NEWS
Find out the latest news from AMAC
AMAC Aerospace: Short response time for AOG Support request
Early February, an AOG support request reached AMAC Aerospace in Basel, Switzerland. An existing customer from the African continent asked AMAC’s maintenance team to support his grounded Boeing B737. AMAC responded quickly; a team of experts was ready within a few...
read moreNew arrival of Boeing B747 at AMAC Aerospace in Basel, Switzerland
A Head of State Boeing B747 has been inducted at AMAC Aerospace beginning of February. The wide-body Aircraft will undergo a major C-Check: AMAC’s teams will carry out a detailed inspection of the aircraft structure and run thorough tests of the systems. During the...
read moreArrival of Head of State Boeing B747 at AMAC Aerospace
AMAC Aerospace opened the hangar doors for a Boeing B747. The Head of State aircraft entered AMAC for a V-VIP major cabin modification. AMAC Aerospace’s Boeing- and Completion teams are going to carry out touch-ups and replacements on several soft and hard materials...
read moreSuccessful Re-Delivery of Airbus A320 after C-check and minor modifications
End of January, AMAC Aerospace returned an Airbus A320 to service. AMAC Aerospace’s skilled experts had carried out a C-Check and overhauled the Auxiliary Center Tanks (ACT’s) on the Head of State Airbus. In parallel, AMAC’s completion-team carried out various minor...
read moreNew Bombardier maintenance contracts for AMAC Aerospace
AMAC Aerospace are proud to announce having been awarded two new maintenance contracts on Bombardier aircraft. An existing customer signed a contract for an annual maintenance check and a 30-month inspection on his Global 5000. The Bombardier aircraft arrived early...
read moreTwo new maintenance projects on Boeing aircraft
AMAC Aerospace were awarded a new maintenance project for a Boeing B777. The privately-owned aircraft will enter AMAC’s facilities at the end of January and will undergo a 1A-Check and an 8-month check in Basel, Switzerland. An A check covers general inspections of...
read moreBusy January 2021: New maintenance projects on a Gulfstream GIV and a Bombardier Global Express
AMAC Aerospace were awarded a new maintenance project on a Bombardier Global Express. The aircraft will arrive end of January. AMAC’s Bombardier team will perform a 500-hours-check and a 15-month-check on the privately-owned aircraft and carry out Airworthiness...
read moreAMAC Aerospace: New approval for Gulfstream GVII (Gulfstream 500/600)
AMAC Aerospace Switzerland has obtained a new Maintenance Approval from the Federal Office of Civil Aviation (FOCA) for the Gulfstream series 500/600. This certification entitles AMAC Aerospace to carry out maintenance work, to provide ‘Out of Phase’ work, engine...
read moreNew projects on a Bombardier and two Gulfstream aircraft
AMAC Aerospace won three new projects in early 2021. A long-term customer of AMAC signed a maintenance contract for his Gulfstream G550. AMAC’s Gulfstream team will perform a 1C-, 3C-Check and ‘Out Of Phase’ tasks (OOP). The downtime will be used to install an...
read moreAt short notice: Two new projects awarded to AMAC Aerospace
Early January, a privately-owned Gulfstream G550 needed an AOG support at short notice. AMAC’s maintenance managers responded swiftly and sent a team within 24 hours to Zurich for the AOG support. AMAC Aerospace has gained an excellent reputation for providing high...
read moreAMAC starts in 2021 with three new projects on Airbus’ aircraft
A Head of State Airbus A320 will arrive Mid-January in Basel, Switzerland. AMAC’s Airbus team will perform a 1C-, 2C- and 4C-Check and carry out ‘Out of Phase’ tasks (OOP). The AMAC Airbus team prepares all necessary tooling and materials for multiple C-Checks on a...
read moreNew Maintenance Projects on two Airbus ACJ319
AMAC Aerospace welcomed a Head of State aircraft in Basel, Switzerland. AMAC’s avionics team is going to replace the data loader on an ACJ319. A data loader allows uploads of new software on the already built-in computers in the aircraft. A second maintenance contract...
read moreNew Awarded Heavy Maintenance Check on a McDonnell Douglas MD-87
AMAC Aerospace are proud to have been awarded a new project on a McDonnell Douglas MD-87. The privately-owned aircraft is planned to arrive in February 2021 in Basel, Switzerland, for a 6C-Check. AMAC’s technicians will carry out comprehensive tasks on the aircraft,...
read moreAMAC Aerospace: ISO 45’001 surveillance audit successfully passed
ISO 45’001 is an international standard that sets out requirements for occupational health and safety management systems. It allows an organization to proactively improve its occupational health and safety performance, in the prevention of injury and damage to health....
read moreAMAC Aerospace received two new Boeing Contracts for 2021
AMAC Aerospace are proud to announce two new 2021 contracts; A Boeing 737-NG will arrive in January 2021 in Basel, Switzerland. AMAC’s technicians will carry out an ADSB-Out installation. In parallel, a 24-, 36- and 72-month check will also be performed on the...
