B737-NG aircraft. Early April, AMAC Aerospace opened its hangar doors to welcome the first Boeing B737-NG aircraft in Basel, Switzerland. The privately-owned aircraft is undergoing an annual check and...
AMAC Aerospace proudly announce a new signed maintenance contract on a Boeing B737; the privately-owned aircraft will arrive in April in Basel, Switzerland. AMAC’s Boeing Team will perform several check up’s on the Boeing 737; besides a 1A-Check, the team will replace...
A privately-owned Airbus ACJ319 arrived last week in Basel Switzerland. The aircraft will undergo a 6-month check; the technicians will perform ‘Out of Phase’ (OOP) tasks and ‘Service Bulletins’ (SD’s) and ‘Airworthiness Directives’ (AD’s). The maintenance project...
AMAC Aerospace are proud to announce a newly signed maintenance contract on a Boeing B737-NG. The privately-owned aircraft will arrive in April for a landing gear overhaul on short notice. A Boeing 747 has four main landing gears in its center section, as well as its...
By the end of March, a Gulfstream G450 shall be positioned in AMAC’s hangar 5 in Basel, Switzerland. The privately-owned aircraft will undergo a Pre-Purchase Inspection (‘PPI’) as well a registration change. A second Gulfstream G450 is planned to arrive by the end of...
AMAC Aerospace opened its hangar doors of its recently finished hangar 5 to welcome two Bombardier aircraft, a Global 6000 and a Challenger 300. The Global 6000, a large business jet with a range of 6,000 nm, arrived end of March in Basel, Switzerland. AMAC’s...
After only 12 months of construction time, the latest hangar of AMAC Aerospace has opened its doors to welcome the first mid-size jets. The new building offers space for up to 7 mid-size jets and adds 4’850m2 respectively 30’000m2 of new apron to the four existing...
AMAC Aerospace are proud to have signed two new maintenance contracts on Boeing Business Jets. A privately-owned Boeing B737-NG will arrive in June in Basel, Switzerland, to undergo a heavy C-Check including a 1A-, 2A-, 4A-, 6A- and 4C-Check. During the ground time,...
AMAC Aerospace was awarded with a new maintenance project on an Airbus ACJ319: The privately-owned narrow-body twin-engine jet has entered AMAC’s hangar in Mid-March. AMAC’s Airbus Team will carry out a 72-month-check on the aircraft.
In March, AMAC Aerospace opened its hangar doors to welcome a Boeing B737-NG. The long-term customer sent the narrow-body aircraft for a maintenance check to Basel, Switzerland. The maintenance contract on the privately-owned aircraft includes a 1A and 2A Check as...
AMAC Aerospace welcomed a McDonnell Douglas MD-87 for a 6C-Check in February. While AMAC’s maintenance team were performing the comprehensive maintenance checks the client decided to expand the project scope by replacing the carpet of the interior cabin and having the...
Early February, an AOG support request reached AMAC Aerospace in Basel, Switzerland. An existing customer from the African continent asked AMAC’s maintenance team to support his grounded Boeing B737. AMAC responded quickly; a team of experts was ready within a few...
A Head of State Boeing B747 has been inducted at AMAC Aerospace beginning of February. The wide-body Aircraft will undergo a major C-Check: AMAC’s teams will carry out a detailed inspection of the aircraft structure and run thorough tests of the systems. During the...
AMAC Aerospace opened the hangar doors for a Boeing B747. The Head of State aircraft entered AMAC for a V-VIP major cabin modification. AMAC Aerospace’s Boeing- and Completion teams are going to carry out touch-ups and replacements on several soft and hard materials...
End of January, AMAC Aerospace returned an Airbus A320 to service. AMAC Aerospace’s skilled experts had carried out a C-Check and overhauled the Auxiliary Center Tanks (ACT’s) on the Head of State Airbus. In parallel, AMAC’s completion-team carried out various minor...
AMAC Aerospace are proud to announce having been awarded two new maintenance contracts on Bombardier aircraft. An existing customer signed a contract for an annual maintenance check and a 30-month inspection on his Global 5000. The Bombardier aircraft arrived early...
AMAC Aerospace were awarded a new maintenance project for a Boeing B777. The privately-owned aircraft will enter AMAC’s facilities at the end of January and will undergo a 1A-Check and an 8-month check in Basel, Switzerland. An A check covers general inspections of...
AMAC Aerospace were awarded a new maintenance project on a Bombardier Global Express. The aircraft will arrive end of January. AMAC’s Bombardier team will perform a 500-hours-check and a 15-month-check on the privately-owned aircraft and carry out Airworthiness...
AMAC Aerospace Switzerland has obtained a new Maintenance Approval from the Federal Office of Civil Aviation (FOCA) for the Gulfstream series 500/600. This certification entitles AMAC Aerospace to carry out maintenance work, to provide ‘Out of Phase’ work, engine...
AMAC Aerospace won three new projects in early 2021. A long-term customer of AMAC signed a maintenance contract for his Gulfstream G550. AMAC’s Gulfstream team will perform a 1C-, 3C-Check and ‘Out Of Phase’ tasks (OOP). The downtime will be used to install an...
Early January, a privately-owned Gulfstream G550 needed an AOG support at short notice. AMAC’s maintenance managers responded swiftly and sent a team within 24 hours to Zurich for the AOG support. AMAC Aerospace has gained an excellent reputation for providing high...
A Head of State Airbus A320 will arrive Mid-January in Basel, Switzerland. AMAC’s Airbus team will perform a 1C-, 2C- and 4C-Check and carry out ‘Out of Phase’ tasks (OOP). The AMAC Airbus team prepares all necessary tooling and materials for multiple C-Checks on a...
AMAC Aerospace welcomed a Head of State aircraft in Basel, Switzerland. AMAC’s avionics team is going to replace the data loader on an ACJ319. A data loader allows uploads of new software on the already built-in computers in the aircraft. A second maintenance contract...
AMAC Aerospace are proud to have been awarded a new project on a McDonnell Douglas MD-87. The privately-owned aircraft is planned to arrive in February 2021 in Basel, Switzerland, for a 6C-Check. AMAC’s technicians will carry out comprehensive tasks on the aircraft,...
ISO 45’001 is an international standard that sets out requirements for occupational health and safety management systems. It allows an organization to proactively improve its occupational health and safety performance, in the prevention of injury and damage to health....
AMAC Aerospace are proud to announce two new 2021 contracts; A Boeing 737-NG will arrive in January 2021 in Basel, Switzerland. AMAC’s technicians will carry out an ADSB-Out installation. In parallel, a 24-, 36- and 72-month check will also be performed on the...
In early December, AMAC Aerospace will open its hangars to welcome a Bombardier Challenger 300. AMAC’s Bombardier team will carry out an annual maintenance on short notice on the privately-owned Challenger 300 in Basel, Switzerland. By mid-December, an Airbus ACJ319...
AMAC Aerospace are proud to announce having won a new contract on a Boeing BBJ. The privately-owned aircraft will undergo an annual check. AMAC’s technicians will install an Automatic Dependent Surveillance (ADSB-Out) System. The ‘ADS-B’ System is primarily used by...
AMAC Aerospace opened its hangar doors to welcome a Bombardier Challenger 605 in Basel, Switzerland. The privately-owned aircraft will undergo several maintenance tasks at Bombardiers (Authorized Service Facility (ASF); a 500 hours APU inspection and a 6-, 12-, 24-,...
A Bombardier Global 6000 arrived early November for a Ka-Band installation, which will allow seamless connectivity on board. The customer demanded additionally some small cabin work, which AMAC will carry out simultaneously on the privately-owned Global 6000....
AMAC Aerospace have been awarded two new projects on Boeing BBJ’s. The first Boeing B737-NG arrived early November. AMAC’s avionics team will install an In-Flight-Entertainment system (IFE) on the privately-owned BBJ. The second Boeing B737 will undergo a base...
AMAC Aerospace are happy to welcome a Gulfstream IV in Basel, Switzerland. The privately-owned aircraft will undergo multiple C-Checks. The interior cabin will receive a minor update; AMAC’s craftsmen will refurbish the interior; soft materials will be exchanged and...
At the end of October, AMAC Aerospace opened its hangar doors for a wide-body Boeing in Basel, Switzerland. AMAC’s Boeing Team is going to install a Gogo 2Ku Inflight System on an esteemed client aircraft. The connectivity solution from Gogo delivers more bandwidth...
AMAC Aerospace are proud to announce a newly awarded maintenance project on an Airbus ACJ319. At the end of October, AMAC will welcome the ACJ319 in Basel, Switzerland. AMAC’s Airbus Team is going to perform a 4C-Check. The 4C-Check includes a detailed inspection of...
Mid-October, AMAC Aerospace welcomed a privately-owned Boeing BBJ737 for a 12-year inspection in Basel, Switzerland. This inspection, a so called D-Check, is by far the most comprehensive and demanding check for an aircraft; more or less the entire aircraft is taken...
AMAC Aerospace will welcome early November a privately-owned Gulfstream 550 for a C-check in Basel, Switzerland. Designated areas undergo a thorough visual inspection and specified components and systems have to prove being operational and functional. It is a...
In the first week of October, AMAC Aerospace were happy to welcome a Boeing B787 at the hangars in Basel, Switzerland. The privately-owned B787 will undergo a due 12-month check at AMAC’s headquarter. AMAC’s Boeing Team is ready to carry out a C-Check on a Boeing...
Last week, AMAC Aerospace were pleased to welcome in its headquarter at the EuroAirport Basel a Head of State McDonnell Douglas MD-87; AMAC’s team will install a new generation of the Cockpit Voice Recorder (‘CVR’) and a Flight Data Recorder (‘FDR’) system. AMAC has...
“We care. Fly safe.” In the current pandemic Covid-19, safety matters even more. AMAC Aerospace is offering aircraft cabin disinfection services at their hangars in Basel, Switzerland as well as in Bodrum and Istanbul, Turkey. For any type of aircraft, safe and...
AMAC Aerospace are happy to welcome two Boeing BBJ737 in Basel, Switzerland. The owner of the two aircraft commissioned AMAC’s Boeing team to carry out two Ka-Band installations. The ground time will be used to perform also base maintenance checks. Mid-September, a...
An annual inspection on a Bombardier Challenger 605 has been awarded to AMAC Aerospace. The privately-owned aircraft already arrived at AMAC’s hangar in Basel, Switzerland. On a Bombardier Global 6000, AMAC’s experts are going to carry out a Pre-Purchase Inspection...
AMAC Aerospace are happy to welcome an Airbus A318 in September; the privately owned A318 will undergo a 1A, 2A, 3A check and as well ‘OOP’ (Out Of Phase) tasks in Basel, Switzerland. The Airbus Team will welcome an A319 beginning of October; the team will carry out a...
On a Boeing BBJ a 1A-due maintenance is scheduled for mid September at AMAC Aerospace in Basel, Switzerland. The privately owned Boeing B737 will also undergo small refurbishment work. A second Boeing BBJ is also planned; the already existing customer will bring its...
New maintenance contracts have been awarded to AMAC Aerospace, on three Bombardier Global 6000’s; On the first Global 6000 AMAC will perform 450/900 landing checks and perform at the same time a 15 month check. The privately owned aircraft will arrive in autumn at...
AMAC Aerospace are proud to announce a new signed contract for a ‘PPI’ (Pre-Purchase Inspection) on a Gulfstream G450. The customer is a long term Gulfstream operator and one of AMAC’s early customers. The object of a ‘PPI’ is to examine the aircraft for damage and...
AMAC Aerospace has been selected to undergo a carpet change on a Boeing BBJ. The Asian customer confirmed the arrival of the aircraft in September in Basel, Switzerland. For operational reasons the aircraft will need to change the carpet on short layout of 3.5 days....
Mid of August, a Bombardier Global 6000 was released back on time for its business missions. The privately-owned aircraft arrived at the beginning of July in Basel. In the past few weeks, AMAC’s Bombardier Team carried out a 15-month inspection. AMAC Aerospace is an...
AMAC Aerospace are proud to announce having signed a new contract on an Airbus ACJ319. The Head-of-State aircraft will undergo a 4C-Check and a landing gear overhaul in Basel, Switzerland. AMAC’s Airbus Team is looking forward to welcoming the Airbus ACJ319 in...
End of July, AMAC Aerospace performed two AOG supports at Zurich Airport, Switzerland. A privately-owned Challenger 605 and a privately-owned Gulfstream G550 requested immediate support. AMAC Aerospace sent within hours of receiving the request and had both aircraft...