read moreNew maintenance projects for AMAC Aerospace in Basel, Switzerland
In early December, AMAC Aerospace will open its hangars to welcome a Bombardier Challenger 300. AMAC’s Bombardier team will carry out an annual maintenance on short notice on the privately-owned Challenger 300 in Basel, Switzerland. By mid-December, an Airbus ACJ319...
read moreADSB-Out installation on a Boeing BBJ
AMAC Aerospace are proud to announce having won a new contract on a Boeing BBJ. The privately-owned aircraft will undergo an annual check. AMAC’s technicians will install an Automatic Dependent Surveillance (ADSB-Out) System. The ‘ADS-B’ System is primarily used by...
read moreNew Awarded Maintenance Contracts for AMAC Aerospace
AMAC Aerospace opened its hangar doors to welcome a Bombardier Challenger 605 in Basel, Switzerland. The privately-owned aircraft will undergo several maintenance tasks at Bombardiers (Authorized Service Facility (ASF); a 500 hours APU inspection and a 6-, 12-, 24-,...
read moreNew awarded contracts on two Bombardier aircraft for AMAC Aerospace
A Bombardier Global 6000 arrived early November for a Ka-Band installation, which will allow seamless connectivity on board. The customer demanded additionally some small cabin work, which AMAC will carry out simultaneously on the privately-owned Global 6000....
read more‘IFE’ Installation & Base Maintenance: AMAC Aerospace won two new Contracts on Boeings BBJ’s.
AMAC Aerospace have been awarded two new projects on Boeing BBJ’s. The first Boeing B737-NG arrived early November. AMAC’s avionics team will install an In-Flight-Entertainment system (IFE) on the privately-owned BBJ. The second Boeing B737 will undergo a base...
read moreMultiple C-Checks, Refurbishment and a Pre-Purchase-Inspection – AMAC Aerospace won new contracts on an Airbus ACJ319 and a Gulfstream IV
AMAC Aerospace are happy to welcome a Gulfstream IV in Basel, Switzerland. The privately-owned aircraft will undergo multiple C-Checks. The interior cabin will receive a minor update; AMAC’s craftsmen will refurbish the interior; soft materials will be exchanged and...
read moreGogo 2Ku Inflight System Installation on a wide-body Boeing
At the end of October, AMAC Aerospace opened its hangar doors for a wide-body Boeing in Basel, Switzerland. AMAC’s Boeing Team is going to install a Gogo 2Ku Inflight System on an esteemed client aircraft. The connectivity solution from Gogo delivers more bandwidth...
read moreNew awarded Heavy Maintenance Check on an Airbus ACJ319
AMAC Aerospace are proud to announce a newly awarded maintenance project on an Airbus ACJ319. At the end of October, AMAC will welcome the ACJ319 in Basel, Switzerland. AMAC’s Airbus Team is going to perform a 4C-Check. The 4C-Check includes a detailed inspection of...
read moreTwo Boeing B737: Extensive Maintenance Checks and Ka-Band Installation
Mid-October, AMAC Aerospace welcomed a privately-owned Boeing BBJ737 for a 12-year inspection in Basel, Switzerland. This inspection, a so called D-Check, is by far the most comprehensive and demanding check for an aircraft; more or less the entire aircraft is taken...
read moreAMAC Aerospace Maintenance: C-Check on a Gulfstream 550
AMAC Aerospace will welcome early November a privately-owned Gulfstream 550 for a C-check in Basel, Switzerland. Designated areas undergo a thorough visual inspection and specified components and systems have to prove being operational and functional. It is a...
read moreHigh maintenance season at AMAC Aerospace
In the first week of October, AMAC Aerospace were happy to welcome a Boeing B787 at the hangars in Basel, Switzerland. The privately-owned B787 will undergo a due 12-month check at AMAC’s headquarter. AMAC’s Boeing Team is ready to carry out a C-Check on a Boeing...
read moreNew arrivals at AMAC’s headquarter in Basel, Switzerland
Last week, AMAC Aerospace were pleased to welcome in its headquarter at the EuroAirport Basel a Head of State McDonnell Douglas MD-87; AMAC’s team will install a new generation of the Cockpit Voice Recorder (‘CVR’) and a Flight Data Recorder (‘FDR’) system. AMAC has...
read moreAircraft cabin disinfection services at AMAC Aerospace
“We care. Fly safe.” In the current pandemic Covid-19, safety matters even more. AMAC Aerospace is offering aircraft cabin disinfection services at their hangars in Basel, Switzerland as well as in Bodrum and Istanbul, Turkey. For any type of aircraft, safe and...
read moreNew Ka-Band installations on two Boeing BBJ737 and a new maintenance project on a McDonnell Douglas MD-87
AMAC Aerospace are happy to welcome two Boeing BBJ737 in Basel, Switzerland. The owner of the two aircraft commissioned AMAC’s Boeing team to carry out two Ka-Band installations. The ground time will be used to perform also base maintenance checks. Mid-September, a...
read moreSeveral new projects for AMAC Aerospace
An annual inspection on a Bombardier Challenger 605 has been awarded to AMAC Aerospace. The privately-owned aircraft already arrived at AMAC’s hangar in Basel, Switzerland. On a Bombardier Global 6000, AMAC’s experts are going to carry out a Pre-Purchase Inspection...
read more