A new maintenance contract has been awarded to AMAC Aerospace. An Airbus ACJ319 will arrive in late August/early September 2020 in Basel, Switzerland. The privately-owned aircraft will undergo a 6-, 12-, 24- and 108-month check. A second Airbus, an ACJ330, has already...
A Boeing BBJ arrived last week at AMAC’s hangars in Basel, Switzerland. The privately-owned B737 will undergo a 6-month check including Service Bulletins (SB) tasks and an annual inspection. AMAC will also perform some minor modifications on the interior of the...
AMAC Aerospace were awarded with a new project on an Airbus ACJ340. The Head-of-State aircraft will arrive by the end of July and is planned to stay for two months at AMAC’s headquarters in Basel, Switzerland. The Airbus ACJ340 will undergo a C-Check at AMAC’s...
At the beginning of July, AMAC Aerospace signed a new contract for a maintenance project on a Bombardier Global Express. The privately-owned aircraft is coming to Basel, Switzerland to undergo a 750-/ 1500-/ 3000-hours inspection. Furthermore, AMAC Aerospace will...
Clients expect to have seamless connectivity and use of broad-band access in their aircraft – on ground and in the air. AMAC Aerospace has been awarded to upgrade the connectivity system on a privately-owned Bombardier Global 6000. Since becoming an Authorized Service...
AMAC Aerospace signed a new contract on a Boeing B747. The Head of State aircraft will arrive by the end of July and AMAC Aerospace will carry out a multiple C-Check package. Moreover, AMAC Aerospace won a project on an Airbus ACJ319. AMAC will perform a 6-, 12-, 18-...
AMAC Aerospace are pleased to announce the arrival of an Airbus ACJ320. The privately-owned aircraft arrived by the end of June and will undergo a 2C-Check inspection in Basel, Switzerland. A further maintenance check on an Airbus ACJ320 is in the pipeline; a...
AMAC Aerospace’s team completed an 8C-Check on a privately-owned Bombardier Global XRS in Basel, Switzerland. The aircraft arrived by the end of February to undergo a maintenance check. While on ground, a cabin refurbishment was completed as well as avionics...
An Airbus ACJ319 of a long-standing customer will enter in early June AMAC Aerospace’s Hangar in Basel, Switzerland. The privately-owned Airbus ACJ319 will undergo a 1A- and 2A-checks and due tasks. AMAC Aerospace’s experts will also install Airworthiness Directives...
AMAC Aerospace will complete a base maintenance check on an Airbus ACJ320. The customer decided to extend the project; AMAC will carry out a full galley heating system modification. The aircraft has to stay in Basel, Switzerland six weeks longer than planned before...
AMAC’s Boeing Team are pleased to welcome two new maintenance projects in Basel, Switzerland. A Boeing BBJ737 will arrive in week 22 to undertake a 6a-check and a due maintenance. In conjunction with the maintenance checks, AMAC will also carry out SB (Service...
AMAC Aerospace proudly welcomed a Head of State aircraft. The Bombardier Challenger 605 arrived in mid-May; the maintenance teams of AMAC will perform a 12-months inspection. This week, AMAC Aerospace are opening their hangar doors for a Global Express. The...
AMAC Aerospace’s maintenance team welcomed an Airbus ACJ319; the privately-owned ACJ319 arrived in Basel, Switzerland to undergo a 6-, 12- and 25-month check. A second Airbus ACJ319 will arrive in mid-May. The privately-owned Airbus will undergo a 6-month check. AMAC...
Two new Gulfstream maintenance projects have been awarded to AMAC Aerospace in Basel, Switzerland. The first Gulfstream G550 arrived last week in Basel, Switzerland. AMAC’s technicians will perform an annual check on the privately-owned G550. On a second Gulfstream...
Two new maintenance projects have been awarded to AMAC Aerospace. Mid-April, AMAC Aerospace welcomed a Bombardier Challenger 605 in Basel, Switzerland. The Head of State aircraft will undergo a periodic inspection. In May, AMAC Aerospace will open its hangar door for...
A privately-owned Bombardier Global 6000 will arrive by the end of April in Basel, Switzerland. AMAC Aerospace will complete an aircraft registration change for the owner and carry out a periodic inspection. AMAC’s Bombardier Team is also pleased to welcome a...
As announced end of March, AMAC Aerospace is currently doing a refurbishing of the full cabin interior and upgrading the avionic systems on a Bombardier Global XRS. The owner decided as well to renew all soft materials including the existing sofas. They will be...
AMAC Aerospace has been awarded two new projects, one on a Bombardier Global 6000 and another one on an Airbus ACJ318. A Global 6000 will enter AMAC’s hangar in April. The privately-owned Global 6000 will undergo a 15- and 30-month check. Within a 1000h check AMAC...
AMAC Aerospace are looking forward to welcoming two new Airbus aircraft in April in Basel, Switzerland. A privately-owned Airbus ACJ319 will enter AMAC’s hangar doors to undergo a 6-, 12-, and 24-month check. A second Airbus ACJ319 will undergo several maintenance...
AMAC Aerospace proudly announces having been awarded a substantial project on a Bombardier Global XRS. The privately-owned Global XRS arrived at the end of February and is undergoing a 120-month inspection in Basel, Switzerland. Besides the maintenance check, AMAC...
A Head of State aircraft will arrive mid of March in Basel, Switzerland. AMAC Aerospace will carry out a cabin rectification on the Gulfstream G450 and perform a 1C-Check on the aircraft.
AMAC Aerospace are proud to announce a new signed project on a Boeing BBJ 747-8. The cabin of the BBJ 747-8 will be re-configured and the whole interior will be brought to the latest level. To equip the aircraft with the latest technology, AMAC Aerospace will install...
AMAC Aerospace are proud to announce an awarded maintenance check and an AOG support, both on Boeings BBJ B737. Beginning of April 2020, AMAC’s technicians will welcome a Boeing BBJ 737 in Basel, Switzerland. AMAC’s team will carry out an annual check on the...
First Airbus ACJ 320neo returns to service after green completion at AMAC Aerospace AMAC Aerospace is pleased to announce that the very first Airbus ACJ 320neo has been returned to service to UK based Acropolis Aviation after a 13 months green completion at AMAC’s...
AMAC Aerospace has been awarded with the ISO 9001:2015 certificate. The International Organization for Standardization (ISO) creates documents that provide requirements, specifications, guidelines or characteristics that can be used consistently to ensure that...
AMAC Aerospace are proud to announce two new awarded maintenance projects. A Boeing BBJ 737 arrived last week in Basel, Switzerland. AMAC’s skilled technician are going to perform a 6-months-check on the privately-owned Boeing BBJ 737. A Bombardier Global 6000 arrived...
AMAC Aerospace are proud to announce three new signed contracts with two Bombardier’s aircraft and an Airbus ACJ. By the end of the month, AMAC Aerospace will welcome a Bombardier Global 5000 in Basel, Switzerland. The privately-owned Bombardier Global 5000 will...
AMAC Aerospace are proud to announce a successful re-delivery of a Boeing BBJ 737 and a new maintenance project on a Boeing BBJ 737. AMAC Aerospace will open its hangar doors next week to welcome a Boeing BBJ 737. The privately-owned aircraft will undergo a 1A-...
AMAC Aerospace are proud to be awarded the ISO 45001-2018 certificate. By certifying this ISO standard, AMAC Aerospace ensures that health protection becomes an integral part of the company culture. The well-being of AMAC’s employees is of high importance to the...
AMAC Aerospace are proud to announce new awarded maintenance projects on two Airbus aircraft. AMAC Aerospace will welcome an Airbus ACJ 318 in March 2020. The privately-owned Airbus ACJ 318 will undergo a 1A-, 2A-, 1C-, 2C- and 4C-check in Basel, Switzerland. An...
AMAC Aerospace are proud to announce new maintenance projects on a Global 6000, a Boeing B737 and a Gulfstream G550; A few days ago, AMAC Aerospace welcomed a Global 6000 in Basel, Switzerland. AMAC’s skilled technicians will carry out a 500, 1000 hours check on the...
AMAC Aerospace is proud to announce a newly signed contract for a 24 month check on an Airbus A318. In conjunction, AMAC Aerospace will carry out a landing gear-, a break-, a thrust reverser- and a forward engines mounts overhaul on the privately owned Airbus. AMAC...
AMAC Aerospace are proud to announce a refurbished and reconfigured airliner; It’s the first time AMAC Aerospace has been chosen to undergo a refurbishment on an Airbus Airliner A319. “We are very proud to have been awarded from a Swiss Airline company and to make a...
AMAC Aerospace are proud to announce the arrival of an Airbus A330 from an already existing client. The Airbus A330 will arrive for a heavy base maintenance check. In parallel AMAC Aerospace will remove the full VIP cabin for structural inspections and several...
AMAC Aerospace are proud to announce a newly signed contract for a KA-Band installation on an Airbus A321. It will be AMAC’s first KA-Band installation on an Airbus A321. AMAC Aerospace is extending its existing STC capabilities, which is already covering Airbus A319,...
AMAC Aerospace are proud to welcome a privately owned Airbus A319 by mid of January 2020. The privately owned A319 will undergo a 6 month check and annual tasks. AMAC Aerospace will also carry out AD’s (Airworthiness Directives) and SB’s (Service Bulletins) tasks....
AMAC Aerospace are proud to welcome two new maintenance projects in January 2020, a Boeing BBJ B737 and an Airbus A319 in Basel, Switzerland; A privately owned Boeing BBJ B737 will arrive mid of January to undergo a 1A-Check, an ‘OOP’ (Out Of Phase) and AD’s...
AMAC Aerospace are proud to announce two new maintenance contracts on a Gulfstream GV and an Airbus A320 AMAC Aerospace will welcome a Gulfstream GV beginning of next week. The Head of State aircraft will undergo an annual inspection in Basel, Switzerland. On an...
AMAC Aerospace is proud to announce a successful re-delivery of a Boeing B737 and signed new contracts for two Airbus A319; Two weeks ago AMAC Aerospace accomplished a project on a Boeing B737. The aircraft underwent a full cabin interior refurbishment and in addition...
AMAC Aerospace is proud to announce three new signed contracts with Airbus’ aircraft; A Head of State will bring its two Airbus’ aircraft to Basel, Switzerland. An Airbus A320 will have carried out a C-Check package, a KA-Band installation and a cabin interior...
AMAC Aerospace are proud to welcome two new aircraft beginning of 2020; Beginning of January 2020 AMAC will open its hangar doors for a Global 5000. The privately owned Global 5000 will carry out a 15 + 30 month check, a 500/750 hours check and a partial cabin...
AMAC Aerospace are proud to announce two newly awarded maintenance projects on Airbus’ aircraft and an arrival of a Boeing B737 in Basel, Switzerland; At the beginning of January, AMAC Aerospace will welcome an Airbus A319 at its headquarter Basel, Switzerland. The...
AMAC Aerospace are happy to announce two newly signed contracts for Airbus’ aircraft: Beginning of 2020 AMAC Aerospace will open its hangar doors to welcome a privately owned Airbus A319. With a developed STC, AMAC will install a KA-Band system on the A319. This STC...
AMAC Aerospace are proud to announce three new Boeing projects: AMAC Aerospace signed a new contract for a Boeing B737. The Privately owned aircraft will arrive at AMAC in the next few weeks and will undergo a ‘PPI’ (Pre-Purchase Inspection) on short notice. An...
AMAC Aerospace are proud to announce a newly signed contract with a Boeing B737. The privately owned aircraft will arrive in February 2020 for a C3-Check. AMAC will carry out a landing gear overhaul, an ADSB-Out* installation, a FANS Installation and a partial cabin...
AMAC Aerospace are proud to announce that after a major maintenance input in October on a Bombardier Global 5000, the customer of the aircraft decided to take the aircraft back to AMAC Basel, Switzerland to undergo a cabin refurbishment. The customer were very happy...
AMAC Aerospace are proud to announce four maintenance projects on Airbus’ aircraft; An Airbus A320 will enter AMAC’s facilities to undergo out a minor inspection, life TV activation and an ‘ADS-B Out’*. A second Airbus A320 arrived last week on short notice at AMAC...
AMAC Aerospace are proud to announce several awarded maintenance projects in Basel, Switzerland; AMAC’s qualified technicians will carry out an ‘ADSB-Out’ (Automatic Dependent Surveillance-Broadcast) installation on a Boeing B737. In conjunction they will perform a...
AMAC Aerospace are proud to announce two newly signed maintenance contracts, one for an Airbus A320 and the second one for a Gulfstream G550; AMAC Aerospace are proud to announce a signed contract with an Airliner Airbus A320 for an unscheduled maintenance. The Airbus...
AMAC Aerospace are proud to announce two newly awarded PPI’s (Pre-Purchase Inspections) on Bombardier aircraft and one completed maintenance input on a BBJ; A Global Express and a Global 5000 arrived at AMAC Aerospace in Basel Switzerland. AMAC Aerospace will carry...
AMAC Aerospace are proud to announce new awarded projects on two BBJ-aircraft; A contract for a C-Check on a Boeing B737 has been signed and AMAC will welcome the BBJ3 beginning of January. Besides the base maintenance, the B737 will undergo a cabin refurbishment....
AMAC Aerospace was once again able to prove its ability for an immediate reaction of an urgent request; AMAC received a call for an urgent replacement of a windshield on a Gulfstream G550. The immediate reaction of AMAC’s Managers and Supervisors was very quick and...
AMAC Aerospace are proud to announce a new maintenance project on an Airbus A318 and an AOG support on a Airbus A319; A Head of State Airbus A319 had some troubles during its flight missions and once again AMAC has been contracted for an AOG support on short notice....
AMAC Aerospace are proud to announce three new awarded maintenance projects on Gulfstream aircraft: AMAC Aerospace will welcome a Gulfstream G550 in December 2019. The Head of State G550 will undergo an annual check in Basel, Switzerland. A new customer signed a...
AMAC Aerospace are proud to announce a new request for an AOG support. AMAC was able to set up a team within 24 hours, which travelled to Munich, Germany for the AOG support on an Airbus A340. “AMAC Aerospace is known for its fast reaction on AOG support. It is...
AMAC Aerospace are proud to announce two newly awarded projects; one Bombardier Global 5000 and one Gulfstream G550; AMAC Aerospace shall perform a 60 month inspection on the Global 5000. The privately owned Bombardier aircraft will arrive in November in Basel,...
AMAC Aerospace exhibited the first time at the MEBAA Morocco exhibition. The MEBAA Show is the leading business aviation platform for the Middle East & North Africa which allows exhibitors as well as visitors to access the business aviation market. Mr. Tarek...
AMAC Aerospace are proud to announce two redeliveries: a Bombardier Challenger 605 and a Boeing B747; AMAC Aerospace was able to redeliver a Head of State Bombardier Challenger 605 after an intensive work package within a reduced ground time to AMAC’s customer’s...
AMAC Aerospace are proud to announce a new signed contract on a Boeing B747; AMAC Aerospace could assert itself against its competitors again; a new customer signed a contract with AMAC Aerospace in Basel. The Head of State Boeing B747 will undergo a cabin interior...
AMAC Aerospace are proud to announce three new awarded PPI’s (Pre-Purchase Inspections) on Bombardier aircraft. A Global Express will arrive next week in Basel, Switzerland. The privately owned Global Express will undergo a PPI at AMAC Aerospace. One Global Express...
AMAC Aerospace are proud to announce a new maintenance project on a Bombardier Challenger 605 and an AOG Support in France; AMAC Aerospace will welcome a Bombardier Challenger 605 in Basel Switzerland. AMAC’s skilled mechanics will perform the first ‘Pro Line 21’...
AMAC Aerospace are delighted to announce a full cabin lightening installation on a Gulfstream GIV. The privately owned GIV will replace the entire lightening with a new LED system. Beginning of September AMAC Aerospace will open its hangar doors for a Gulfstream G450....
AMAC Aerospace are proud to announce newly awarded maintenance contracts on four Boeing B737’s; AMAC Aerospace started this week with a due maintenance check on a Boeing B737 from a new client. The privately owned aircraft will undergo, besides a due maintenance, an...
AMAC Aerospace are proud to announce a new awarded AOG support on a Gulfstream G550. AMAC Aerospace was able to send a team to Portugal within 24 hours. By the end of September, AMAC Aerospace will welcome a Challenger 350. The privately owned Challenger 350 will...
AMAC Aerospace are proud to announce two new maintenance projects on two BBJ 737’s; One privately owned Boeing B737 will arrive in September and AMAC’s Boeing team will perform an A1, B2 and A2 check. The second Boeing B737 signed a contract for a C-Check maintenance...
AMAC Aerospace are proud to welcome a new customer at AMAC Aerospace in Basel, Switzerland. The Boeing BBJ B737 will arrive beginning of September and will undergo a C-Check. AMAC’s experienced technicians will install an ‘ADS-B Out’ (Automatic Dependent...
AMAC Aerospace are proud to announce two new signed maintenance contracts for two Airbus 340’s; AMAC Aerospace secured a contract with an Airbus A340 for a 6 year inspection. The Head of State Airbus A340 will arrive at AMAC Aerospace in November 2019. Besides the 6...
AMAC Aerospace are proud to announce three new maintenance contracts in Basel, Switzerland; A privately owned Gulfstream G450 signed a maintenance contract with AMAC Aerospace for a 4 month inspection in Basel, Switzerland. Besides the maintenance input, AMAC...
AMAC Aerospace are proud to announce a completed maintenance input on a Global 6000. Mid of July the privately owned aircraft entered AMAC’s hangars for a 15 month inspection. In conjunction, AMAC Aerospace carried out a fuselage painting rectification and...
AMAC Aerospace are proud to announce three new ‘ADS-B Out’ (Automatic Dependent Surveillance-Broadcast) installations; Two privately owned Boeing B737 arrived by end of July for the ‘ADS-B Out’ installation and simultaneously they will undergo a small maintenance...
AMAC Aerospace are proud to announce that two aircraft have been completed and two new contracts have been signed in Basel, Switzerland; Beginning of August an Airbus A319 has been released to service from AMAC after a major maintenance input. Besides the maintenance...
AMAC Aerospace are proud to announce two finished maintenance projects on two Boeing 737 in Basel, Switzerland: Mid-June, a Boeing B737 entered AMAC’s facility to undergo a maintenance check. AMAC Aerospace’s skilled mechanic teams were able to complete the heavy base...
AMAC Aerospace are delighted to announce two new requests for AOG supports. As already mentioned in the weekly news, AMAC is often contacted regarding AOG support; An AOG support team from AMAC Aerospace Basel, Switzerland, was sent to Zurich to perform an AOG...
AMAC Aerospace are proud to announce new maintenance contracts on two Airbus-, one Boeing and one Gulfstream aircraft: An Airbus A340 has entered AMAC’s facilities in Basel, Switzerland to undergo an unscheduled maintenance input. From the same family, AMAC was...
AMAC Aerospace are proud to announce that AMAC’s CAMO (Continuing Airworthiness Organization) team is increasingly receiving more request in Basel, Switzerland. Due to excellent reputation and the expertise of AMAC Aerospace, its CAMO team is increasingly required as...
AMAC Aerospace are proud to announce that a team has been sent abroad for two AOG supports; AMAC Aerospace in Switzerland received an AOG request a few days ago and was able to send a team to Amsterdam, within a half day, to provide an AOG support on a Gulfstream GV....
AMAC Aerospace are proud to announce two new maintenance contracts, one for an Airbus A319 and another maintenance project on a Bombardier Challenger 605; AMAC Aerospace in Basel, Switzerland, will welcome an Airbus A319 for a 6, 12, 18 and 36 month inspection. The...
AMAC Aerospace are proud to announce one completed maintenance project on an Airbus A320 and another on a Boeing B737-BBJ; AMAC Aerospace carried out a major C-Check package including structural repairs on an Airbus A320 The Head of State aircraft was successful...
AMAC Aerospace are proud to announce new maintenance contracts on a Gulfstream G450, Airbus A318 and an Airbus A319; A Gulfstream G450 entered AMAC’s hangar at the beginning of July in Basel, Switzerland. The Head of State Gulfstream G450 will undergo a double engine...
AMAC Aerospace are proud to announce that they have been contacted again for two AOG support situations and that a new client’s BBJ arrived at AMAC’s hangars in Basel, Switzerland; AMAC’s Bombardier team completed an AOG support on a Global 6000. Another team was...
AMAC Aerospace are proud to announce a new maintenance project on an Airbus A318. The privately owned Airbus A318 will undergo a basic inspection and a weekly check. In combination with the maintenance check, AMAC Aerospace will replace the full cabin carpet of the...
AMAC Aerospace are proud to announce an induction of a Boeing B747 at AMAC Aerospace in Basel, Switzerland. The Head of State aircraft will undergo a base maintenance input and in addition AMAC Aerospace will carry out client desired modifications. AMAC Aerospace are...
AMAC Aerospace are proud to announce a maintenance project on a Boeing B747; whereby AMAC Aerospace welcomed the Head of State Boeing B747 on short notice to undergo an unscheduled maintenance input in Basel, Switzerland. “We are very proud of having our four big...
AMAC Aerospace are proud to announce two new maintenance projects and one successful redelivery of a privately owned Global 6000. A Boeing B737 arrived mid June in Basel, Switzerland. AMAC Aerospace will carry out an annual check on the Head of State aircraft. AMAC...
AMAC Aerospace are proud to announce new maintenance projects on two Bombardier aircrafts: A Bombardier Global 5000 entered AMAC’s Hangar in Basel Switzerland for due maintenance. AMAC Aerospace shall carry out a 15 month inspection in conjunction with a 500 hours...
AMAC Aerospace are proud to announce a completed maintenance project on a Boeing B777. The Head of State aircraft could leave AMAC for its missions on time. In addition to an accomplished C-Check of AMAC Aerospace in Basel, Switzerland, AMAC’s dedicated licensed...
AMAC Aerospace continues to expand; the start of AMAC’s hangar 5 in Basel, Switzerland, started in April 2019. The property of AMAC Aerospace at the Euro Airport will be extended by approximately 22’000m2. This fifth hangar will be dedicated exclusively to...
AMAC Aerospace are proud to announce a completed maintenance project on a Gulfstream G450. After a double engine change and a ‘PPI’ (Pre Purchase Inspection), AMAC could successfully release the aircraft in Basel, Switzerland. AMAC Aerospace was also able to release...
AMAC Aerospace are proud to announce new awards for maintenance projects; a Global 5000, a Gulfstream G5, an Airbus A319, a Boeing B777 and on a Boeing B737; In June AMAC Aerospace will open its hangar doors for a Global 5000. The privately owned Bombardier aircraft...
AMAC Aerospace are proud to announce that a small reportage about AMAC Aerospace was shown on Television, during the month of May and it coincided with EBACE, our largest trade Show of the year. RTS (Swiss-French TV Channel) created a reportage on its T.T.C. show. The...
AMAC Aerospace is proud to announce three maintenance projects for our Bombardier clients, two new contracts have been signed and one project has been completed; One Global 5000 arrived mid May to undergo a 15 month due maintenance with SB’s (Service Bulletins). The...
AMAC Aerospace are proud to report that an Airbus A319 was inducted for cabin refurbishment and partial cabin modifications. This privately owned ACJ A319 arrived by the end of May in AMAC’s facilities in Basel, Switzerland. At the end of May, AMAC Aerospace welcomed...
AMAC Aerospace successfully exhibited at EBACE, from the 21st to the 23rd May 2019 in Geneva, Switzerland. Since 2007 AMAC has taken part at the European Business Aviation Convention and Exhibition (EBACE). AMAC Aerospace was present with a delegation from AMAC...
AMAC Aerospace are proud to announce three new maintenance projects: A privately owned Global 6000, from a new customer, entered this week AMAC Aerospace’s hangar in Basel, Switzerland. The Global 6000 will undergo a 15 month due maintenance in conjunction with SB’s...
AMAC Aerospace are proud to announce a successful redelivery of an Airbus A318 and a new signed maintenance project on a Boeing B747-8: On an Airbus A318 a major C-Check package has been completed by AMAC Aerospace in Basel, Switzerland. Besides the C-Check AMAC’s...
AMAC Aerospace is proud to announce that it has been awarded several new maintenance contracts: AMAC Aerospace welcomed a privately owned Airbus A320 on short notice for an AOG support in Basel, Switzerland. Beginning of May AMAC Aerospace will carry out a 2C-Check on...
AMAC Aerospace is delighted to announce new maintenance contracts on two Boeings B737 and on a Gulfstream GV: AMAC Aerospace in Basel, Switzerland will open its hangar doors for two Boeings B737 beginning of May. One privately owned B737 will undergo a B1, B2, C1 and...
AMAC Aerospace are proud to announce that two new maintenance projects for two Airbus A318’s, have been awarded to AMAC Aerospace in Basel, Switzerland: A privately owned Airbus A318 was welcomed at AMAC Aerospace to undergo a maintenance input. The skilled AMAC...
AMAC Aerospace’s Group of Companies was present at the AIX (Aircraft Interior Expo) in Hamburg, Germany 2019, the world’s leading event for platforms in technologies and products for cabin interiors in-flight entertainment systems on all commercial and business...
AMAC Aerospace is proud to announce that three new maintenance contracts have been signed: A privately owned Airbus A319 arrived this week in Basel, Switzerland. AMAC Aerospace will carry out a C-Check and a landing gear overhaul. A Global XRS arrived on short notice...
AMAC Aerospace is pleased to announce two new signed projects in Basel, Switzerland. One signed project is for a refurbishment contract and the second, newly, signed contract is for a cabin modification. A Head of State Boeing B777 will arrive mid of April for a...
With the newly appointed ‘ASF’ (Authorized Service Facility) approval from Bombardier, AMAC is experiencing a surge in aircraft support requests for these aircraft platforms. AMAC Aerospace will carry out a 12 month check and SB’s (Service Bulletin’s) on a Global...
AMAC Aerospace are proud to announce a successfully installed KA-Band installation. A Jet Wave KA-Band Antenna has been installed on a Boeing B737-800. The KA Band Antenna is in high demand as it provides full connectivity on board all aircraft. As previously...
AMAC Aerospace is proud to announce that it has been awarded for a cabin refurbishment and reconfiguration on an Airbus A319: AMAC Aerospace will welcome an Airbus A319 in Basel, Switzerland for a cabin refurbishment and a partial cabin reconfiguration. AMAC’s...
AMAC Aerospace are proud to announce three new maintenance contracts on a Bombardier Global 6000, a Gulfstream G450 and on a Boeing B737: A privately owned Bombardier Global 6000 will arrive in Basel, Switzerland by the end of March. AMAC is Bombardiers’ ASF...
AMAC Aerospace are pleased to announce two signed Airbus maintenance contracts: An Airbus A340 has recently arrived in the hangar of AMAC Aerospace in Basel for AOG support. AMAC accepted the AOG request at short notice and the aircraft shall be re-delivered on time....
AMAC Aerospace are pleased to announce that two new maintenance contracts have been awarded to AMAC Aerospace in Basel, Switzerland: A Head of State MD87 will undergo a 1A check and in conjunction an ‘OOP’ (Out Of Phase) tasks will be performed. The due maintenance on...
10 years of hard work, a growing strategy, projects of diversity have seen AMAC Aerospace raise itself as one of the youngest, strongest MRO’s and Completion centres in the world with a healthy appetite to serve our clients from around the world as a leading company...
AMAC Aerospace proudly announces a completed project on a Gulfstream G650. The new Head of State Gulfstream G650 was delivered from the OEM at the end of 2018 to AMAC Aerospace in Basel, Switzerland. The aircraft underwent a major modification and has been...
AMAC Aerospace is pleased to announce that a new contract has been signed for a Boeing B737. The aircraft will arrive mid of June in Basel, Switzerland. The aircraft will undergo a partial cabin interior refurbishment. AMAC will install new high definition monitors,...
AMAC Aerospace is delighted to announce a successful re-delivery of an Airbus A340. AMAC performed a C-Check in Basel, Switzerland. Beside the C-Check a landing gear overhaul was carried out and an installation on the FTI’s (Fuel-Tank-Inerting-Systems) was performed...
A privately owned Boeing B767 will enter AMAC’s facilities in Basel, Switzerland by the end of the month. AMAC Aerospace will carry out an engine change on the Boeing B767 within a reduced ground time. For this project a special shift plan has to be created to meet...
Three Airbus A319 maintenance projects have been awarded to AMAC Aerospace, Switzerland: A privately owned Airbus A319 will enter AMAC Aerospace’s facility in Basel, Switzerland by the end of February. AMAC has been awarded to provide a 6, 12 and 24 month inspection...
An award has been given to AMAC Aerospace on the 29th of January 2019. Mrs. Tracey Hawthorne-Kurz received the ‘Channel Partner Awards’ during the Honeywell Channel Partner and Operators Conference in Vienna, Austria. AMAC Aerospace is a key partner from Honeywell for...
AMAC Aerospace proudly announces that three Boeing B737 maintenance contracts have been awarded and they will enter AMAC’s Basel facility in the coming weeks. A Boeing B737 has been validated for a B1, B2 and a B4 check and arrived in Basel, Switzerland. Besides the...
Three new maintenance contracts have been awarded to AMAC Aerospace. Beginning of February AMAC will welcome a Global 6000 for a 60 month inspection with a reduced ground time. Furthermore two Gulfstream will enter AMAC’s facilities in Basel, Switzerland. An annual...
AMAC Aerospace Istanbul, Turkey is proud to announce that its first C-Check has been completed and the aircraft was successfully re-delivered to the customer. The Falcon 2000 underwent a C-Check and at the same time AMAC performed a full cockpit and cabin...
AMAC Aerospace is pleased to announce several new maintenance contracts in January, 2019: Two aircraft will arrive in Basel to perform their annual checks. The due maintenance will be carried out on an Airbus A319 and a Boeing B747. As AMAC is the new ASF (Authorized...
AMAC Aerospace is proud to announce that a Boeing B747 has entered AMAC’s facility by the end of December. The Head of State aircraft will undergo a heavy base maintenance input and several service bulletins. Several minor modifications will be performed in parallel...
AMAC Aerospace is pleased to announce that a new completion contract has been signed for a BBJ MAX 9. The aircraft will enter AMAC’s hangar facility in Switzerland 2020. It will be the first BBJ MAX 9 fully equipped by AMAC Aerospace in Switzerland. The interior...
AMAC Aerospace is proud to announce that its facility in Milas-Bodrum received approval for the European Aviation Safety Agency, EASA Part-145 Approval Certificate. The approval allows AMAC Aerospace in Milas-Bodrum to perform line maintenance on Airbus...
AMAC Aerospace is proud to announce that new maintenance projects have been awarded on Airbus, Gulfstream and Global Express. On a Gulfstream GV AMAC will carry out an annual base maintenance check at its Facility in Basel, Switzerland. One Airbus, an A340, has been...
AMAC Aerospace is proud to announce several new maintenance projects which are carried out in Basel, Switzerland. A Boeing B777 has entered the Hangars in Basel for landing gear overhaul. AMAC Aerospace’s skilled mechanics will perform removal and re-installation of...
AMAC Aerospace is proud to announce a new signed maintenance contract for a privately owned Airbus ACJ320. In October the ACJ320 will undergo a major maintenance input in Basel combined with a connectivity installation. AMAC will install a Honeywell Jetwave Ka Band...
AMAC Aerospace is pleased to open its Hangar doors in October for several maintenance checks. Beginning of October a Gulfstream G550 will undergo an annual maintenance check. A base maintenance check will also be carried out by AMAC on an Airbus A319, an Airbus A318...
A new contract has been signed for a 24-month inspection on an Airbus A330 in Basel and AMAC is proud to carry out this inspection within a reduced ground time. AMAC Aerospace is performing an annual heavy base maintenance on a Boeing B737 and in the next few weeks a...
AMAC Aerospace is pleased to announce that it has received several new maintenance projects, which will be carried out in Basel, Switzerland. A privately owned A318 arrived in August for a C-Check inspection and will undergo a landing gear overhaul at AMAC’s...
A Bombardier Global Express XRS* entered AMAC’s hangar doors for an extensive base maintenance check. The privately-owned aircraft undergoes a 120- month inspection including a landing gear and full cabin removal at AMAC Aerospace in Basel, Switzerland. In addition,...
AMAC Aerospace proudly announces that a new maintenance contract on a head-of-state A320 aircraft has been awarded to the facility in Basel, Switzerland. Besides a C-Check, that will be performed on the narrow-body, AMAC will also upgrade the existing IFE (inflight...
A major base maintenance input will be performed by AMAC Aerospace on a privately-owned A340-600 aircraft. This maintenance contract that has been awarded to AMAC by an existing client includes, a C-check and a landing gear overhaul in conjunction with a major cabin...
AMAC Aerospace’s inauguration of the Wide Body Hangar in Milas-Bodrum, Turkey was celebrated with 100+ guests from all over the world including politicians, airport authority officials, potential/ existing clients, military personnel and the under secretary for the...
AMAC Aerospace is pleased to announce that three maintenance contracts on Global Express aircraft have been awarded to AMAC Aerospace in Basel, Switzerland. Two contracts for Global Express have been signed to undergo annual maintenance checks and on one of them AMAC...
Several new maintenance contracts for small sized, narrow body and wide body aircraft have been awarded to AMAC Aerospace. A head-of-state B747-8i aircraft has entered AMAC’s hangar doors to undergo an annual base maintenance check. A second annual base maintenance...
AMAC Aerospace successfully exhibited at the European Business Aviation Convention and Exhibition (EBACE) as one of over 400 exhibitors from over 40 countries. This year was a record year for the EBACE exhibitors. Standing nearly at 486 sqm booth AMAC Aerospace...
AMAC Aerospace proudly announces that one of AMAC’s VIP Completion Projects, the BBJ Demonstrator, has been awarded by Design Et Al Awards and won its category ‘2018 Interior Design/ VIP Completion’. The prestigious BBJ Demonstrator Project that AMAC returned to...
AMAC Aerospace is proud to announce that Airbus Corporate Jets has appointed AMAC’s facility in Basel, Switzerland as an approved Completion Center for the ACJ350 XWB. As the latest addition to the Airbus family of VIP widebodies, the ACJ350 XWB offers innovative...
We are pleased to announce that Bombardier Business Aircraft has selected AMAC Aerospace to be its Authorized Service Facility (ASF) in Basel, Switzerland. Bombardier is a leader in business aviation with over 4,700 aircraft flying globally. The business jet...
AMAC Aerospace is pleased to announce the successful re-delivery of a B747-400 after a heavy maintenance check. The Head-of-State aircraft underwent a D-Check in conjunction with several part-21 modifications at AMAC’s hangar facilities in Basel, Switzerland. “We are...
AMAC Aerospace is proud to announce that new maintenance projects on Gulfstream, Global Express, Airbus and BBJ aircraft have been awarded to AMAC Aerospace in Basel, Switzerland. A privately owned Gulfstream GV aircraft will be undergoing an annual maintenance check,...
AMAC Aerospace successfully exhibited at the Aircraft Interiors Expo from the 10th to the 12th of April, 2018. The Aircraft Interiors Expo is the world’s leading event and platform for technologies and products for cabin interiors and in-flight entertainment systems...
Two new maintenance contracts have been awarded to AMAC Aerospace in Basel, Switzerland. An Airbus Corporate Jet A318 will undergo a D-Check in conjunction with the removal of the complete cabin and engines. The second maintenance contract consists of a C6-Check for a...
AMAC Aerospace proudly announces that its engineering department has developed a new STC (Supplemental Type Certificate) for the Ka band installation on an A319. The newly developed STC is a multiple Supplemental Type Certificate and has been made available to the...
A delegation from AMAC Aerospace presented its services and the company profile at the Airbus Corporate Jet Customer Forum in Dubai. The event, which took place from the 26th to the 28th of February, 2018, is the ideal platform to get an insight into the latest...
Tailwind Airlines has signed contracts with AMAC Aerospace for their fleet of Boeing 737-400 aircraft. This week the first aircraft arrived for maintenance and is undergoing a C13 check at AMAC’s new facility in Bodrum, Turkey. This involves removing the majority of...
A head-of-state Airbus 330 has entered AMAC Aerospace’s hangar doors in Basel, Switzerland. A C-check in conjunction with a full IFE upgrade to large 4K monitors, new switch panels and further enhancements for the passengers’ comfort during operations will be...
AMAC has welcomed an Airbus A319 aircraft at its headquarters in Basel, Switzerland for a heavy base maintenance check and a KA band installation. A 6- years inspection will be carried out by AMAC Aerospace in conjunction with the installation of a KA band system. The...
